Use struct usb_otg members with OTG specific functions instead
of usb_phy members.
Signed-off-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>
---
drivers/usb/otg/isp1301_omap.c | 176 ++++++++++++++++++++-------------------
1 files changed, 90 insertions(+), 86 deletions(-)
diff --git a/drivers/usb/otg/isp1301_omap.c b/drivers/usb/otg/isp1301_omap.c
index c9a9441..cb73ed3 100644
--- a/drivers/usb/otg/isp1301_omap.c
+++ b/drivers/usb/otg/isp1301_omap.c
@@ -52,7 +52,8 @@ MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver");
MODULE_LICENSE("GPL");
struct isp1301 {
- struct usb_phy otg;
+ struct usb_phy phy;
+ struct usb_otg otg;
struct i2c_client *client;
void (*i2c_release)(struct device *dev);
@@ -236,7 +237,7 @@ isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits)
static inline const char *state_name(struct isp1301 *isp)
{
- return usb_phy_state_string(isp->otg.state);
+ return usb_phy_state_string(isp->phy.state);
}
/*-------------------------------------------------------------------------*/
@@ -251,7 +252,7 @@ static inline const char *state_name(struct isp1301 *isp)
static void power_down(struct isp1301 *isp)
{
- isp->otg.state = USB_PHY_STATE_UNDEFINED;
+ isp->phy.state = USB_PHY_STATE_UNDEFINED;
// isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN);
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND);
@@ -341,7 +342,7 @@ static void a_idle(struct isp1301 *isp, const char *tag)
{
u32 l;
- if (isp->otg.state == USB_PHY_STATE_A_IDLE)
+ if (isp->phy.state == USB_PHY_STATE_A_IDLE)
return;
isp->otg.default_a = 1;
@@ -353,7 +354,7 @@ static void a_idle(struct isp1301 *isp, const char *tag)
isp->otg.gadget->is_a_peripheral = 1;
gadget_suspend(isp);
}
- isp->otg.state = USB_PHY_STATE_A_IDLE;
+ isp->phy.state = USB_PHY_STATE_A_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -365,7 +366,7 @@ static void b_idle(struct isp1301 *isp, const char *tag)
{
u32 l;
- if (isp->otg.state == USB_PHY_STATE_B_IDLE)
+ if (isp->phy.state == USB_PHY_STATE_B_IDLE)
return;
isp->otg.default_a = 0;
@@ -377,7 +378,7 @@ static void b_idle(struct isp1301 *isp, const char *tag)
isp->otg.gadget->is_a_peripheral = 0;
gadget_suspend(isp);
}
- isp->otg.state = USB_PHY_STATE_B_IDLE;
+ isp->phy.state = USB_PHY_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS;
omap_writel(l, OTG_CTRL);
isp->last_otg_ctrl = l;
@@ -478,7 +479,7 @@ static void check_state(struct isp1301 *isp, const char *tag)
default:
break;
}
- if (isp->otg.state == state && !extra)
+ if (isp->phy.state == state && !extra)
return;
pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag,
usb_phy_state_string(state), fsm, state_name(isp),
@@ -502,22 +503,23 @@ static void update_otg1(struct isp1301 *isp, u8 int_src)
if (int_src & INTR_SESS_VLD)
otg_ctrl |= OTG_ASESSVLD;
- else if (isp->otg.state == USB_PHY_STATE_A_WAIT_VFALL) {
+ else if (isp->phy.state == USB_PHY_STATE_A_WAIT_VFALL) {
a_idle(isp, "vfall");
otg_ctrl &= ~OTG_CTRL_BITS;
}
if (int_src & INTR_VBUS_VLD)
otg_ctrl |= OTG_VBUSVLD;
if (int_src & INTR_ID_GND) { /* default-A */
- if (isp->otg.state == USB_PHY_STATE_B_IDLE
- || isp->otg.state == USB_PHY_STATE_UNDEFINED) {
+ if (isp->phy.state == USB_PHY_STATE_B_IDLE
+ || isp->phy.state
+ == USB_PHY_STATE_UNDEFINED) {
a_idle(isp, "init");
return;
}
} else { /* default-B */
otg_ctrl |= OTG_ID;
- if (isp->otg.state == USB_PHY_STATE_A_IDLE
- || isp->otg.state == USB_PHY_STATE_UNDEFINED) {
+ if (isp->phy.state == USB_PHY_STATE_A_IDLE
+ || isp->phy.state == USB_PHY_STATE_UNDEFINED) {
b_idle(isp, "init");
return;
}
@@ -551,14 +553,14 @@ static void otg_update_isp(struct isp1301 *isp)
isp->last_otg_ctrl = otg_ctrl;
otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_B_IDLE:
case USB_PHY_STATE_B_PERIPHERAL:
case USB_PHY_STATE_B_SRP_INIT:
if (!(otg_ctrl & OTG_PULLUP)) {
// if (otg_ctrl & OTG_B_HNPEN) {
if (isp->otg.gadget->b_hnp_enable) {
- isp->otg.state = USB_PHY_STATE_B_WAIT_ACON;
+ isp->phy.state = USB_PHY_STATE_B_WAIT_ACON;
pr_debug(" --> b_wait_acon\n");
}
goto pulldown;
@@ -588,7 +590,7 @@ pulldown:
if (!(isp->otg.host))
otg_ctrl &= ~OTG_DRV_VBUS;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_A_SUSPEND:
if (otg_ctrl & OTG_DRV_VBUS) {
set |= OTG1_VBUS_DRV;
@@ -599,7 +601,7 @@ pulldown:
/* FALLTHROUGH */
case USB_PHY_STATE_A_VBUS_ERR:
- isp->otg.state = USB_PHY_STATE_A_WAIT_VFALL;
+ isp->phy.state = USB_PHY_STATE_A_WAIT_VFALL;
pr_debug(" --> a_wait_vfall\n");
/* FALLTHROUGH */
case USB_PHY_STATE_A_WAIT_VFALL:
@@ -608,7 +610,7 @@ pulldown:
break;
case USB_PHY_STATE_A_IDLE:
if (otg_ctrl & OTG_DRV_VBUS) {
- isp->otg.state = USB_PHY_STATE_A_WAIT_VRISE;
+ isp->phy.state = USB_PHY_STATE_A_WAIT_VRISE;
pr_debug(" --> a_wait_vrise\n");
}
/* FALLTHROUGH */
@@ -628,17 +630,17 @@ pulldown:
if (otg_change & OTG_PULLUP) {
u32 l;
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_B_IDLE:
if (clr & OTG1_DP_PULLUP)
break;
- isp->otg.state = USB_PHY_STATE_B_PERIPHERAL;
+ isp->phy.state = USB_PHY_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
break;
case USB_PHY_STATE_A_SUSPEND:
if (clr & OTG1_DP_PULLUP)
break;
- isp->otg.state = USB_PHY_STATE_A_PERIPHERAL;
+ isp->phy.state = USB_PHY_STATE_A_PERIPHERAL;
pr_debug(" --> a_peripheral\n");
break;
default:
@@ -659,6 +661,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
u32 otg_ctrl;
int ret = IRQ_NONE;
struct isp1301 *isp = _isp;
+ struct usb_otg *otg = &isp->otg;
/* update ISP1301 transceiver from OTG controller */
if (otg_irq & OPRT_CHG) {
@@ -675,7 +678,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
* remote wakeup (SRP, normal) using their own timer
* to give "check cable and A-device" messages.
*/
- if (isp->otg.state == USB_PHY_STATE_B_SRP_INIT)
+ if (isp->phy.state == USB_PHY_STATE_B_SRP_INIT)
b_idle(isp, "srp_timeout");
omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC);
@@ -693,7 +696,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
omap_writel(otg_ctrl, OTG_CTRL);
/* subset of b_peripheral()... */
- isp->otg.state = USB_PHY_STATE_B_PERIPHERAL;
+ isp->phy.state = USB_PHY_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
omap_writew(B_HNP_FAIL, OTG_IRQ_SRC);
@@ -705,9 +708,9 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
state_name(isp), omap_readl(OTG_CTRL));
isp1301_defer_work(isp, WORK_UPDATE_OTG);
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_A_IDLE:
- if (!isp->otg.host)
+ if (!otg->host)
break;
isp1301_defer_work(isp, WORK_HOST_RESUME);
otg_ctrl = omap_readl(OTG_CTRL);
@@ -736,7 +739,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = USB_PHY_STATE_A_WAIT_VFALL;
+ isp->phy.state = USB_PHY_STATE_A_WAIT_VFALL;
omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -750,7 +753,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
otg_ctrl |= OTG_BUSDROP;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = USB_PHY_STATE_A_VBUS_ERR;
+ isp->phy.state = USB_PHY_STATE_A_VBUS_ERR;
omap_writew(A_VBUS_ERR, OTG_IRQ_SRC);
ret = IRQ_HANDLED;
@@ -771,7 +774,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
/* role is peripheral */
if (otg_ctrl & OTG_DRIVER_SEL) {
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_A_IDLE:
b_idle(isp, __func__);
break;
@@ -787,20 +790,20 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL);
}
- if (isp->otg.host) {
- switch (isp->otg.state) {
+ if (otg->host) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_B_WAIT_ACON:
- isp->otg.state = USB_PHY_STATE_B_HOST;
+ isp->phy.state = USB_PHY_STATE_B_HOST;
pr_debug(" --> b_host\n");
kick = 1;
break;
case USB_PHY_STATE_A_WAIT_BCON:
- isp->otg.state = USB_PHY_STATE_A_HOST;
+ isp->phy.state = USB_PHY_STATE_A_HOST;
pr_debug(" --> a_host\n");
break;
case USB_PHY_STATE_A_PERIPHERAL:
- isp->otg.state =
- USB_PHY_STATE_A_WAIT_BCON;
+ isp->phy.state
+ = USB_PHY_STATE_A_WAIT_BCON;
pr_debug(" --> a_wait_bcon\n");
break;
default:
@@ -814,8 +817,7 @@ static irqreturn_t omap_otg_irq(int irq, void *_isp)
ret = IRQ_HANDLED;
if (kick)
- usb_bus_start_enum(isp->otg.host,
- isp->otg.host->otg_port);
+ usb_bus_start_enum(otg->host, otg->host->otg_port);
}
check_state(isp, __func__);
@@ -941,7 +943,7 @@ static void b_peripheral(struct isp1301 *isp)
/* UDC driver just set OTG_BSESSVLD */
isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP);
isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN);
- isp->otg.state = USB_PHY_STATE_B_PERIPHERAL;
+ isp->phy.state = USB_PHY_STATE_B_PERIPHERAL;
pr_debug(" --> b_peripheral\n");
dump_regs(isp, "2periph");
#endif
@@ -949,8 +951,9 @@ static void b_peripheral(struct isp1301 *isp)
static void isp_update_otg(struct isp1301 *isp, u8 stat)
{
+ struct usb_otg *otg = &isp->otg;
u8 isp_stat, isp_bstat;
- enum usb_phy_state state = isp->otg.state;
+ enum usb_phy_state state = isp->phy.state;
if (stat & INTR_BDIS_ACON)
pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp));
@@ -958,7 +961,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
/* start certain state transitions right away */
isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE);
if (isp_stat & INTR_ID_GND) {
- if (isp->otg.default_a) {
+ if (otg->default_a) {
switch (state) {
case USB_PHY_STATE_B_IDLE:
a_idle(isp, "idle");
@@ -973,7 +976,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
* when HNP is used.
*/
if (isp_stat & INTR_VBUS_VLD)
- isp->otg.state = USB_PHY_STATE_A_HOST;
+ isp->phy.state = USB_PHY_STATE_A_HOST;
break;
case USB_PHY_STATE_A_WAIT_VFALL:
if (!(isp_stat & INTR_SESS_VLD))
@@ -981,8 +984,8 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
break;
default:
if (!(isp_stat & INTR_VBUS_VLD))
- isp->otg.state =
- USB_PHY_STATE_A_VBUS_ERR;
+ isp->phy.state
+ = USB_PHY_STATE_A_VBUS_ERR;
break;
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
@@ -991,14 +994,14 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
case USB_PHY_STATE_B_PERIPHERAL:
case USB_PHY_STATE_B_HOST:
case USB_PHY_STATE_B_WAIT_ACON:
- usb_gadget_vbus_disconnect(isp->otg.gadget);
+ usb_gadget_vbus_disconnect(otg->gadget);
break;
default:
break;
}
if (state != USB_PHY_STATE_A_IDLE)
a_idle(isp, "id");
- if (isp->otg.host && state == USB_PHY_STATE_A_IDLE)
+ if (otg->host && state == USB_PHY_STATE_A_IDLE)
isp1301_defer_work(isp, WORK_HOST_RESUME);
isp_bstat = 0;
}
@@ -1008,10 +1011,10 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
/* if user unplugged mini-A end of cable,
* don't bypass A_WAIT_VFALL.
*/
- if (isp->otg.default_a) {
+ if (otg->default_a) {
switch (state) {
default:
- isp->otg.state = USB_PHY_STATE_A_WAIT_VFALL;
+ isp->phy.state = USB_PHY_STATE_A_WAIT_VFALL;
break;
case USB_PHY_STATE_A_WAIT_VFALL:
state = USB_PHY_STATE_A_IDLE;
@@ -1024,7 +1027,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
host_suspend(isp);
isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1,
MC1_BDIS_ACON_EN);
- isp->otg.state = USB_PHY_STATE_B_IDLE;
+ isp->phy.state = USB_PHY_STATE_B_IDLE;
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
l &= ~OTG_CTRL_BITS;
omap_writel(l, OTG_CTRL);
@@ -1035,7 +1038,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
}
isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS);
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_B_PERIPHERAL:
case USB_PHY_STATE_B_WAIT_ACON:
case USB_PHY_STATE_B_HOST:
@@ -1057,7 +1060,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
omap_writel(l, OTG_CTRL);
/* FALLTHROUGH */
case USB_PHY_STATE_B_IDLE:
- if (isp->otg.gadget && (isp_bstat & OTG_B_SESS_VLD)) {
+ if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) {
#ifdef CONFIG_USB_OTG
update_otg1(isp, isp_stat);
update_otg2(isp, isp_bstat);
@@ -1075,7 +1078,7 @@ static void isp_update_otg(struct isp1301 *isp, u8 stat)
}
}
- if (state != isp->otg.state)
+ if (state != isp->phy.state)
pr_debug(" isp, %s -> %s\n",
usb_phy_state_string(state), state_name(isp));
@@ -1133,10 +1136,10 @@ isp1301_work(struct work_struct *work)
* skip A_WAIT_VRISE; hc transitions invisibly
* skip A_WAIT_BCON; same.
*/
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_A_WAIT_BCON:
case USB_PHY_STATE_A_WAIT_VRISE:
- isp->otg.state = USB_PHY_STATE_A_HOST;
+ isp->phy.state = USB_PHY_STATE_A_HOST;
pr_debug(" --> a_host\n");
otg_ctrl = omap_readl(OTG_CTRL);
otg_ctrl |= OTG_A_BUSREQ;
@@ -1145,7 +1148,7 @@ isp1301_work(struct work_struct *work)
omap_writel(otg_ctrl, OTG_CTRL);
break;
case USB_PHY_STATE_B_WAIT_ACON:
- isp->otg.state = USB_PHY_STATE_B_HOST;
+ isp->phy.state = USB_PHY_STATE_B_HOST;
pr_debug(" --> b_host (acon)\n");
break;
case USB_PHY_STATE_B_HOST:
@@ -1276,7 +1279,7 @@ static int isp1301_otg_enable(struct isp1301 *isp)
/* add or disable the host device+driver */
static int
-isp1301_set_host(struct usb_phy *otg, struct usb_bus *host)
+isp1301_set_host(struct usb_otg *otg, struct usb_bus *host)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
@@ -1286,21 +1289,21 @@ isp1301_set_host(struct usb_phy *otg, struct usb_bus *host)
if (!host) {
omap_writew(0, OTG_IRQ_EN);
power_down(isp);
- isp->otg.host = NULL;
+ otg->host = NULL;
return 0;
}
#ifdef CONFIG_USB_OTG
- isp->otg.host = host;
+ otg->host = host;
dev_dbg(&isp->client->dev, "registered host\n");
host_suspend(isp);
- if (isp->otg.gadget)
+ if (otg->gadget)
return isp1301_otg_enable(isp);
return 0;
#elif !defined(CONFIG_USB_GADGET_OMAP)
// FIXME update its refcount
- isp->otg.host = host;
+ otg->host = host;
power_up(isp);
@@ -1332,7 +1335,7 @@ isp1301_set_host(struct usb_phy *otg, struct usb_bus *host)
}
static int
-isp1301_set_peripheral(struct usb_phy *otg, struct usb_gadget *gadget)
+isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget)
{
struct isp1301 *isp = container_of(otg, struct isp1301, otg);
#ifndef CONFIG_USB_OTG
@@ -1344,24 +1347,24 @@ isp1301_set_peripheral(struct usb_phy *otg, struct usb_gadget *gadget)
if (!gadget) {
omap_writew(0, OTG_IRQ_EN);
- if (!isp->otg.default_a)
+ if (!otg->default_a)
enable_vbus_draw(isp, 0);
- usb_gadget_vbus_disconnect(isp->otg.gadget);
- isp->otg.gadget = NULL;
+ usb_gadget_vbus_disconnect(otg->gadget);
+ otg->gadget = NULL;
power_down(isp);
return 0;
}
#ifdef CONFIG_USB_OTG
- isp->otg.gadget = gadget;
+ otg->gadget = gadget;
dev_dbg(&isp->client->dev, "registered gadget\n");
/* gadget driver may be suspended until vbus_connect () */
- if (isp->otg.host)
+ if (otg->host)
return isp1301_otg_enable(isp);
return 0;
#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE)
- isp->otg.gadget = gadget;
+ otg->gadget = gadget;
// FIXME update its refcount
l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK;
@@ -1370,7 +1373,7 @@ isp1301_set_peripheral(struct usb_phy *otg, struct usb_gadget *gadget)
omap_writel(l, OTG_CTRL);
power_up(isp);
- isp->otg.state = USB_PHY_STATE_B_IDLE;
+ isp->phy.state = USB_PHY_STATE_B_IDLE;
if (machine_is_omap_h2() || machine_is_omap_h3())
isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0);
@@ -1411,13 +1414,13 @@ isp1301_set_power(struct usb_phy *dev, unsigned mA)
}
static int
-isp1301_start_srp(struct usb_phy *dev)
+isp1301_start_srp(struct usb_otg *otg)
{
- struct isp1301 *isp = container_of(dev, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg, struct isp1301, otg);
u32 otg_ctrl;
- if (!dev || isp != the_transceiver
- || isp->otg.state != USB_PHY_STATE_B_IDLE)
+ if (!otg || isp != the_transceiver
+ || isp->phy.state != USB_PHY_STATE_B_IDLE)
return -ENODEV;
otg_ctrl = omap_readl(OTG_CTRL);
@@ -1427,7 +1430,7 @@ isp1301_start_srp(struct usb_phy *dev)
otg_ctrl |= OTG_B_BUSREQ;
otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK;
omap_writel(otg_ctrl, OTG_CTRL);
- isp->otg.state = USB_PHY_STATE_B_SRP_INIT;
+ isp->phy.state = USB_PHY_STATE_B_SRP_INIT;
pr_debug("otg: SRP, %s ... %06x\n", state_name(isp),
omap_readl(OTG_CTRL));
@@ -1438,27 +1441,26 @@ isp1301_start_srp(struct usb_phy *dev)
}
static int
-isp1301_start_hnp(struct usb_phy *dev)
+isp1301_start_hnp(struct usb_otg *otg)
{
#ifdef CONFIG_USB_OTG
- struct isp1301 *isp = container_of(dev, struct isp1301, otg);
+ struct isp1301 *isp = container_of(otg, struct isp1301, otg);
u32 l;
- if (!dev || isp != the_transceiver)
+ if (!otg || isp != the_transceiver)
return -ENODEV;
- if (isp->otg.default_a && (isp->otg.host == NULL
- || !isp->otg.host->b_hnp_enable))
+ if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable))
return -ENOTCONN;
- if (!isp->otg.default_a && (isp->otg.gadget == NULL
- || !isp->otg.gadget->b_hnp_enable))
+ if (!otg->default_a && (otg->gadget == NULL
+ || !otg->gadget->b_hnp_enable))
return -ENOTCONN;
/* We want hardware to manage most HNP protocol timings.
* So do this part as early as possible...
*/
- switch (isp->otg.state) {
+ switch (isp->phy.state) {
case USB_PHY_STATE_B_HOST:
- isp->otg.state = USB_PHY_STATE_B_PERIPHERAL;
+ isp->phy.state = USB_PHY_STATE_B_PERIPHERAL;
/* caller will suspend next */
break;
case USB_PHY_STATE_A_HOST:
@@ -1468,7 +1470,7 @@ isp1301_start_hnp(struct usb_phy *dev)
MC1_BDIS_ACON_EN);
#endif
/* caller must suspend then clear A_BUSREQ */
- usb_gadget_vbus_connect(isp->otg.gadget);
+ usb_gadget_vbus_connect(otg->gadget);
l = omap_readl(OTG_CTRL);
l |= OTG_A_SETB_HNPEN;
omap_writel(l, OTG_CTRL);
@@ -1578,12 +1580,14 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
goto fail;
}
- isp->otg.dev = &i2c->dev;
- isp->otg.label = DRIVER_NAME;
+ isp->phy.dev = &i2c->dev;
+ isp->phy.label = DRIVER_NAME;
+ isp->phy.otg = &isp->otg;
+ isp->phy.set_power = isp1301_set_power,
+ isp->otg.phy = &isp->phy;
isp->otg.set_host = isp1301_set_host,
isp->otg.set_peripheral = isp1301_set_peripheral,
- isp->otg.set_power = isp1301_set_power,
isp->otg.start_srp = isp1301_start_srp,
isp->otg.start_hnp = isp1301_start_hnp,
@@ -1603,7 +1607,7 @@ isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id)
dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES);
#endif
- status = otg_set_transceiver(&isp->otg);
+ status = usb_set_transceiver(&isp->phy);
if (status < 0)
dev_err(&i2c->dev, "can't register transceiver, %d\n",
status);
@@ -1641,7 +1645,7 @@ subsys_initcall(isp_init);
static void __exit isp_exit(void)
{
if (the_transceiver)
- otg_set_transceiver(NULL);
+ usb_set_transceiver(NULL);
i2c_del_driver(&isp1301_driver);
}
module_exit(isp_exit);
--
1.7.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
