There's no need to add driver_data for something
we can fetch from HW.
This also makes our id_table unnecessary - at least
for now -, so we also remove it on the same patch.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/dwc3/core.c | 57 +++++++++++++++++++++++------------------
drivers/usb/dwc3/core.h | 11 ++++++++
drivers/usb/dwc3/dwc3-omap.c | 2 +-
drivers/usb/dwc3/dwc3-pci.c | 4 +-
4 files changed, 46 insertions(+), 28 deletions(-)
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f3fbd1b..50878f2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -324,15 +324,17 @@ static void dwc3_core_exit(struct dwc3 *dwc)
static int __devinit dwc3_probe(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct resource *res;
struct dwc3 *dwc;
- void __iomem *regs;
- unsigned int features = id->driver_data;
+
int ret = -ENOMEM;
int irq;
+
+ void __iomem *regs;
void *mem;
+ u8 mode;
+
mem = kzalloc(sizeof(*dwc) + DWC3_ALIGN_MASK, GFP_KERNEL);
if (!mem) {
dev_err(&pdev->dev, "not enough memory\n");
@@ -395,13 +397,22 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
goto err3;
}
- if (features & DWC3_HAS_PERIPHERAL) {
+ mode = DWC3_MODE(dwc->hwparams.hwparams0);
+
+ switch (mode) {
+ case DWC3_MODE_DRD:
+ case DWC3_MODE_DEVICE:
ret = dwc3_gadget_init(dwc);
if (ret) {
- dev_err(&pdev->dev, "failed to initialized gadget\n");
+ dev_err(&pdev->dev, "failed to initialize gadget\n");
goto err4;
}
+ break;
+ default:
+ dev_err(&pdev->dev, "Unsupported mode of operation %d\n", mode);
+ goto err4;
}
+ dwc->mode = mode;
ret = dwc3_debugfs_init(dwc);
if (ret) {
@@ -414,8 +425,15 @@ static int __devinit dwc3_probe(struct platform_device *pdev)
return 0;
err5:
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (mode) {
+ case DWC3_MODE_DRD:
+ case DWC3_MODE_DEVICE:
dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
err4:
dwc3_core_exit(dwc);
@@ -435,10 +453,8 @@ err0:
static int __devexit dwc3_remove(struct platform_device *pdev)
{
- const struct platform_device_id *id = platform_get_device_id(pdev);
struct dwc3 *dwc = platform_get_drvdata(pdev);
struct resource *res;
- unsigned int features = id->driver_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -447,8 +463,15 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
dwc3_debugfs_exit(dwc);
- if (features & DWC3_HAS_PERIPHERAL)
+ switch (dwc->mode) {
+ case DWC3_MODE_DRD:
+ case DWC3_MODE_DEVICE:
dwc3_gadget_exit(dwc);
+ break;
+ default:
+ /* do nothing */
+ break;
+ }
dwc3_core_exit(dwc);
release_mem_region(res->start, resource_size(res));
@@ -458,28 +481,12 @@ static int __devexit dwc3_remove(struct platform_device *pdev)
return 0;
}
-static const struct platform_device_id dwc3_id_table[] __devinitconst = {
- {
- .name = "dwc3-omap",
- .driver_data = (DWC3_HAS_PERIPHERAL
- | DWC3_HAS_XHCI
- | DWC3_HAS_OTG),
- },
- {
- .name = "dwc3-pci",
- .driver_data = DWC3_HAS_PERIPHERAL,
- },
- { }, /* Terminating Entry */
-};
-MODULE_DEVICE_TABLE(platform, dwc3_id_table);
-
static struct platform_driver dwc3_driver = {
.probe = dwc3_probe,
.remove = __devexit_p(dwc3_remove),
.driver = {
.name = "dwc3",
},
- .id_table = dwc3_id_table,
};
MODULE_AUTHOR("Felipe Balbi <balbi@xxxxxx>");
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 4b6c673..a3ef8f3 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -536,6 +536,15 @@ struct dwc3_hwparams {
u32 hwparams8;
};
+/* HWPARAMS0 */
+#define DWC3_MODE(n) ((n) & 0x7)
+
+#define DWC3_MODE_DEVICE 0
+#define DWC3_MODE_HOST 1
+#define DWC3_MODE_DRD 2
+#define DWC3_MODE_HUB 3
+
+/* HWPARAMS1 */
#define DWC3_NUM_INT(n) (((n) & (0x3f << 15)) >> 15)
/**
@@ -560,6 +569,7 @@ struct dwc3_hwparams {
* @num_event_buffers: calculated number of event buffers
* @maximum_speed: maximum speed requested (mainly for testing purposes)
* @revision: revision register contents
+ * @mode: mode of operation
* @is_selfpowered: true when we are selfpowered
* @three_stage_setup: set if we perform a three phase setup
* @ep0_status_pending: ep0 status response without a req is pending
@@ -602,6 +612,7 @@ struct dwc3 {
u32 num_event_buffers;
u32 maximum_speed;
u32 revision;
+ u32 mode;
#define DWC3_REVISION_173A 0x5533173a
#define DWC3_REVISION_175A 0x5533175a
diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
index 64ce3fc..94765f2 100644
--- a/drivers/usb/dwc3/dwc3-omap.c
+++ b/drivers/usb/dwc3/dwc3-omap.c
@@ -235,7 +235,7 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
goto err1;
}
- dwc3 = platform_device_alloc("dwc3-omap", -1);
+ dwc3 = platform_device_alloc("dwc3", -1);
if (!dwc3) {
dev_err(&pdev->dev, "couldn't allocate dwc3 device\n");
goto err2;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index f77c000..193f1bd 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -118,7 +118,7 @@ static int __devinit dwc3_pci_probe(struct pci_dev *pci,
if (devid < 0)
goto err2;
- dwc3 = platform_device_alloc("dwc3-pci", devid);
+ dwc3 = platform_device_alloc("dwc3", devid);
if (!dwc3) {
dev_err(&pci->dev, "couldn't allocate dwc3 device\n");
goto err3;
@@ -196,7 +196,7 @@ static DEFINE_PCI_DEVICE_TABLE(dwc3_pci_id_table) = {
MODULE_DEVICE_TABLE(pci, dwc3_pci_id_table);
static struct pci_driver dwc3_pci_driver = {
- .name = "pci-dwc3",
+ .name = "dwc3-pci",
.id_table = dwc3_pci_id_table,
.probe = dwc3_pci_probe,
.remove = __devexit_p(dwc3_pci_remove),
--
1.7.6.396.ge0613
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
