From: Ajay Kumar Gupta <ajay.gupta@xxxxxx> TXMAXP register is not getting programmed correctly for a full speed device as can_bulk_split() have been removed by "0662481: usb: musb: disable double buffering when it's broken" patch. Adding back the case for can_bulk_split() to fix the reset message seen with a full speed stick. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@xxxxxx> Signed-off-by: Felipe Balbi <balbi@xxxxxx> --- drivers/usb/musb/musb_host.c | 4 ++++ 1 files changed, 4 insertions(+), 0 deletions(-) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 60ddba8..79cb0af 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -774,6 +774,10 @@ static void musb_ep_program(struct musb *musb, u8 epnum, if (musb->double_buffer_not_ok) musb_writew(epio, MUSB_TXMAXP, hw_ep->max_packet_sz_tx); + else if (can_bulk_split(musb, qh->type)) + musb_writew(epio, MUSB_TXMAXP, packet_sz + | ((hw_ep->max_packet_sz_tx / + packet_sz) - 1) << 11); else musb_writew(epio, MUSB_TXMAXP, qh->maxpacket | -- 1.7.8 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
