Return EINVAL if new baud_base does not match the current one. The baud_base is device specific and can not be changed. This restores the old (pre-2005) behaviour which was changed due to a misunderstanding regarding this fact (see https://lkml.org/lkml/2005/1/20/84). Reported-by: Torbjörn Lofterud <torbjorn@xxxxxxxxx> Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx> --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 files changed, 1 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c290df9..cd4b59b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1333,8 +1333,7 @@ static int set_serial_info(struct tty_struct *tty, goto check_and_exit; } - if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) { + if (new_serial.baud_base != priv->baud_base) { mutex_unlock(&priv->cfg_lock); return -EINVAL; } -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
