Problems with NVIDIA's OHCI host controllers persist. After looking carefully through the spec, I finally realized that when a controller is reset it then automatically goes into a SUSPEND state in which it is completely quiescent (no DMA and no IRQs) and from which it will not awaken until the system puts it into the OPERATIONAL state. Therefore there's no need to worry about controllers being in the RESET state for extended periods, or remaining in the OPERATIONAL state during system shutdown. The proper action for device initialization is to put the controller into the RESET state (if it's not there already) and then to issue a software reset. Similarly, the proper action for device shutdown is simply to do a software reset. This patch (as1499) implements such an approach. It simplifies initialization and shutdown, and allows the NVIDIA shutdown-quirk code to be removed. Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Tested-by: Andre "Osku" Schmidt <andre.osku.schmidt@xxxxxxxxxxxxxx> Tested-by: Arno Augustin <Arno.Augustin@xxxxxx> --- Although this patch should eventually end up in the stable kernels, it's a big enough change that I'd like to see it get a fair amount of testing first. Let's get it into the 3.2 release for now, and hold off on putting it into -stable until 3.2 has been in widespread use for a while. drivers/usb/host/ohci-hcd.c | 15 ++++------- drivers/usb/host/ohci-pci.c | 26 -------------------- drivers/usb/host/ohci.h | 1 drivers/usb/host/pci-quirks.c | 54 ++++++++++++++++++------------------------ 4 files changed, 30 insertions(+), 66 deletions(-) Index: usb-3.2/drivers/usb/host/pci-quirks.c =================================================================== --- usb-3.2.orig/drivers/usb/host/pci-quirks.c +++ usb-3.2/drivers/usb/host/pci-quirks.c @@ -37,6 +37,7 @@ #define OHCI_INTRENABLE 0x10 #define OHCI_INTRDISABLE 0x14 #define OHCI_FMINTERVAL 0x34 +#define OHCI_HCFS (3 << 6) /* hc functional state */ #define OHCI_HCR (1 << 0) /* host controller reset */ #define OHCI_OCR (1 << 3) /* ownership change request */ #define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ @@ -466,6 +467,8 @@ static void __devinit quirk_usb_handoff_ { void __iomem *base; u32 control; + u32 fminterval; + int cnt; if (!mmio_resource_enabled(pdev, 0)) return; @@ -498,41 +501,32 @@ static void __devinit quirk_usb_handoff_ } #endif - /* reset controller, preserving RWC (and possibly IR) */ - writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); - readl(base + OHCI_CONTROL); - - /* Some NVIDIA controllers stop working if kept in RESET for too long */ - if (pdev->vendor == PCI_VENDOR_ID_NVIDIA) { - u32 fminterval; - int cnt; + /* disable interrupts */ + writel((u32) ~0, base + OHCI_INTRDISABLE); - /* drive reset for at least 50 ms (7.1.7.5) */ - msleep(50); + /* Reset the USB bus, if the controller isn't already in RESET */ + if (control & OHCI_HCFS) { + /* Go into RESET, preserving RWC (and possibly IR) */ + writel(control & OHCI_CTRL_MASK, base + OHCI_CONTROL); + readl(base + OHCI_CONTROL); - /* software reset of the controller, preserving HcFmInterval */ - fminterval = readl(base + OHCI_FMINTERVAL); - writel(OHCI_HCR, base + OHCI_CMDSTATUS); - - /* reset requires max 10 us delay */ - for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ - if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) - break; - udelay(1); - } - writel(fminterval, base + OHCI_FMINTERVAL); - - /* Now we're in the SUSPEND state with all devices reset - * and wakeups and interrupts disabled - */ + /* drive bus reset for at least 50 ms (7.1.7.5) */ + msleep(50); } - /* - * disable interrupts - */ - writel(~(u32)0, base + OHCI_INTRDISABLE); - writel(~(u32)0, base + OHCI_INTRSTATUS); + /* software reset of the controller, preserving HcFmInterval */ + fminterval = readl(base + OHCI_FMINTERVAL); + writel(OHCI_HCR, base + OHCI_CMDSTATUS); + + /* reset requires max 10 us delay */ + for (cnt = 30; cnt > 0; --cnt) { /* ... allow extra time */ + if ((readl(base + OHCI_CMDSTATUS) & OHCI_HCR) == 0) + break; + udelay(1); + } + writel(fminterval, base + OHCI_FMINTERVAL); + /* Now the controller is safely in SUSPEND and nothing can wake it up */ iounmap(base); } Index: usb-3.2/drivers/usb/host/ohci.h =================================================================== --- usb-3.2.orig/drivers/usb/host/ohci.h +++ usb-3.2/drivers/usb/host/ohci.h @@ -403,7 +403,6 @@ struct ohci_hcd { #define OHCI_QUIRK_HUB_POWER 0x100 /* distrust firmware power/oc setup */ #define OHCI_QUIRK_AMD_PLL 0x200 /* AMD PLL quirk*/ #define OHCI_QUIRK_AMD_PREFETCH 0x400 /* pre-fetch for ISO transfer */ -#define OHCI_QUIRK_SHUTDOWN 0x800 /* nVidia power bug */ // there are also chip quirks/bugs in init logic struct work_struct nec_work; /* Worker for NEC quirk */ Index: usb-3.2/drivers/usb/host/ohci-pci.c =================================================================== --- usb-3.2.orig/drivers/usb/host/ohci-pci.c +++ usb-3.2/drivers/usb/host/ohci-pci.c @@ -175,28 +175,6 @@ static int ohci_quirk_amd700(struct usb_ return 0; } -/* nVidia controllers continue to drive Reset signalling on the bus - * even after system shutdown, wasting power. This flag tells the - * shutdown routine to leave the controller OPERATIONAL instead of RESET. - */ -static int ohci_quirk_nvidia_shutdown(struct usb_hcd *hcd) -{ - struct pci_dev *pdev = to_pci_dev(hcd->self.controller); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - /* Evidently nVidia fixed their later hardware; this is a guess at - * the changeover point. - */ -#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB 0x026d - - if (pdev->device < PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_USB) { - ohci->flags |= OHCI_QUIRK_SHUTDOWN; - ohci_dbg(ohci, "enabled nVidia shutdown quirk\n"); - } - - return 0; -} - static void sb800_prefetch(struct ohci_hcd *ohci, int on) { struct pci_dev *pdev; @@ -260,10 +238,6 @@ static const struct pci_device_id ohci_p PCI_DEVICE(PCI_VENDOR_ID_ATI, 0x4399), .driver_data = (unsigned long)ohci_quirk_amd700, }, - { - PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID), - .driver_data = (unsigned long) ohci_quirk_nvidia_shutdown, - }, /* FIXME for some of the early AMD 760 southbridges, OHCI * won't work at all. blacklist them. Index: usb-3.2/drivers/usb/host/ohci-hcd.c =================================================================== --- usb-3.2.orig/drivers/usb/host/ohci-hcd.c +++ usb-3.2/drivers/usb/host/ohci-hcd.c @@ -389,17 +389,14 @@ ohci_shutdown (struct usb_hcd *hcd) struct ohci_hcd *ohci; ohci = hcd_to_ohci (hcd); - ohci_writel (ohci, OHCI_INTR_MIE, &ohci->regs->intrdisable); - ohci->hc_control = ohci_readl(ohci, &ohci->regs->control); + ohci_writel(ohci, (u32) ~0, &ohci->regs->intrdisable); - /* If the SHUTDOWN quirk is set, don't put the controller in RESET */ - ohci->hc_control &= (ohci->flags & OHCI_QUIRK_SHUTDOWN ? - OHCI_CTRL_RWC | OHCI_CTRL_HCFS : - OHCI_CTRL_RWC); - ohci_writel(ohci, ohci->hc_control, &ohci->regs->control); + /* Software reset, after which the controller goes into SUSPEND */ + ohci_writel(ohci, OHCI_HCR, &ohci->regs->cmdstatus); + ohci_readl(ohci, &ohci->regs->cmdstatus); /* flush the writes */ + udelay(10); - /* flush the writes */ - (void) ohci_readl (ohci, &ohci->regs->control); + ohci_writel(ohci, ohci->fminterval, &ohci->regs->fminterval); } static int check_ed(struct ohci_hcd *ohci, struct ed *ed) -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html