Rewrite function queue_dtd according to ChipIdea's reference manual.
Remove all unnecessary logic, it will enhance the performance.
Signed-off-by: Neil Zhang <zhangwm@xxxxxxxxxxx>
---
drivers/usb/gadget/mv_udc_core.c | 139 ++++++++++---------------------------
1 files changed, 38 insertions(+), 101 deletions(-)
diff --git a/drivers/usb/gadget/mv_udc_core.c b/drivers/usb/gadget/mv_udc_core.c
index 7c14508..7b91339 100644
--- a/drivers/usb/gadget/mv_udc_core.c
+++ b/drivers/usb/gadget/mv_udc_core.c
@@ -276,11 +276,12 @@ static void done(struct mv_ep *ep, struct mv_req *req, int status)
static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
{
- u32 tmp, epstatus, bit_pos, direction;
struct mv_udc *udc;
struct mv_dqh *dqh;
+ u32 bit_pos, direction;
+ u32 usbcmd, epstatus;
unsigned int loops;
- int readsafe, retval = 0;
+ int retval = 0;
udc = ep->udc;
direction = ep_dir(ep);
@@ -293,30 +294,18 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
lastreq = list_entry(ep->queue.prev, struct mv_req, queue);
lastreq->tail->dtd_next =
req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
- if (readl(&udc->op_regs->epprime) & bit_pos) {
- loops = LOOPS(PRIME_TIMEOUT);
- while (readl(&udc->op_regs->epprime) & bit_pos) {
- if (loops == 0) {
- retval = -ETIME;
- goto done;
- }
- udelay(LOOPS_USEC);
- loops--;
- }
- if (readl(&udc->op_regs->epstatus) & bit_pos)
- goto done;
- }
- readsafe = 0;
+
+ wmb();
+
+ if (readl(&udc->op_regs->epprime) & bit_pos)
+ goto done;
+
loops = LOOPS(READSAFE_TIMEOUT);
- while (readsafe == 0) {
- if (loops == 0) {
- retval = -ETIME;
- goto done;
- }
+ while (1) {
/* start with setting the semaphores */
- tmp = readl(&udc->op_regs->usbcmd);
- tmp |= USBCMD_ATDTW_TRIPWIRE_SET;
- writel(tmp, &udc->op_regs->usbcmd);
+ usbcmd = readl(&udc->op_regs->usbcmd);
+ usbcmd |= USBCMD_ATDTW_TRIPWIRE_SET;
+ writel(usbcmd, &udc->op_regs->usbcmd);
/* read the endpoint status */
epstatus = readl(&udc->op_regs->epstatus) & bit_pos;
@@ -329,98 +318,46 @@ static int queue_dtd(struct mv_ep *ep, struct mv_req *req)
* primed.
*/
if (readl(&udc->op_regs->usbcmd)
- & USBCMD_ATDTW_TRIPWIRE_SET) {
- readsafe = 1;
- }
+ & USBCMD_ATDTW_TRIPWIRE_SET)
+ break;
+
loops--;
+ if (loops == 0) {
+ dev_err(&udc->dev->dev,
+ "Timeout for ATDTW_TRIPWIRE...\n");
+ retval = -ETIME;
+ goto done;
+ }
udelay(LOOPS_USEC);
}
/* Clear the semaphore */
- tmp = readl(&udc->op_regs->usbcmd);
- tmp &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
- writel(tmp, &udc->op_regs->usbcmd);
-
- /* If endpoint is not active, we activate it now. */
- if (!epstatus) {
- if (direction == EP_DIR_IN) {
- struct mv_dtd *curr_dtd = dma_to_virt(
- &udc->dev->dev, dqh->curr_dtd_ptr);
-
- loops = LOOPS(DTD_TIMEOUT);
- while (curr_dtd->size_ioc_sts
- & DTD_STATUS_ACTIVE) {
- if (loops == 0) {
- retval = -ETIME;
- goto done;
- }
- loops--;
- udelay(LOOPS_USEC);
- }
- }
- /* No other transfers on the queue */
+ usbcmd = readl(&udc->op_regs->usbcmd);
+ usbcmd &= USBCMD_ATDTW_TRIPWIRE_CLEAR;
+ writel(usbcmd, &udc->op_regs->usbcmd);
- /* Write dQH next pointer and terminate bit to 0 */
- dqh->next_dtd_ptr = req->head->td_dma
+ if (epstatus)
+ goto done;
+ }
+
+ /* Write dQH next pointer and terminate bit to 0 */
+ dqh->next_dtd_ptr = req->head->td_dma
& EP_QUEUE_HEAD_NEXT_POINTER_MASK;
- dqh->size_ioc_int_sts = 0;
- /*
- * Ensure that updates to the QH will
- * occur before priming.
- */
- wmb();
+ /* clear active and halt bit, in case set from a previous error */
+ dqh->size_ioc_int_sts &= ~(DTD_STATUS_ACTIVE | DTD_STATUS_HALTED);
- /* Prime the Endpoint */
- writel(bit_pos, &udc->op_regs->epprime);
- }
- } else {
- /* Write dQH next pointer and terminate bit to 0 */
- dqh->next_dtd_ptr = req->head->td_dma
- & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
- dqh->size_ioc_int_sts = 0;
-
- /* Ensure that updates to the QH will occur before priming. */
- wmb();
+ /* Ensure that updates to the QH will occure before priming. */
+ wmb();
- /* Prime the Endpoint */
- writel(bit_pos, &udc->op_regs->epprime);
+ /* Prime the Endpoint */
+ writel(bit_pos, &udc->op_regs->epprime);
- if (direction == EP_DIR_IN) {
- /* FIXME add status check after prime the IN ep */
- int prime_again;
- u32 curr_dtd_ptr = dqh->curr_dtd_ptr;
-
- loops = LOOPS(DTD_TIMEOUT);
- prime_again = 0;
- while ((curr_dtd_ptr != req->head->td_dma)) {
- curr_dtd_ptr = dqh->curr_dtd_ptr;
- if (loops == 0) {
- dev_err(&udc->dev->dev,
- "failed to prime %s\n",
- ep->name);
- retval = -ETIME;
- goto done;
- }
- loops--;
- udelay(LOOPS_USEC);
-
- if (loops == (LOOPS(DTD_TIMEOUT) >> 2)) {
- if (prime_again)
- goto done;
- dev_info(&udc->dev->dev,
- "prime again\n");
- writel(bit_pos,
- &udc->op_regs->epprime);
- prime_again = 1;
- }
- }
- }
- }
done:
return retval;
}
+
static struct mv_dtd *build_dtd(struct mv_req *req, unsigned *length,
dma_addr_t *dma, int *is_last)
{
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
