This patch adds the core of the peak_usb driver which handles PEAK-System
Technik PCAN USB adapters. It defines the parts which are common to the
PCAN-USB adapters: can network interfaces management, network-to/from-usb
data path interface, timestamps management...
Tested-by: Oliver Hartkopp <socketcan@xxxxxxxxxxxx>
Acked-by: Wolfgang Grandegger <wg@xxxxxxxxxxxxxx>
Signed-off-by: Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
---
v7 changelog (pcan_usb_core.c only):
- use of print_hex_dump() in dump_mem() function
- use of monotonic clock in packets timestamp
drivers/net/can/usb/Kconfig | 6 +
drivers/net/can/usb/Makefile | 1 +
drivers/net/can/usb/peak_usb/Makefile | 2 +
drivers/net/can/usb/peak_usb/pcan_usb_core.c | 951 ++++++++++++++++++++++++++
drivers/net/can/usb/peak_usb/pcan_usb_core.h | 146 ++++
5 files changed, 1106 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/can/usb/peak_usb/Makefile
create mode 100644 drivers/net/can/usb/peak_usb/pcan_usb_core.c
create mode 100644 drivers/net/can/usb/peak_usb/pcan_usb_core.h
diff --git a/drivers/net/can/usb/Kconfig b/drivers/net/can/usb/Kconfig
index 0452549..0a68768 100644
--- a/drivers/net/can/usb/Kconfig
+++ b/drivers/net/can/usb/Kconfig
@@ -13,4 +13,10 @@ config CAN_ESD_USB2
This driver supports the CAN-USB/2 interface
from esd electronic system design gmbh (http://www.esd.eu).
+config CAN_PEAK_USB
+ tristate "PEAK PCAN-USB/USB Pro interfaces"
+ ---help---
+ This driver supports the PCAN-USB and PCAN-USB Pro adapters
+ from PEAK-System Technik (http://www.peak-system.com).
+
endmenu
diff --git a/drivers/net/can/usb/Makefile b/drivers/net/can/usb/Makefile
index fce3cf1..da6d1d3 100644
--- a/drivers/net/can/usb/Makefile
+++ b/drivers/net/can/usb/Makefile
@@ -4,5 +4,6 @@
obj-$(CONFIG_CAN_EMS_USB) += ems_usb.o
obj-$(CONFIG_CAN_ESD_USB2) += esd_usb2.o
+obj-$(CONFIG_CAN_PEAK_USB) += peak_usb/
ccflags-$(CONFIG_CAN_DEBUG_DEVICES) := -DDEBUG
diff --git a/drivers/net/can/usb/peak_usb/Makefile b/drivers/net/can/usb/peak_usb/Makefile
new file mode 100644
index 0000000..1aefbc8
--- /dev/null
+++ b/drivers/net/can/usb/peak_usb/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_CAN_PEAK_USB) += peak_usb.o
+peak_usb-y = pcan_usb_core.o pcan_usb.o pcan_usb_pro.o
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.c b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
new file mode 100644
index 0000000..d2f91f7
--- /dev/null
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.c
@@ -0,0 +1,951 @@
+/*
+ * CAN driver for PEAK System USB adapters
+ * Derived from the PCAN project file driver/src/pcan_usb_core.c
+ *
+ * Copyright (C) 2003-2010 PEAK System-Technik GmbH
+ * Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
+ *
+ * Many thanks to Klaus Hitschler <klaus.hitschler@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/init.h>
+#include <linux/signal.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/usb.h>
+
+#include <linux/can.h>
+#include <linux/can/dev.h>
+#include <linux/can/error.h>
+
+#include "pcan_usb_core.h"
+
+MODULE_AUTHOR("Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("CAN driver for PEAK-System USB adapters");
+MODULE_LICENSE("GPL v2");
+
+/* Table of devices that work with this driver */
+static struct usb_device_id peak_usb_table[] = {
+ {USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USB_PRODUCT_ID)},
+ {USB_DEVICE(PCAN_USB_VENDOR_ID, PCAN_USBPRO_PRODUCT_ID)},
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, peak_usb_table);
+
+/* List of supported PCAN-USB adapters (NULL terminated list) */
+static struct peak_usb_adapter *peak_usb_adapters_list[] = {
+ &pcan_usb,
+ &pcan_usb_pro,
+ NULL,
+};
+
+/*
+ * dump memory
+ */
+#define DUMP_WIDTH 16
+void dump_mem(char *prompt, void *p, int l)
+{
+ pr_info("%s dumping %s (%d bytes):\n",
+ PCAN_USB_DRIVER_NAME, prompt ? prompt : "memory", l);
+ print_hex_dump(KERN_INFO, PCAN_USB_DRIVER_NAME " ", DUMP_PREFIX_NONE,
+ DUMP_WIDTH, 1, p, l, false);
+}
+
+/*
+ * initialize a time_ref object with usb adapter own settings
+ */
+void peak_usb_init_time_ref(struct peak_time_ref *time_ref,
+ struct peak_usb_adapter *adapter)
+{
+ if (time_ref) {
+ memset(time_ref, 0, sizeof(struct peak_time_ref));
+ time_ref->adapter = adapter;
+ }
+}
+
+static void peak_usb_add_us(struct timeval *tv, u32 delta_us)
+{
+ /* number of s. to add to final time */
+ u32 delta_s = delta_us / 1000000;
+
+ delta_us -= delta_s * 1000000;
+
+ tv->tv_usec += delta_us;
+ if (tv->tv_usec >= 1000000) {
+ tv->tv_usec -= 1000000;
+ delta_s++;
+ }
+ tv->tv_sec += delta_s;
+}
+
+/*
+ * sometimes, another now may be more recent than current one...
+ */
+void peak_usb_update_ts_now(struct peak_time_ref *time_ref, u32 ts_now)
+{
+ time_ref->ts_dev_2 = ts_now;
+
+ /* should wait at least two passes before computing */
+ if (time_ref->tv_host.tv_sec > 0) {
+ u32 delta_ts = time_ref->ts_dev_2 - time_ref->ts_dev_1;
+
+ if (time_ref->ts_dev_2 < time_ref->ts_dev_1)
+ delta_ts &= (1 << time_ref->adapter->ts_used_bits) - 1;
+
+ time_ref->ts_total += delta_ts;
+ }
+}
+
+/*
+ * register device timestamp as now
+ */
+void peak_usb_set_ts_now(struct peak_time_ref *time_ref, u32 ts_now)
+{
+ if (time_ref->tv_host_0.tv_sec == 0) {
+ /* use monotonic clock to correctly compute further deltas */
+ time_ref->tv_host_0 = ktime_to_timeval(ktime_get());
+ time_ref->tv_host.tv_sec = 0;
+ } else {
+ /*
+ * delta_us should not be >= 2^32 => delta_s should be < 4294
+ * handle 32-bits wrapping here: if count of s. reaches 4200,
+ * reset counters and change time base
+ */
+ if (time_ref->tv_host.tv_sec != 0) {
+ u32 delta_s = time_ref->tv_host.tv_sec
+ - time_ref->tv_host_0.tv_sec;
+ if (delta_s > 4200) {
+ time_ref->tv_host_0 = time_ref->tv_host;
+ time_ref->ts_total = 0;
+ }
+ }
+
+ time_ref->tv_host = ktime_to_timeval(ktime_get());
+ time_ref->tick_count++;
+ }
+
+ time_ref->ts_dev_1 = time_ref->ts_dev_2;
+ peak_usb_update_ts_now(time_ref, ts_now);
+}
+
+/*
+ * compute timeval according to current ts and time_ref data
+ */
+void peak_usb_get_ts_tv(struct peak_time_ref *time_ref, u32 ts,
+ struct timeval *tv)
+{
+ /* protect from getting timeval before setting now */
+ if (time_ref->tv_host.tv_sec > 0) {
+ u64 delta_us;
+
+ delta_us = ts - time_ref->ts_dev_2;
+ if (ts < time_ref->ts_dev_2)
+ delta_us &= (1 << time_ref->adapter->ts_used_bits) - 1;
+
+ delta_us += time_ref->ts_total;
+
+ delta_us *= time_ref->adapter->us_per_ts_scale;
+ delta_us >>= time_ref->adapter->us_per_ts_shift;
+
+ *tv = time_ref->tv_host_0;
+ peak_usb_add_us(tv, (u32)delta_us);
+ } else {
+ *tv = ktime_to_timeval(ktime_get());
+ }
+}
+
+/*
+ * callback for bulk Rx urb
+ */
+static void peak_usb_read_bulk_callback(struct urb *urb)
+{
+ struct peak_usb_device *dev = urb->context;
+ struct net_device *netdev;
+ int err;
+
+ netdev = dev->netdev;
+
+ if (!netif_device_present(netdev))
+ return;
+
+ /* check reception status */
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+
+ case -EILSEQ:
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+ return;
+
+ default:
+ if (net_ratelimit())
+ netdev_err(netdev,
+ "Rx urb aborted (%d)\n", urb->status);
+ goto resubmit_urb;
+ }
+
+ /* protect from any incoming empty msgs */
+ if ((urb->actual_length > 0) && (dev->adapter->dev_decode_buf)) {
+ /* handle these kinds of msgs only if _start callback called */
+ if (dev->state & PCAN_USB_STATE_STARTED) {
+ err = dev->adapter->dev_decode_buf(dev, urb);
+ if (err)
+ dump_mem("received usb message",
+ urb->transfer_buffer,
+ urb->transfer_buffer_length);
+ }
+ }
+
+resubmit_urb:
+ usb_fill_bulk_urb(urb, dev->udev,
+ usb_rcvbulkpipe(dev->udev, dev->ep_msg_in),
+ urb->transfer_buffer, dev->adapter->rx_buffer_size,
+ peak_usb_read_bulk_callback, dev);
+
+ usb_anchor_urb(urb, &dev->rx_submitted);
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (!err)
+ return;
+
+ usb_unanchor_urb(urb);
+
+ if (err == -ENODEV)
+ netif_device_detach(netdev);
+ else
+ netdev_err(netdev, "failed resubmitting read bulk urb: %d\n",
+ err);
+}
+
+/*
+ * callback for bulk Tx urb
+ */
+static void peak_usb_write_bulk_callback(struct urb *urb)
+{
+ struct peak_tx_urb_context *context = urb->context;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
+
+ BUG_ON(!context);
+
+ dev = context->dev;
+ netdev = dev->netdev;
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ if (!netif_device_present(netdev))
+ return;
+
+ /* check tx status */
+ switch (urb->status) {
+ case 0:
+ /* transmission complete */
+ netdev->stats.tx_packets++;
+ netdev->stats.tx_bytes += context->dlc;
+
+ /* prevent tx timeout */
+ netdev->trans_start = jiffies;
+ break;
+
+ default:
+ if (net_ratelimit())
+ netdev_err(netdev, "Tx urb aborted (%d)\n",
+ urb->status);
+ case -EPROTO:
+ case -ENOENT:
+ case -ECONNRESET:
+ case -ESHUTDOWN:
+
+ break;
+ }
+
+ /* should always release echo skb and corresponding context */
+ can_get_echo_skb(netdev, context->echo_index);
+ context->echo_index = PCAN_USB_MAX_TX_URBS;
+
+ /* do wakeup tx queue in case of success only */
+ if (!urb->status)
+ netif_wake_queue(netdev);
+}
+
+/*
+ * called by netdev to send one skb on the CAN interface.
+ */
+static netdev_tx_t peak_usb_ndo_start_xmit(struct sk_buff *skb,
+ struct net_device *netdev)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+ struct peak_tx_urb_context *context = NULL;
+ struct net_device_stats *stats = &netdev->stats;
+ struct can_frame *cf = (struct can_frame *)skb->data;
+ struct urb *urb;
+ u8 *obuf;
+ int i, err;
+ size_t size = dev->adapter->tx_buffer_size;
+
+ if (can_dropped_invalid_skb(netdev, skb))
+ return NETDEV_TX_OK;
+
+ for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++)
+ if (dev->tx_contexts[i].echo_index == PCAN_USB_MAX_TX_URBS) {
+ context = dev->tx_contexts + i;
+ break;
+ }
+
+ if (!context) {
+ /* should not occur except during restart */
+ return NETDEV_TX_BUSY;
+ }
+
+ urb = context->urb;
+ obuf = urb->transfer_buffer;
+
+ err = dev->adapter->dev_encode_msg(dev, skb, obuf, &size);
+ if (err) {
+ if (net_ratelimit())
+ netdev_err(netdev, "packet dropped\n");
+ dev_kfree_skb(skb);
+ stats->tx_dropped++;
+ return NETDEV_TX_OK;
+ }
+
+ context->echo_index = i;
+ context->dlc = cf->can_dlc;
+
+ usb_anchor_urb(urb, &dev->tx_submitted);
+
+ can_put_echo_skb(skb, netdev, context->echo_index);
+
+ atomic_inc(&dev->active_tx_urbs);
+
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err) {
+ can_free_echo_skb(netdev, context->echo_index);
+
+ usb_unanchor_urb(urb);
+
+ /* this context is not used in fact */
+ context->echo_index = PCAN_USB_MAX_TX_URBS;
+
+ atomic_dec(&dev->active_tx_urbs);
+
+ switch (err) {
+ case -ENODEV:
+ netif_device_detach(netdev);
+ break;
+ default:
+ netdev_warn(netdev, "tx urb submitting failed err=%d\n",
+ err);
+ case -ENOENT:
+ /* cable unplugged */
+ stats->tx_dropped++;
+ }
+ } else {
+ netdev->trans_start = jiffies;
+
+ /* slow down tx path */
+ if (atomic_read(&dev->active_tx_urbs) >= PCAN_USB_MAX_TX_URBS)
+ netif_stop_queue(netdev);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+/*
+ * start the CAN interface.
+ * Rx and Tx urbs are allocated here. Rx urbs are submitted here.
+ */
+static int peak_usb_start(struct peak_usb_device *dev)
+{
+ struct net_device *netdev = dev->netdev;
+ int err, i;
+
+ for (i = 0; i < PCAN_USB_MAX_RX_URBS; i++) {
+ struct urb *urb;
+ u8 *buf;
+
+ /* create a URB, and a buffer for it, to receive usb messages */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ netdev_err(netdev, "No memory left for URBs\n");
+ err = -ENOMEM;
+ break;
+ }
+
+ buf = kmalloc(dev->adapter->rx_buffer_size, GFP_KERNEL);
+ if (!buf) {
+ netdev_err(netdev, "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ err = -ENOMEM;
+ break;
+ }
+
+ usb_fill_bulk_urb(urb, dev->udev,
+ usb_rcvbulkpipe(dev->udev, dev->ep_msg_in),
+ buf, dev->adapter->rx_buffer_size,
+ peak_usb_read_bulk_callback, dev);
+
+ /* ask last usb_free_urb() to also kfree() transfer_buffer */
+ urb->transfer_flags |= URB_FREE_BUFFER;
+ usb_anchor_urb(urb, &dev->rx_submitted);
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err) {
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ usb_unanchor_urb(urb);
+ kfree(buf);
+ usb_free_urb(urb);
+ break;
+ }
+
+ /* drop reference, USB core will take care of freeing it */
+ usb_free_urb(urb);
+ }
+
+ /* did we submit any URBs? Warn if we was not able to submit all urbs */
+ if (i < PCAN_USB_MAX_RX_URBS) {
+ if (i == 0) {
+ netdev_err(netdev, "couldn't setup any rx URB\n");
+ return err;
+ }
+
+ netdev_warn(netdev, "rx performance may be slow\n");
+ }
+
+ /* pre-alloc tx buffers and corresponding urbs */
+ for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++) {
+ struct peak_tx_urb_context *context;
+ struct urb *urb;
+ u8 *buf;
+
+ /* create a URB and a buffer for it, to transmit usb messages */
+ urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!urb) {
+ netdev_err(netdev, "No memory left for URBs\n");
+ err = -ENOMEM;
+ break;
+ }
+
+ buf = kmalloc(dev->adapter->tx_buffer_size, GFP_KERNEL);
+ if (!buf) {
+ netdev_err(netdev, "No memory left for USB buffer\n");
+ usb_free_urb(urb);
+ err = -ENOMEM;
+ break;
+ }
+
+ context = dev->tx_contexts + i;
+ context->dev = dev;
+ context->urb = urb;
+
+ usb_fill_bulk_urb(urb, dev->udev,
+ usb_sndbulkpipe(dev->udev, dev->ep_msg_out),
+ buf, dev->adapter->tx_buffer_size,
+ peak_usb_write_bulk_callback, context);
+
+ /* ask last usb_free_urb() to also kfree() transfer_buffer */
+ urb->transfer_flags |= URB_FREE_BUFFER;
+ }
+
+ /* warn if we were not able to allocate enough tx contexts */
+ if (i < PCAN_USB_MAX_TX_URBS) {
+ if (i == 0) {
+ netdev_err(netdev, "couldn't setup any tx URB\n");
+ return err;
+ }
+
+ netdev_warn(netdev, "tx performance may be slow\n");
+ }
+
+ if (dev->adapter->dev_start) {
+ err = dev->adapter->dev_start(dev);
+ if (err)
+ goto failed;
+ }
+
+ dev->state |= PCAN_USB_STATE_STARTED;
+
+ /* can set bus on now */
+ if (dev->adapter->dev_set_bus) {
+ err = dev->adapter->dev_set_bus(dev, 1);
+ if (err)
+ goto failed;
+ }
+
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ return 0;
+
+failed:
+ if (err == -ENODEV)
+ netif_device_detach(dev->netdev);
+
+ netdev_warn(netdev, "couldn't submit control: %d\n", err);
+
+ return err;
+}
+
+/*
+ * called by netdev to open the corresponding CAN interface.
+ */
+static int peak_usb_ndo_open(struct net_device *netdev)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+ int err;
+
+ /* common open */
+ err = open_candev(netdev);
+ if (err)
+ return err;
+
+ /* finally start device */
+ err = peak_usb_start(dev);
+ if (err) {
+ netdev_err(netdev, "couldn't start device: %d\n", err);
+ close_candev(netdev);
+ return err;
+ }
+
+ dev->open_time = jiffies;
+ netif_start_queue(netdev);
+
+ return 0;
+}
+
+/*
+ * unlink in-flight Rx and Tx urbs and free their memory.
+ */
+static void peak_usb_unlink_all_urbs(struct peak_usb_device *dev)
+{
+ int i;
+
+ /* free all Rx (submitted) urbs */
+ usb_kill_anchored_urbs(&dev->rx_submitted);
+
+ /* free unsubmitted Tx urbs first */
+ for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++) {
+ struct urb *urb = dev->tx_contexts[i].urb;
+
+ if (!urb ||
+ dev->tx_contexts[i].echo_index != PCAN_USB_MAX_TX_URBS) {
+ /*
+ * this urb is already released or always submitted,
+ * let usb core free by itself
+ */
+ continue;
+ }
+
+ usb_free_urb(urb);
+ dev->tx_contexts[i].urb = NULL;
+ }
+
+ /* then free all submitted Tx urbs */
+ usb_kill_anchored_urbs(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+}
+
+/*
+ * called by netdev to close the corresponding CAN interface.
+ */
+static int peak_usb_ndo_stop(struct net_device *netdev)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+
+ dev->state &= ~PCAN_USB_STATE_STARTED;
+ netif_stop_queue(netdev);
+
+ /* unlink all pending urbs and free used memory */
+ peak_usb_unlink_all_urbs(dev);
+
+ if (dev->adapter->dev_stop)
+ dev->adapter->dev_stop(dev);
+
+ close_candev(netdev);
+
+ dev->open_time = 0;
+ dev->can.state = CAN_STATE_STOPPED;
+
+ /* can set bus off now */
+ if (dev->adapter->dev_set_bus) {
+ int err = dev->adapter->dev_set_bus(dev, 0);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * handle end of waiting for the device to reset
+ */
+void peak_usb_restart_complete(struct peak_usb_device *dev)
+{
+ /* finally MUST update can state */
+ dev->can.state = CAN_STATE_ERROR_ACTIVE;
+
+ /* netdev queue can be awaken now */
+ netif_wake_queue(dev->netdev);
+}
+
+void peak_usb_async_complete(struct urb *urb)
+{
+ kfree(urb->transfer_buffer);
+ usb_free_urb(urb);
+}
+
+/*
+ * device (auto-)restart mechanism runs in a timer context =>
+ * MUST handle restart with asynchronous usb transfers
+ */
+static int peak_usb_restart(struct peak_usb_device *dev)
+{
+ struct urb *urb;
+ int err;
+ u8 *buf;
+
+ /*
+ * if device doesn't define any asynchronous restart handler, simply
+ * wake the netdev queue up
+ */
+ if (!dev->adapter->dev_restart_async) {
+ peak_usb_restart_complete(dev);
+ return 0;
+ }
+
+ /* first allocate a urb to handle the asynchronous steps */
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb) {
+ netdev_err(dev->netdev, "no memory left for urb\n");
+ return -ENOMEM;
+ }
+
+ /* also allocate enough space for the commands to send */
+ buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_ATOMIC);
+ if (!buf) {
+ netdev_err(dev->netdev, "no memory left for async cmd\n");
+ usb_free_urb(urb);
+ return -ENOMEM;
+ }
+
+ /* call the device specific handler for the restart */
+ err = dev->adapter->dev_restart_async(dev, urb, buf);
+ if (!err)
+ return 0;
+
+ kfree(buf);
+ usb_free_urb(urb);
+
+ return err;
+}
+
+/*
+ * candev callback used to change CAN mode.
+ * Warning: this is called from a timer context!
+ */
+static int peak_usb_set_mode(struct net_device *netdev, enum can_mode mode)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+ int err = 0;
+
+ if (!dev->open_time)
+ return -EINVAL;
+
+ switch (mode) {
+ case CAN_MODE_START:
+ err = peak_usb_restart(dev);
+ if (err)
+ netdev_err(netdev, "couldn't start device (err %d)\n",
+ err);
+ break;
+
+ default:
+ return -EOPNOTSUPP;
+ }
+
+ return err;
+}
+
+/*
+ * candev callback used to set device bitrate.
+ */
+static int peak_usb_set_bittiming(struct net_device *netdev)
+{
+ struct peak_usb_device *dev = netdev_priv(netdev);
+ struct can_bittiming *bt = &dev->can.bittiming;
+
+ if (dev->adapter->dev_set_bittiming) {
+ int err = dev->adapter->dev_set_bittiming(dev, bt);
+
+ if (err)
+ netdev_info(netdev, "couldn't set bitrate (err %d)\n",
+ err);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct net_device_ops peak_usb_netdev_ops = {
+ .ndo_open = peak_usb_ndo_open,
+ .ndo_stop = peak_usb_ndo_stop,
+ .ndo_start_xmit = peak_usb_ndo_start_xmit,
+};
+
+/*
+ * create one device which is attached to CAN controller #ctrl_idx of the
+ * usb adapter.
+ */
+static int peak_usb_create_dev(struct peak_usb_adapter *peak_usb_adapter,
+ struct usb_interface *intf, int ctrl_idx)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ int sizeof_candev = peak_usb_adapter->sizeof_dev_private;
+ struct peak_usb_device *dev;
+ struct net_device *netdev;
+ int i, err;
+ u16 tmp16;
+
+ if (sizeof_candev < sizeof(struct peak_usb_device))
+ sizeof_candev = sizeof(struct peak_usb_device);
+
+ netdev = alloc_candev(sizeof_candev, PCAN_USB_MAX_TX_URBS);
+ if (!netdev) {
+ dev_err(&intf->dev, "%s: couldn't alloc candev\n",
+ PCAN_USB_DRIVER_NAME);
+ return -ENOMEM;
+ }
+
+ dev = netdev_priv(netdev);
+
+ /* allocate a buffer large enough to send commands */
+ dev->cmd_buf = kmalloc(PCAN_USB_MAX_CMD_LEN, GFP_KERNEL);
+ if (!dev->cmd_buf) {
+ dev_err(&intf->dev, "%s: couldn't alloc cmd buffer\n",
+ PCAN_USB_DRIVER_NAME);
+ err = -ENOMEM;
+ goto lbl_set_intf_data;
+ }
+
+ dev->udev = usb_dev;
+ dev->netdev = netdev;
+ dev->adapter = peak_usb_adapter;
+ dev->ctrl_idx = ctrl_idx;
+ dev->state = PCAN_USB_STATE_CONNECTED;
+
+ dev->ep_msg_in = peak_usb_adapter->ep_msg_in;
+ dev->ep_msg_out = peak_usb_adapter->ep_msg_out[ctrl_idx];
+
+ dev->can.clock = peak_usb_adapter->clock;
+ dev->can.bittiming_const = &peak_usb_adapter->bittiming_const;
+ dev->can.do_set_bittiming = peak_usb_set_bittiming;
+ dev->can.do_set_mode = peak_usb_set_mode;
+ dev->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES |
+ CAN_CTRLMODE_LISTENONLY;
+
+ netdev->netdev_ops = &peak_usb_netdev_ops;
+
+ netdev->flags |= IFF_ECHO; /* we support local echo */
+
+ init_usb_anchor(&dev->rx_submitted);
+
+ init_usb_anchor(&dev->tx_submitted);
+ atomic_set(&dev->active_tx_urbs, 0);
+
+ for (i = 0; i < PCAN_USB_MAX_TX_URBS; i++)
+ dev->tx_contexts[i].echo_index = PCAN_USB_MAX_TX_URBS;
+
+ dev->prev_siblings = usb_get_intfdata(intf);
+ usb_set_intfdata(intf, dev);
+
+ SET_NETDEV_DEV(netdev, &intf->dev);
+
+ err = register_candev(netdev);
+ if (err) {
+ dev_err(&intf->dev, "couldn't register CAN device: %d\n", err);
+ goto lbl_free_cmd_buf;
+ }
+
+ if (dev->prev_siblings)
+ (dev->prev_siblings)->next_siblings = dev;
+
+ /* keep hw revision into the netdevice */
+ tmp16 = le16_to_cpu(usb_dev->descriptor.bcdDevice);
+ dev->device_rev = tmp16 >> 8;
+
+ if (dev->adapter->dev_init) {
+ err = dev->adapter->dev_init(dev);
+ if (err)
+ goto lbl_free_cmd_buf;
+ }
+
+ /* set bus off */
+ if (dev->adapter->dev_set_bus) {
+ err = dev->adapter->dev_set_bus(dev, 0);
+ if (err)
+ goto lbl_free_cmd_buf;
+ }
+
+ /* get device number early */
+ if (dev->adapter->dev_get_device_id)
+ dev->adapter->dev_get_device_id(dev, &dev->device_number);
+
+ netdev_info(netdev, "attached to %s channel %u (device %u)\n",
+ peak_usb_adapter->name, ctrl_idx, dev->device_number);
+
+ return 0;
+
+lbl_free_cmd_buf:
+ kfree(dev->cmd_buf);
+
+lbl_set_intf_data:
+ usb_set_intfdata(intf, dev->prev_siblings);
+ free_candev(netdev);
+
+ return err;
+}
+
+/*
+ * called by the usb core when the device is unplugged from the system
+ */
+static void peak_usb_disconnect(struct usb_interface *intf)
+{
+ struct peak_usb_device *dev;
+
+ /* unregister as many netdev devices as siblings */
+ for (dev = usb_get_intfdata(intf); dev; dev = dev->prev_siblings) {
+ struct net_device *netdev = dev->netdev;
+ char name[IFNAMSIZ];
+
+ dev->state &= ~PCAN_USB_STATE_CONNECTED;
+ strncpy(name, netdev->name, IFNAMSIZ);
+
+ unregister_netdev(netdev);
+ free_candev(netdev);
+
+ kfree(dev->cmd_buf);
+ dev->next_siblings = NULL;
+ if (dev->adapter->dev_free)
+ dev->adapter->dev_free(dev);
+
+ dev_info(&intf->dev, "%s removed\n", name);
+ }
+
+ usb_set_intfdata(intf, NULL);
+}
+
+/*
+ * probe function for new PEAK-System devices
+ */
+static int peak_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct usb_device *usb_dev = interface_to_usbdev(intf);
+ struct peak_usb_adapter *peak_usb_adapter, **pp;
+ int i, err = -ENOMEM;
+
+ usb_dev = interface_to_usbdev(intf);
+
+ /* get corresponding PCAN-USB adapter */
+ for (pp = peak_usb_adapters_list; *pp; pp++)
+ if ((*pp)->device_id == usb_dev->descriptor.idProduct)
+ break;
+
+ peak_usb_adapter = *pp;
+ if (!peak_usb_adapter) {
+ /* should never come except device_id bad usage in this file */
+ pr_err("%s: didn't find device id. 0x%x in devices list\n",
+ PCAN_USB_DRIVER_NAME, usb_dev->descriptor.idProduct);
+ return -ENODEV;
+ }
+
+ /* got corresponding adapter: check if it handles current interface */
+ if (peak_usb_adapter->intf_probe) {
+ err = peak_usb_adapter->intf_probe(intf);
+ if (err)
+ return err;
+ }
+
+ for (i = 0; i < peak_usb_adapter->ctrl_count; i++) {
+ err = peak_usb_create_dev(peak_usb_adapter, intf, i);
+ if (err) {
+ /* deregister already created devices */
+ peak_usb_disconnect(intf);
+ break;
+ }
+ }
+
+ return err;
+}
+
+/* usb specific object needed to register this driver with the usb subsystem */
+static struct usb_driver peak_usb_driver = {
+ .name = PCAN_USB_DRIVER_NAME,
+ .disconnect = peak_usb_disconnect,
+ .probe = peak_usb_probe,
+ .id_table = peak_usb_table,
+};
+
+static int __init peak_usb_init(void)
+{
+ int err;
+
+ /* register this driver with the USB subsystem */
+ err = usb_register(&peak_usb_driver);
+ if (err)
+ pr_err("%s: usb_register failed (err %d)\n",
+ PCAN_USB_DRIVER_NAME, err);
+
+ return err;
+}
+
+static int peak_usb_do_device_exit(struct device *d, void *arg)
+{
+ struct usb_interface *intf = to_usb_interface(d);
+ struct peak_usb_device *dev;
+
+ /* stop as many netdev devices as siblings */
+ for (dev = usb_get_intfdata(intf); dev; dev = dev->prev_siblings) {
+ struct net_device *netdev = dev->netdev;
+
+ if (netif_device_present(netdev))
+ if (dev->adapter->dev_exit)
+ dev->adapter->dev_exit(dev);
+ }
+
+ return 0;
+}
+
+static void __exit peak_usb_exit(void)
+{
+ int err;
+
+ /* last chance do send any synchronous commands here */
+ err = driver_for_each_device(&peak_usb_driver.drvwrap.driver, NULL,
+ NULL, peak_usb_do_device_exit);
+ if (err)
+ pr_err("%s: failed to stop all can devices (err %d)\n",
+ PCAN_USB_DRIVER_NAME, err);
+
+ /* deregister this driver with the USB subsystem */
+ usb_deregister(&peak_usb_driver);
+
+ pr_info("%s: PCAN-USB interfaces driver unloaded\n",
+ PCAN_USB_DRIVER_NAME);
+}
+
+module_init(peak_usb_init);
+module_exit(peak_usb_exit);
diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_core.h b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
new file mode 100644
index 0000000..a948c5a
--- /dev/null
+++ b/drivers/net/can/usb/peak_usb/pcan_usb_core.h
@@ -0,0 +1,146 @@
+/*
+ * CAN driver for PEAK System USB adapters
+ * Derived from the PCAN project file driver/src/pcan_usb_core.c
+ *
+ * Copyright (C) 2003-2010 PEAK System-Technik GmbH
+ * Copyright (C) 2010-2012 Stephane Grosjean <s.grosjean@xxxxxxxxxxxxxxx>
+ *
+ * Many thanks to Klaus Hitschler <klaus.hitschler@xxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published
+ * by the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#ifndef PCAN_USB_CORE_H
+#define PCAN_USB_CORE_H
+
+/* PEAK-System vendor id. */
+#define PCAN_USB_VENDOR_ID 0x0c72
+
+/* supported device ids. */
+#define PCAN_USB_PRODUCT_ID 0x000c
+#define PCAN_USBPRO_PRODUCT_ID 0x000d
+
+#define PCAN_USB_DRIVER_NAME "peak_usb"
+
+/* number of urbs that are submitted for rx/tx per channel */
+#define PCAN_USB_MAX_RX_URBS 4
+#define PCAN_USB_MAX_TX_URBS 10
+
+/* usb adapters maximum channels per usb interface */
+#define PCAN_USB_MAX_CHANNEL 2
+
+/* maximum length of the usb commands sent to/received from the devices */
+#define PCAN_USB_MAX_CMD_LEN 32
+
+struct peak_usb_device;
+
+/* PEAK-System USB adapter descriptor */
+struct peak_usb_adapter {
+ char *name;
+ u32 device_id;
+ struct can_clock clock;
+ struct can_bittiming_const bittiming_const;
+ unsigned int ctrl_count;
+
+ int (*intf_probe)(struct usb_interface *intf);
+
+ int (*dev_init)(struct peak_usb_device *dev);
+ void (*dev_exit)(struct peak_usb_device *dev);
+ void (*dev_free)(struct peak_usb_device *dev);
+ int (*dev_open)(struct peak_usb_device *dev);
+ int (*dev_close)(struct peak_usb_device *dev);
+ int (*dev_set_bittiming)(struct peak_usb_device *dev,
+ struct can_bittiming *bt);
+ int (*dev_set_bus)(struct peak_usb_device *dev, u8 onoff);
+ int (*dev_get_device_id)(struct peak_usb_device *dev, u32 *device_id);
+ int (*dev_decode_buf)(struct peak_usb_device *dev, struct urb *urb);
+ int (*dev_encode_msg)(struct peak_usb_device *dev, struct sk_buff *skb,
+ u8 *obuf, size_t *size);
+ int (*dev_start)(struct peak_usb_device *dev);
+ int (*dev_stop)(struct peak_usb_device *dev);
+ int (*dev_restart_async)(struct peak_usb_device *dev, struct urb *urb,
+ u8 *buf);
+ u8 ep_msg_in;
+ u8 ep_msg_out[PCAN_USB_MAX_CHANNEL];
+ u8 ts_used_bits;
+ u32 ts_period;
+ u8 us_per_ts_shift;
+ u32 us_per_ts_scale;
+
+ int rx_buffer_size;
+ int tx_buffer_size;
+ int sizeof_dev_private;
+};
+
+extern struct peak_usb_adapter pcan_usb;
+extern struct peak_usb_adapter pcan_usb_pro;
+
+struct peak_time_ref {
+ struct timeval tv_host_0, tv_host;
+ u32 ts_dev_1, ts_dev_2;
+ u64 ts_total;
+ u32 tick_count;
+ struct peak_usb_adapter *adapter;
+};
+
+struct peak_tx_urb_context {
+ struct peak_usb_device *dev;
+ u32 echo_index;
+ u8 dlc;
+ struct urb *urb;
+};
+
+#define PCAN_USB_STATE_CONNECTED 0x00000001
+#define PCAN_USB_STATE_STARTED 0x00000002
+
+/* PEAK-System USB device */
+struct peak_usb_device {
+ struct can_priv can;
+ struct peak_usb_adapter *adapter;
+ unsigned int ctrl_idx;
+ int open_time;
+ u32 state;
+
+ struct sk_buff *echo_skb[PCAN_USB_MAX_TX_URBS];
+
+ struct usb_device *udev;
+ struct net_device *netdev;
+
+ atomic_t active_tx_urbs;
+ struct usb_anchor tx_submitted;
+ struct peak_tx_urb_context tx_contexts[PCAN_USB_MAX_TX_URBS];
+
+ u8 *cmd_buf;
+ struct usb_anchor rx_submitted;
+
+ u32 device_number;
+ u8 device_rev;
+
+ u8 ep_msg_in;
+ u8 ep_msg_out;
+
+ u16 bus_load;
+
+ struct peak_usb_device *prev_siblings;
+ struct peak_usb_device *next_siblings;
+};
+
+void dump_mem(char *prompt, void *p, int l);
+
+/* common timestamp management */
+void peak_usb_init_time_ref(struct peak_time_ref *time_ref,
+ struct peak_usb_adapter *adapter);
+void peak_usb_update_ts_now(struct peak_time_ref *time_ref, u32 ts_now);
+void peak_usb_set_ts_now(struct peak_time_ref *time_ref, u32 ts_now);
+void peak_usb_get_ts_tv(struct peak_time_ref *time_ref, u32 ts,
+ struct timeval *tv);
+
+void peak_usb_async_complete(struct urb *urb);
+void peak_usb_restart_complete(struct peak_usb_device *dev);
+#endif
--
1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
