On Fri, 2011-12-16 at 17:03 +0100, Bjørn Mork wrote:
> Dan Williams <dcbw@xxxxxxxxxx> writes:
> > On Thu, 2011-12-15 at 11:02 +0100, Bjørn Mork wrote:
> >
> > But I agree that eventually the full QMI protocol should be made
> >> available to userspace for other uses. That should be fairly easy to do
> >> if you just proxy the commands. But I'm worring about the interface.
> >> Is the /dev/qmi from GobiNet acceptable? Why isn't it merged yet?
> >
> > It would have to be /dev/qmiX (in case you have more than one
> > QMI-capable card in the system) and it would also have to have the right
> > sysfs entries so that we could match the qmiX entry up with it's parent
> > USB interface. Not entirely sure how to do that.
>
> The idea of creating multiple independent devices and then stitch them
> together again using a sysfs API seems a little backwards to me. How
> about just use ioctls and forward both request and reply? That won't
> support unsolicited notifications, but otherwise it should be enough to
> be useful.
Typically adding more ioctls isn't well received. Plus I don't think
there's a huge reason to do so, because it's really just a stream
protocol that's easily handled from a file descriptor. ioctls add
unecessary structure. Netlink might be a better approach if we want
something there, but any time you think of adding an ioctl you need to
start questioning that thought :) I just don't think ioctls are really
required in this instance.
And we don't really have to stitch devices together; the QMI device is
really just a file descriptor with read/write operations. It's not any
different than a serial device like ttyUSB0. And that fits just fine
into the sysfs hierarchy just like the USB interfaces from the modem do,
and the ethernet device from the modem does. In sysfs they all have a
common ancestor: the USB device they are provided by. That allows
connection managers to find out that ttyUSB0 and ttyUSB1 and usb0 are
all owned by the same device, and that say usb0 is the network device
that must be set up using ttyUSB0. This is what allows hardware
autodetection, otherwise users have to sit around editing files in /etc
to tell the machine things it should already know.
> The attached patch implements straight QMI forwarding. Note that it is
> only intended as a demo, and *not* a submission. I have not yet decided
> whether this is a good idea or not, and I assume that the API should
> receive some more thought and blessings from others than me before
> anything like this can be submitted.
>
> It should maybe even be extended to something a little less
> driver/device specific. I believe a common WWAN API for settings things
> like PIN code and APN would be very useful, in the same way the wireless
> API has made WLAN usage possible without driver specific tools.
Unfortunately there's really too much variation in WWAN modems to make
this happen in the kernel. It's really best left to userspace. Plus,
there are a *ton* of quirks for different devices. On some devices you
can send a command on any AT port, on others it has to be a specific AT
port. AT parsing isn't something we should be doing in the kernel, and
most modems use AT at this point. Others use QMI, some QCDM, some CnS,
some WMC, etc. A common kernel-side WWAN API is just not going to
happen. But in userspace we have various projects like ModemManager
that try to provide that generic API and abstract the differences
between modems. That's my primary interest in this.
>
> But anyway, the demo does work. Using it to send this reqest for
> firmware revision from userspace:
>
> 0000 01 0c 00 00 02 00 00 01 00 23 00 00 00
>
> partly decoded as:
>
> .tf = 0x01
> .len = 0x000c
> .ctrl = 0x00 control point
> .service = 0x02
> .qmicid = 0x00
> .flags = 0x00 request
> .tid = 0x0001
> .msgid = 0x0023
> .len = 000000
>
>
> I get the expected reply:
>
> 0000 01 4c 00 80 02 00 02 01 00 23 00 40 00 02 04 00
> 0010 00 00 00 00 01 36 00 4d 39 32 30 30 42 2d 53 43
> 0020 41 51 44 42 5a 44 2d 33 2e 30 2e 33 35 30 30 32
> 0030 35 54 20 20 31 20 20 5b 41 75 67 20 31 31 20 32
> 0040 30 31 31 20 30 32 3a 30 30 3a 30 30 5d
>
> partly decoded as:
>
> .tf = 0x01
> .len = 0x004c
> .ctrl = 0x80 service
> .service = 0x02
> .qmicid = 0x00
> .flags = 0x02 response
> .tid = 0x0001
> .msgid = 0x0023
> .len = 0x0040
> [0x02] (4) SUCCESS (0x0000) QMI_ERR_NONE
> [0x01] (54) 4d 39 32 30 30 42 2d 53 43 41 51 44 42 5a 44 2d 33 2e 30 2e 33 35 30 30 32 35 54 20 20 31 20 20 5b 41 75 67 20 31 31 20 32 30 31 31 20 30 32 3a 30 30 3a 30 30 5d M9200B-SCAQDBZD-3.0.350025T 1 [Aug 11 2011 02:00:00]
>
>
> This is while having an open connection and sending traffic over it (not
> that that should matter, but anyway..)
>
> > Huawei writes custom firmware for their dongles.
>
> Somehow I find that hard to believe. I can believe that they *build* a
> custom firmware, enabling a vendor specific set of options, setting
> their own USB descriptors etc. And maybe even write some vendor
> specific feature. But I would be surprised if most of their firmware
> code didn't come directly from the chipset vendor example code.
Yeah, I wasn't specific enough. Everyone who uses a Qualcomm chipset
and licenses the firmware sources can modify it. Some vendors just use
the straight Qualcomm firmware (mostly no-name Asian manufacturers).
But many vendors add their own AT commands, write custom protocols (CnS,
WMC, etc), some add custom network transports (Sierra), etc. Huawei has
apparnetly decided to change the USB descriptors too.
> And the same goes for every other dongle maker.
>
> > Gobi devices and other
> > devices that talk QMI don't necessarily have such a full quite of AT
> > commands, yet they all talk the same QMI protocol. It makes sense to
> > have a generic driver for this if we can. That probably means a QMI
> > core (like you've got with the qmi_wwan stuff) and device-specific
> > drives. The Huawei device would use the ECM-like stuff while the Gobi
> > bits would implement what gobi_net does. They might even be almost the
> > same, I haven't looked in a while. But they are similar enough that
> > they should be sharing most of the code.
>
> Yes, I absolutely agree. That's why I tried to keep the qmi specific
> code as driver agnostic as possible. Well, I could probably have done
> better, but it's a start..
So the reason gobi_net wasn't accepted was that with Gobi 1000 and 2000
chipsets, firmware needs to be loaded into the chip. And that firmware
isn't free; you have to get it from the Windows partition of your
machine. So davem rejected it because there was no way distros could
really test it easily since the firmware isn't freely available.
But now the Gobi 3000 stores firmware onboard, so it's worth another try
to get gobi_net upstreamed.
Dan
>
>
> Bjørn
>
> differences between files attachment
> (0001-qmi_wwan-allow-QMI-proxying-via-netdev-ioctl.patch)
> From 250a8a1214ffb80bfc93e7d93f01796564dabd24 Mon Sep 17 00:00:00 2001
> From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= <bjorn@xxxxxxx>
> Date: Fri, 16 Dec 2011 16:31:43 +0100
> Subject: [PATCH] qmi_wwan: allow QMI proxying via netdev ioctl
> MIME-Version: 1.0
> Content-Type: text/plain; charset=UTF-8
> Content-Transfer-Encoding: 8bit
>
> Proxy QMI requests received via ioctl to embedded CDC commands, and
> return the embedded CDC responses. Will not allow QMI_CTL commands.
> Shared subsystem client IDs are allocated on-demand by the driver.
>
> Signed-off-by: Bjørn Mork <bjorn@xxxxxxx>
> ---
> drivers/net/usb/qmi.c | 118 +++++++++++++++++++++++++++++++++++++++
> drivers/net/usb/qmi.h | 6 ++
> drivers/net/usb/qmi_wwan_core.c | 60 ++++++++++++++++++++
> 3 files changed, 184 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/net/usb/qmi.c b/drivers/net/usb/qmi.c
> index 78269a3..b3c022b 100644
> --- a/drivers/net/usb/qmi.c
> +++ b/drivers/net/usb/qmi.c
> @@ -459,6 +459,10 @@ static int qmi_ctl_request_cid(struct qmi_state *qmi, u8 system)
> u8 tlvdata[1] = { system };
> char buf[32];
>
> + /* fail if we have no slot for the cid */
> + if (system >= sizeof(qmi->cid))
> + return -1;
> +
> /* return immediately if a CID is already allocated */
> if (qmi->cid[system])
> return qmi->cid[system];
> @@ -579,6 +583,120 @@ static int qmi_dms_verify_pin(struct qmi_state *qmi)
>
> /* ----- exported API ----- */
>
> +/* proxy QMI requests, using our own client and transaction IDs */
> +int qmi_ioctl_proxy(struct qmi_state *qmi, void __user *arg, size_t buflen)
> +{
> + char *buf;
> + struct qmux *h;
> + struct qmi_msg *m;
> + size_t len;
> + u8 ucid;
> + __le16 utid, tid;
> + unsigned long flags = qmi->flags;
> + int ret = -EFAULT;
> + int timeout = 30;
> +
> + /* we don't allow QMI_CTL, so the minimum QMI message size is: */
> + if (buflen < sizeof(*buf) + sizeof(*m))
> + return -EINVAL;
> +
> +
> + buf = kmalloc(buflen, GFP_ATOMIC);
> + if (!buf)
> + return -ENOMEM;
> +
> + if (copy_from_user(buf, arg, buflen))
> + goto error;
> +
> + /* verify that what we got is a valid QMI message and that we have a CID for the system */
> + h = (struct qmux *)buf;
> + len = h->len + 1; /* total QMUX length including the tf byte */
> +
> +
> +
> + /* sanity. Note that we disallow the QMI_CTL subsystem */
> + if (h->tf != 0x01 || len > buflen || h->service == QMI_CTL) {
> + ret = -EINVAL;
> + goto error;
> + }
> +
> + m = (struct qmi_msg *)h->msg;
> +
> + /* require an exact length match */
> + if (sizeof(*h) + sizeof(*m) + m->len != len) {
> + ret = -EINVAL;
> + goto error;
> + }
> +
> + /* attempt to get a client ID for the requested subsystem */
> + if (qmi_ctl_request_cid(qmi, h->service) < 0)
> + goto error;
> +
> + /* use our private cid and tid, saving the user's so that we can restore them on return */
> + ucid = h->qmicid;
> + utid = h->tid.w;
> + tid = new_tid();
> + h->qmicid = qmi->cid[h->service];
> + h->tid.w = tid;
> +
> + /* turn off async reads and send the request */
> + qmi->flags &= ~QMI_FLAG_RECV;
> + if (usb_control_msg(qmi->dev, usb_sndctrlpipe(qmi->dev, 0),
> + USB_CDC_SEND_ENCAPSULATED_COMMAND,
> + USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
> + 0, qmi->intfnr, buf, len, 1000) != len)
> + goto error;
> +
> + /* read the reply into the same buffer */
> +
> + /* wait a while for the (correct) reply */
> + do {
> + ret = usb_control_msg(qmi->dev, usb_rcvctrlpipe(qmi->dev, 0),
> + USB_CDC_GET_ENCAPSULATED_RESPONSE, USB_DIR_IN|USB_TYPE_CLASS|USB_RECIP_INTERFACE,
> + 0, qmi->intfnr, buf, buflen, 1000);
> + if (ret < 0)
> + goto error;
> +
> + m = qmi_qmux_verify(buf, ret);
> + if (m && h->tid.w == tid) /* got it */
> + break;
> +
> + /* handle other packets returned while waiting for the correct one */
> + if (ret && m) {
> + switch (h->service) {
> + case QMI_CTL:
> + qmi_ctl_parse(qmi, m);
> + break;
> + case QMI_WDS:
> + qmi_wds_parse(qmi, m);
> + break;
> + case QMI_DMS:
> + qmi_dms_parse(qmi, m);
> + }
> + if (qmi_debug)
> + qmi_dump_qmux(qmi, buf, h->len + 1);
> + }
> + msleep(100);
> + } while (timeout-- > 0);
> + if (timeout == 0)
> + goto error;
> +
> + /* restore the users input to hide our internal id's */
> + h->qmicid = ucid;
> + h->tid.w = utid;
> +
> + /* return the reply to the user */
> + if (copy_to_user(arg, buf, h->len + 1))
> + goto error;
> +
> + ret = 0;
> +
> +error:
> + qmi->flags = flags;
> + kfree(buf);
> + return ret;
> +}
> +
> int qmi_reset(struct qmi_state *qmi)
> {
> /* NOTE: We do NOT clear the allocated CIDs! */
> diff --git a/drivers/net/usb/qmi.h b/drivers/net/usb/qmi.h
> index 53ebafe..bf9c8fd 100644
> --- a/drivers/net/usb/qmi.h
> +++ b/drivers/net/usb/qmi.h
> @@ -82,6 +82,12 @@ struct qmi_tlv_response_data {
> } __packed;
>
>
> +/* <linux/if.h> extension */
> +#define IF_IFACE_WWAN 0x1042
> +
> +/* proxy QMI requests via ioctl */
> +extern int qmi_ioctl_proxy(struct qmi_state *qmi, void __user *arg, size_t buflen);
> +
> /* reset state to INIT */
> extern int qmi_reset(struct qmi_state *qmi);
>
> diff --git a/drivers/net/usb/qmi_wwan_core.c b/drivers/net/usb/qmi_wwan_core.c
> index 6d96465..79c3b1a 100644
> --- a/drivers/net/usb/qmi_wwan_core.c
> +++ b/drivers/net/usb/qmi_wwan_core.c
> @@ -8,6 +8,7 @@
>
> #include <linux/module.h>
> #include <linux/netdevice.h>
> +#include <linux/etherdevice.h>
> #include <linux/ethtool.h>
> #include <linux/mii.h>
> #include <linux/usb.h>
> @@ -46,6 +47,57 @@ static void qmi_wwan_cdc_status(struct usbnet *dev, struct urb *urb)
> }
> }
>
> +static int qmi_wwan_ioctl(struct net_device *net, struct ifreq *ifr, int cmd)
> +{
> + struct usbnet *dev = netdev_priv(net);
> + struct if_settings *settings = &ifr->ifr_settings;
> + struct qmi_wwan_state *info = (void *)&dev->data;
> +
> + switch (cmd) {
> + case SIOCDEVPRIVATE + 0: /* get something to verify that the private ioctl protocol */
> + /* FIMXE: implement this! */
> + return 0;
> +
> + case SIOCDEVPRIVATE + 1: /* set SIM PIN */
> + /* FIMXE: implement this! */
> + return 0;
> +
> + case SIOCDEVPRIVATE + 2: /* set APN */
> + if (!capable(CAP_NET_ADMIN))
> + return -EPERM;
> +
> + /* cannot change APN if interface is up */
> + if (net->flags & IFF_UP)
> + return -EBUSY;
> +
> + /* FIMXE: implement this! */
> + return 0;
> +
> + case SIOCDEVPRIVATE + 3: /* proxy QMI */
> + if (!capable(CAP_NET_ADMIN))
> + return -EPERM;
> + if (settings->type != IF_IFACE_WWAN)
> + return -EINVAL;
> + netdev_dbg(net, "proxying userspace QMI request\n");
> + return qmi_ioctl_proxy(info->qmi, settings->ifs_ifsu.fr, settings->size);
> +
> + default:
> + netdev_dbg(net, "ioctl 0x%08x\n", cmd);
> + }
> + return -EINVAL;
> +}
> +
> +/* same as usbnet_netdev_ops but ioctl added */
> +static const struct net_device_ops qmi_wwan_netdev_ops = {
> + .ndo_open = usbnet_open,
> + .ndo_stop = usbnet_stop,
> + .ndo_start_xmit = usbnet_start_xmit,
> + .ndo_tx_timeout = usbnet_tx_timeout,
> + .ndo_set_mac_address = eth_mac_addr,
> + .ndo_validate_addr = eth_validate_addr,
> + .ndo_do_ioctl = qmi_wwan_ioctl,
> +};
> +
> static int qmi_wwan_cdc_ecmlike_bind(struct usbnet *dev, struct usb_interface *intf)
> {
> int status;
> @@ -61,6 +113,10 @@ static int qmi_wwan_cdc_ecmlike_bind(struct usbnet *dev, struct usb_interface *i
> usbnet_cdc_unbind(dev, intf);
> return -1;
> }
> +
> + /* override default usbnet ops so that we can handle ioctls */
> + dev->net->netdev_ops = &qmi_wwan_netdev_ops;
> +
> return 0;
> }
>
> @@ -80,6 +136,10 @@ static int qmi_wwan_cdc_bind(struct usbnet *dev, struct usb_interface *intf)
> return -1;
>
> info->control = intf;
> +
> + /* override default usbnet ops so that we can handle ioctls */
> + dev->net->netdev_ops = &qmi_wwan_netdev_ops;
> +
> return 0;
> }
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
