Originally, the runtime PM core would send an idle notification
whenever a suspend attempt failed. The idle callback routine could
then schedule a delayed suspend for some time later.
However this behavior was changed by commit
f71648d73c1650b8b4aceb3856bebbde6daa3b86 (PM / Runtime: Remove idle
notification after failing suspend). No notifications were sent, and
there was no clear mechanism to retry failed suspends.
This caused problems for the usbhid driver, because it fails
autosuspend attempts as long as a key is being held down. Therefore
this patch (as1492) adds a mechanism for retrying failed
autosuspends. If the callback routine updates the last_busy field so
that the next autosuspend expiration time is in the future, the
autosuspend will automatically be rescheduled.
Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Tested-by: Henrik Rydberg <rydberg@xxxxxxxxxxx>
CC: <stable@xxxxxxxxxx>
---
Documentation/power/runtime_pm.txt | 10 ++++++++++
drivers/base/power/runtime.c | 18 ++++++++++++++++--
2 files changed, 26 insertions(+), 2 deletions(-)
Index: usb-3.1/Documentation/power/runtime_pm.txt
===================================================================
--- usb-3.1.orig/Documentation/power/runtime_pm.txt
+++ usb-3.1/Documentation/power/runtime_pm.txt
@@ -789,6 +789,16 @@ will behave normally, not taking the aut
Similarly, if the power.use_autosuspend field isn't set then the autosuspend
helper functions will behave just like the non-autosuspend counterparts.
+Under some circumstances a driver or subsystem may want to prevent a device
+from autosuspending immediately, even though the usage counter is zero and the
+autosuspend delay time has expired. If the ->runtime_suspend() callback
+returns -EAGAIN or -EBUSY, and if the next autosuspend delay expiration time is
+in the future (as it normally would be if the callback invoked
+pm_runtime_mark_last_busy()), the PM core will automatically reschedule the
+autosuspend. The ->runtime_suspend() callback can't do this rescheduling
+itself because no suspend requests of any kind are accepted while the device is
+suspending (i.e., while the callback is running).
+
The implementation is well suited for asynchronous use in interrupt contexts.
However such use inevitably involves races, because the PM core can't
synchronize ->runtime_suspend() callbacks with the arrival of I/O requests.
Index: usb-3.1/drivers/base/power/runtime.c
===================================================================
--- usb-3.1.orig/drivers/base/power/runtime.c
+++ usb-3.1/drivers/base/power/runtime.c
@@ -296,6 +296,9 @@ static int rpm_callback(int (*cb)(struct
* the callback was running then carry it out, otherwise send an idle
* notification for its parent (if the suspend succeeded and both
* ignore_children of parent->power and irq_safe of dev->power are not set).
+ * If ->runtime_suspend failed with -EAGAIN or -EBUSY, and if the RPM_AUTO
+ * flag is set and the next autosuspend-delay expiration time is in the
+ * future, schedule another autosuspend attempt.
*
* This function must be called under dev->power.lock with interrupts disabled.
*/
@@ -416,10 +419,21 @@ static int rpm_suspend(struct device *de
if (retval) {
__update_runtime_status(dev, RPM_ACTIVE);
dev->power.deferred_resume = false;
- if (retval == -EAGAIN || retval == -EBUSY)
+ if (retval == -EAGAIN || retval == -EBUSY) {
dev->power.runtime_error = 0;
- else
+
+ /*
+ * If the callback routine failed an autosuspend, and
+ * if the last_busy time has been updated so that there
+ * is a new autosuspend expiration time, automatically
+ * reschedule another autosuspend.
+ */
+ if ((rpmflags & RPM_AUTO) &&
+ pm_runtime_autosuspend_expiration(dev) != 0)
+ goto repeat;
+ } else {
pm_runtime_cancel_pending(dev);
+ }
wake_up_all(&dev->power.wait_queue);
goto out;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
