On Fri, Nov 11, 2011 at 08:38:13PM +0800, Li Yang wrote:
> The original implementation of dequeuing a request in progress
> is not correct. Change to use a correct process and also clean
> up the related functions a little bit.
>
> Signed-off-by: Li Yang <leoli@xxxxxxxxxxxxx>
> ---
> drivers/usb/gadget/fsl_udc_core.c | 62 +++++++++++++++++-------------------
> 1 files changed, 29 insertions(+), 33 deletions(-)
>
> diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
> index b2c44e1..beef9b7 100644
> --- a/drivers/usb/gadget/fsl_udc_core.c
> +++ b/drivers/usb/gadget/fsl_udc_core.c
> @@ -696,12 +696,31 @@ static void fsl_free_request(struct usb_ep *_ep, struct usb_request *_req)
> kfree(req);
> }
>
> -/*-------------------------------------------------------------------------*/
> +/* Actually add a dTD chain to an empty dQH and let go */
> +static void fsl_prime_ep(struct fsl_ep *ep, struct ep_td_struct *td)
> +{
> + struct ep_queue_head *qh = ep->qh;
It seems to can't get the correct qh pointer, you may still need to
use below code to get it
int i = ep_index(ep) * 2 + ep_is_in(ep);
struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
> +
> + /* Write dQH next pointer and terminate bit to 0 */
> + qh->next_dtd_ptr = cpu_to_hc32(td->td_dma
> + & EP_QUEUE_HEAD_NEXT_POINTER_MASK);
> +
> + /* Clear active and halt bit */
> + qh->size_ioc_int_sts &= cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
> + | EP_QUEUE_HEAD_STATUS_HALT));
> +
> + /* Ensure that updates to the QH will occur before priming. */
> + wmb();
> +
> + /* Prime endpoint by writing correct bit to ENDPTPRIME */
> + fsl_writel(ep_is_in(ep) ? (1 << (ep_index(ep) + 16))
> + : (1 << (ep_index(ep))), &dr_regs->endpointprime);
> +}
> +
> +/* Add dTD chain to the dQH of an EP */
> static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
> {
> - int i = ep_index(ep) * 2 + ep_is_in(ep);
> u32 temp, bitmask, tmp_stat;
> - struct ep_queue_head *dQH = &ep->udc->ep_qh[i];
>
> /* VDBG("QH addr Register 0x%8x", dr_regs->endpointlistaddr);
> VDBG("ep_qh[%d] addr is 0x%8x", i, (u32)&(ep->udc->ep_qh[i])); */
> @@ -719,7 +738,7 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
> cpu_to_hc32(req->head->td_dma & DTD_ADDR_MASK);
> /* Read prime bit, if 1 goto done */
> if (fsl_readl(&dr_regs->endpointprime) & bitmask)
> - goto out;
> + return;
>
> do {
> /* Set ATDTW bit in USBCMD */
> @@ -736,28 +755,10 @@ static void fsl_queue_td(struct fsl_ep *ep, struct fsl_req *req)
> fsl_writel(temp & ~USB_CMD_ATDTW, &dr_regs->usbcmd);
>
> if (tmp_stat)
> - goto out;
> + return;
> }
>
> - /* Write dQH next pointer and terminate bit to 0 */
> - temp = req->head->td_dma & EP_QUEUE_HEAD_NEXT_POINTER_MASK;
> - dQH->next_dtd_ptr = cpu_to_hc32(temp);
> -
> - /* Clear active and halt bit */
> - temp = cpu_to_hc32(~(EP_QUEUE_HEAD_STATUS_ACTIVE
> - | EP_QUEUE_HEAD_STATUS_HALT));
> - dQH->size_ioc_int_sts &= temp;
> -
> - /* Ensure that updates to the QH will occur before priming. */
> - wmb();
> -
> - /* Prime endpoint by writing 1 to ENDPTPRIME */
> - temp = ep_is_in(ep)
> - ? (1 << (ep_index(ep) + 16))
> - : (1 << (ep_index(ep)));
> - fsl_writel(temp, &dr_regs->endpointprime);
> -out:
> - return;
> + fsl_prime_ep(ep, req->head);
> }
>
> /* Fill in the dTD structure
> @@ -973,25 +974,20 @@ static int fsl_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req)
>
> /* The request isn't the last request in this ep queue */
> if (req->queue.next != &ep->queue) {
> - struct ep_queue_head *qh;
> struct fsl_req *next_req;
>
> - qh = ep->qh;
> next_req = list_entry(req->queue.next, struct fsl_req,
> queue);
>
> - /* Point the QH to the first TD of next request */
> - fsl_writel((u32) next_req->head, &qh->curr_dtd_ptr);
> + /* prime with dTD of next request */
> + fsl_prime_ep(ep, next_req->head);
> }
> -
> - /* The request hasn't been processed, patch up the TD chain */
> + /* The request hasn't been processed, patch up the TD chain */
> } else {
> struct fsl_req *prev_req;
>
> prev_req = list_entry(req->queue.prev, struct fsl_req, queue);
> - fsl_writel(fsl_readl(&req->tail->next_td_ptr),
> - &prev_req->tail->next_td_ptr);
> -
> + prev_req->tail->next_td_ptr = req->tail->next_td_ptr;
> }
>
> done(ep, req, -ECONNRESET);
After fixing above error, others are ok. I have tested it at i.mx51 bbg board
using 3.2.0-rc2+.
> --
> 1.5.4.3
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Best Regards,
Peter Chen
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
