Hi All, I have connected Metrologic USB Scanner, but Fedora is not able to attach a driver to it. Is there a generic USB scanner driver which I can associate with it to make it work? This scanner is HID compliant device. Can't I make usbhid driver to make the scanner work? The sources from Metrologic said that it should work in USB Keyboard emulation mode. How to enable this? <<< dmesg snip >>> [ 7002.199153] usb 8-2: new low speed USB device using uhci_hcd and address 18 [ 7002.373938] usb 8-2: New USB device found, idVendor=0c2e, idProduct=0200 [ 7002.373943] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7002.373946] usb 8-2: Product: Honeywell Scanning and Mobility Scanner [ 7002.373949] usb 8-2: Manufacturer: Honeywell Scanning and Mobility [ 7002.399070] input: Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input13 [ 7002.399170] generic-usb 0003:0C2E:0200.000B: input,hidraw2: USB HID v1.11 Keyboard [Honeywell Scanning and Mobility Honeywell Scanning and Mobility Scanner] on usb-0000:00:1d.2-2/input0 [ 7008.463407] usb 8-2: USB disconnect, address 18 [ 7011.780271] usb 8-2: new low speed USB device using uhci_hcd and address 19 [ 7011.957957] usb 8-2: New USB device found, idVendor=0c2e, idProduct=0720 [ 7011.957962] usb 8-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7011.957965] usb 8-2: Product: Honeywell Scanning and Mobility Scanner [ 7011.957968] usb 8-2: Manufacturer: Honeywell Scanning and Mobility [root@pe1800xs ~]# cat /proc/bus/usb/devices T: Bus=08 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 19 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0c2e ProdID=0720 Rev= 1.00 S: Manufacturer=Honeywell Scanning and Mobility S: Product=Honeywell Scanning and Mobility Scanner C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=02(O) Atr=03(Int.) MxPS= 8 Ivl=10ms E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms -- Thanks & Regards, Manavendra Nath Manav -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
