[PATCH] usb: musb: fix shutdown while usb gadget is in use

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If we shutdown without stopping the gadget first or removing the cable,
gadget manages to configure itself again:

root@pandora /root# poweroff
The system is going down NOW!
Requesting system poweroff
[   47.714385] musb-hm halted.
[   48.120697]  gadget: suspend
[   48.123748]  gadget: reset config
[   48.127227]  gadget: ecm deactivated
[   48.130981] usb0: gether_disconnect
[   48.281799]  gadget: high-speed config #1: CDC Ethernet (ECM)
[   48.287872]  gadget: init ecm
[   48.290985]  gadget: notify connect false
[   48.295288]  gadget: notify speed 425984000

This is not only unwanted, it's also happening on half-unitialized
state, after musb_shutdown() has returned, which sometimes causes
hardware to fail to work after reboot. Let's better properly stop
gadget on shutdown too.

This patch moves musb_gadget_cleanup out of musb_free(), which has 2
callsites: probe error path and musb_remove. On probe error path it was
superflous since musb_gadget_cleanup is called explicitly there, and
musb_remove() calls musb_shutdown(), so cleanup will get called as before.

Signed-off-by: Grazvydas Ignotas <notasas@xxxxxxxxx>
---
 drivers/usb/musb/musb_core.c |    5 +++--
 1 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index b2ca6fd..be123a1 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -991,6 +991,9 @@ static void musb_shutdown(struct platform_device *pdev)
 	unsigned long	flags;
 
 	pm_runtime_get_sync(musb->controller);
+
+	musb_gadget_cleanup(musb);
+
 	spin_lock_irqsave(&musb->lock, flags);
 	musb_platform_disable(musb);
 	musb_generic_disable(musb);
@@ -1874,8 +1877,6 @@ static void musb_free(struct musb *musb)
 	sysfs_remove_group(&musb->controller->kobj, &musb_attr_group);
 #endif
 
-	musb_gadget_cleanup(musb);
-
 	if (musb->nIrq >= 0) {
 		if (musb->irq_wake)
 			disable_irq_wake(musb->nIrq);
-- 
1.7.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux