This patch adds power management support such as suspend and resume
functions.
Signed-off-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
---
v2: removes uses of hcd->state
drivers/usb/host/ohci-s3c2410.c | 55 +++++++++++++++++++++++++++++++++++++-
1 files changed, 53 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c
index a1877c4..c4db73f 100644
--- a/drivers/usb/host/ohci-s3c2410.c
+++ b/drivers/usb/host/ohci-s3c2410.c
@@ -486,15 +486,66 @@ static int __devexit ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+static int ohci_hcd_s3c2410_drv_suspend(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ struct platform_device *pdev = to_platform_device(dev);
+ unsigned long flags;
+ int rc = 0;
+
+ /*
+ * Root hub was already suspended. Disable irq emission and
+ * mark HW unaccessible, bail out if RH has been resumed. Use
+ * the spinlock to properly synchronize with possible pending
+ * RH suspend or resume activity.
+ */
+ spin_lock_irqsave(&ohci->lock, flags);
+ if (ohci->rh_state != OHCI_RH_SUSPENDED) {
+ rc = -EINVAL;
+ goto bail;
+ }
+
+ clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+ s3c2410_stop_hc(pdev);
+bail:
+ spin_unlock_irqrestore(&ohci->lock, flags);
+
+ return rc;
+}
+
+static int ohci_hcd_s3c2410_drv_resume(struct device *dev)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+ struct platform_device *pdev = to_platform_device(dev);
+
+ s3c2410_start_hc(pdev, hcd);
+
+ set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+ ohci_finish_controller_resume(hcd);
+
+ return 0;
+}
+#else
+#define ohci_hcd_s3c2410_drv_suspend NULL
+#define ohci_hcd_s3c2410_drv_resume NULL
+#endif
+
+static const struct dev_pm_ops ohci_hcd_s3c2410_pm_ops = {
+ .suspend = ohci_hcd_s3c2410_drv_suspend,
+ .resume = ohci_hcd_s3c2410_drv_resume,
+};
+
static struct platform_driver ohci_hcd_s3c2410_driver = {
.probe = ohci_hcd_s3c2410_drv_probe,
.remove = __devexit_p(ohci_hcd_s3c2410_drv_remove),
.shutdown = usb_hcd_platform_shutdown,
- /*.suspend = ohci_hcd_s3c2410_drv_suspend, */
- /*.resume = ohci_hcd_s3c2410_drv_resume, */
.driver = {
.owner = THIS_MODULE,
.name = "s3c2410-ohci",
+ .pm = &ohci_hcd_s3c2410_pm_ops,
},
};
--
1.7.1
ÿ淸º{.nÇ+돴윯돪†+%듚ÿ깁負¥Šwÿº{.nÇ+돴¥Š{깸ëþ)í끾èw* jgП¨ ¶‰šŽ듶¢jÿ¾?G«앶ÿ◀ ◁¦j:+v돣ŠwèjØm¶Ÿÿ ? ®w?듺þf＂·hš뤴얎ÿ녪¥
