We should send special control command to tell device start or stop transmitting a data.
In Bi-Directional mode this cmd`s are not required.
---
drivers/usb/serial/metro-usb.c | 44 ++++++++++++++++++++++++++++++++++++++++
1 files changed, 44 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/metro-usb.c b/drivers/usb/serial/metro-usb.c
index 6dba779..f9c73c5 100644
--- a/drivers/usb/serial/metro-usb.c
+++ b/drivers/usb/serial/metro-usb.c
@@ -56,6 +56,38 @@ MODULE_DEVICE_TABLE(usb, id_table);
/* Input parameter constants. */
static bool debug;
+/* UNI-Directional mode commands for device configure */
+static char open_cmd = 0x80;
+static char close_cmd = 0xFF;
+
+inline int metrousb_is_unidirectional_mode(struct usb_serial_port *port)
+{
+ __u16 product_id = le16_to_cpu(
+ port->serial->dev->descriptor.idProduct);
+
+ return product_id == FOCUS_PRODUCT_ID_UNI;
+}
+
+static int metrousb_send_unidirectional_cmd(u8 cmd, struct usb_serial_port *port)
+{
+ int ret;
+ int actual_len;
+ u8 buf_cmd = cmd;
+
+ if(!metrousb_is_unidirectional_mode(port))
+ return 0;
+
+ ret = usb_interrupt_msg(port->serial->dev,
+ usb_sndintpipe(port->serial->dev, port->interrupt_out_endpointAddress),
+ &buf_cmd, sizeof(buf_cmd),
+ &actual_len, USB_CTRL_SET_TIMEOUT);
+ if (ret < 0)
+ return ret;
+ else if (actual_len != sizeof(buf_cmd))
+ return -EIO;
+ return 0;
+}
+
static void metrousb_read_int_callback(struct urb *urb)
{
struct usb_serial_port *port = urb->context;
@@ -154,6 +186,9 @@ static void metrousb_cleanup(struct usb_serial_port *port)
usb_unlink_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_in_urb);
}
+
+ /* Send deactivate cmd to device */
+ metrousb_send_unidirectional_cmd(close_cmd, port);
}
}
@@ -205,6 +240,15 @@ static int metrousb_open(struct tty_struct *tty, struct usb_serial_port *port)
goto exit;
}
+ /* Send activate cmd to device */
+ result = metrousb_send_unidirectional_cmd(open_cmd, port);
+ if (result) {
+ dev_err(&port->dev,
+ "%s - failed to configure device for port number=%d, error code=%d\n"
+ , __FUNCTION__, port->number, result);
+ goto exit;
+ }
+
dev_dbg(&port->dev, "%s - port open\n", __func__);
exit:
return result;
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
