HDRC requires either NOP_USB_XCEIV or TWLX030_USB, and it selects the
right one based on architectures or board.
However, many OMAP2+ boards are excluded from this selection and it's
possible to have a configuration with no transceiver, so HDRC doesn't
work.
What we need is a 'soft' dependency, and this can be achieved by
transforming the 'selects' to 'default'. This way we can have sane
defaults for all OMAP2+ boards, and the ones that need NOP can just
specify that manually.
This simplifies the config from:
CONFIG_USB=y
CONFIG_TWL4030_CORE=y
CONFIG_TWL4030_USB=y
To:
CONFIG_USB=y
CONFIG_TWL4030_CORE=y
And so on.
Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx>
---
drivers/usb/musb/Kconfig | 4 +---
drivers/usb/otg/Kconfig | 3 +++
2 files changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig
index 07a0346..b60d3a5 100644
--- a/drivers/usb/musb/Kconfig
+++ b/drivers/usb/musb/Kconfig
@@ -7,9 +7,7 @@
config USB_MUSB_HDRC
depends on USB && USB_GADGET
depends on (ARM || (BF54x && !BF544) || (BF52x && !BF522 && !BF523))
- select NOP_USB_XCEIV if (ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN)
- select TWL4030_USB if MACH_OMAP_3430SDP
- select TWL6030_USB if MACH_OMAP_4430SDP || MACH_OMAP4_PANDA
+ depends on (NOP_USB_XCEIV || TWL4030_USB || TWL6030_USB)
select USB_OTG_UTILS
select USB_GADGET_DUALSPEED
tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)'
diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig
index c66481a..5beb8b7 100644
--- a/drivers/usb/otg/Kconfig
+++ b/drivers/usb/otg/Kconfig
@@ -60,6 +60,7 @@ config TWL4030_USB
tristate "TWL4030 USB Transceiver Driver"
depends on TWL4030_CORE && REGULATOR_TWL4030
select USB_OTG_UTILS
+ default y if ARCH_OMAP3
help
Enable this to support the USB OTG transceiver on TWL4030
family chips (including the TWL5030 and TPS659x0 devices).
@@ -70,6 +71,7 @@ config TWL6030_USB
tristate "TWL6030 USB Transceiver Driver"
depends on TWL4030_CORE
select USB_OTG_UTILS
+ default y if ARCH_OMAP4
help
Enable this to support the USB OTG transceiver on TWL6030
family chips. This TWL6030 transceiver has the VBUS and ID GND
@@ -81,6 +83,7 @@ config TWL6030_USB
config NOP_USB_XCEIV
tristate "NOP USB Transceiver Driver"
select USB_OTG_UTILS
+ default y if ARCH_DAVINCI || MACH_OMAP3EVM || BLACKFIN
help
this driver is to be used by all the usb transceiver which are either
built-in with usb ip or which are autonomous and doesn't require any
--
1.7.8.rc1.14.g248db
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
