The whole thing depends on USB_MUSB_HDRC, just add an 'if'. Signed-off-by: Felipe Contreras <felipe.contreras@xxxxxxxxx> --- drivers/usb/musb/Kconfig | 14 ++++++++------ 1 files changed, 8 insertions(+), 6 deletions(-) diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index b0a46e4..0844b8f 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -31,9 +31,10 @@ config USB_MUSB_HDRC To compile this driver as a module, choose M here; the module will be called "musb-hdrc". +if USB_MUSB_HDRC + choice prompt "Platform Glue Layer" - depends on USB_MUSB_HDRC config USB_MUSB_DAVINCI tristate "DaVinci" @@ -67,7 +68,6 @@ endchoice config MUSB_PIO_ONLY bool 'Disable DMA (always use PIO)' - depends on USB_MUSB_HDRC default USB_MUSB_TUSB6010 || USB_MUSB_DA8XX || USB_MUSB_AM35X help All data is copied between memory and FIFO by the CPU. @@ -80,30 +80,32 @@ config MUSB_PIO_ONLY config USB_UX500_DMA bool - depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY + depends on !MUSB_PIO_ONLY default USB_MUSB_UX500 help Enable DMA transfers on UX500 platforms. config USB_INVENTRA_DMA bool - depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY + depends on !MUSB_PIO_ONLY default USB_MUSB_OMAP2PLUS || USB_MUSB_BLACKFIN help Enable DMA transfers using Mentor's engine. config USB_TI_CPPI_DMA bool - depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY + depends on !MUSB_PIO_ONLY default USB_MUSB_DAVINCI help Enable DMA transfers when TI CPPI DMA is available. config USB_TUSB_OMAP_DMA bool - depends on USB_MUSB_HDRC && !MUSB_PIO_ONLY + depends on !MUSB_PIO_ONLY depends on USB_MUSB_TUSB6010 depends on ARCH_OMAP default y help Enable DMA transfers on TUSB 6010 when OMAP DMA is available. + +endif # USB_MUSB_HDRC -- 1.7.8.rc1.14.g248db -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
