Strange problem with booting of Dell Vostro 3750 with USB device connected to USB 3.0 capable port

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,
I have experienced strange problems when switching on the Dell Vostro 3750 laptop with any USB device connected to the USB 3.0 capable connector.
The system simply hangs, after the following error message is displayed:
[Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS

However the same text is displayed also during successful boots (without any device in USB3.0 port).

I have recorded some logs using the netconsole, and I have performed some experiments with removal of xhci-hcd driver (its removal has not cured the problem, even though the device was not recognized without xhci-hcd, when plugged in after boot, it still caused hang of the system when connected during start).

All results are available at: https://bugzilla.kernel.org/show_bug.cgi?id=42844 (I reported it as a problem which may be associated not with USB, but with ACPI subsystem.)

I'd appreciate any suggestions regarding further debugging of this problem.

--
Regards,
Wojtek Zabołotny





--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux