[RFC/PATCH 6/7] usb: dwc3: always compile gadget side too

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



We can decide in runtime if that will be used
or not.

Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
 drivers/usb/dwc3/Kconfig   |    2 ++
 drivers/usb/dwc3/Makefile  |    6 +-----
 drivers/usb/dwc3/gadget.h  |   10 ----------
 drivers/usb/gadget/Kconfig |   12 ------------
 4 files changed, 3 insertions(+), 27 deletions(-)

diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
index 2c05ec9..dca0b51 100644
--- a/drivers/usb/dwc3/Kconfig
+++ b/drivers/usb/dwc3/Kconfig
@@ -2,6 +2,8 @@ config USB_DWC3
 	tristate "DesignWare USB3 DRD Core Support"
 	depends on (USB || USB_GADGET)
 	select USB_OTG_UTILS
+	select USB_GADGET_DUALSPEED
+	select USB_GADGET_SUPERSPEED
 	select USB_XHCI_PLATFORM
 	help
 	  Say Y or M here if your system has a Dual Role SuperSpeed
diff --git a/drivers/usb/dwc3/Makefile b/drivers/usb/dwc3/Makefile
index 0926e71..900ae74 100644
--- a/drivers/usb/dwc3/Makefile
+++ b/drivers/usb/dwc3/Makefile
@@ -5,11 +5,7 @@ obj-$(CONFIG_USB_DWC3)			+= dwc3.o
 
 dwc3-y					:= core.o
 dwc3-y					+= host.o
-
-ifneq ($(CONFIG_USB_GADGET_DWC3),)
-	dwc3-y				+= gadget.o ep0.o
-endif
-
+dwc3-y					+= gadget.o ep0.o
 
 ifneq ($(CONFIG_DEBUG_FS),)
 	dwc3-y				+= debugfs.o
diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h
index 71145a4..6dec6d9 100644
--- a/drivers/usb/dwc3/gadget.h
+++ b/drivers/usb/dwc3/gadget.h
@@ -110,18 +110,8 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req)
 	list_move_tail(&req->list, &dep->req_queued);
 }
 
-#if defined(CONFIG_USB_GADGET_DWC3) || defined(CONFIG_USB_GADGET_DWC3_MODULE)
 int dwc3_gadget_init(struct dwc3 *dwc);
 void dwc3_gadget_exit(struct dwc3 *dwc);
-#else
-static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; }
-static inline void dwc3_gadget_exit(struct dwc3 *dwc) { }
-static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
-		unsigned cmd, struct dwc3_gadget_ep_cmd_params *params)
-{
-	return 0;
-}
-#endif
 
 void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req,
 		int status);
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index bb799d5..5a084b9 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -303,18 +303,6 @@ config USB_PXA_U2O
 	  PXA9xx Processor series include a high speed USB2.0 device
 	  controller, which support high speed and full speed USB peripheral.
 
-config USB_GADGET_DWC3
-	tristate "DesignWare USB3.0 (DRD) Controller"
-	depends on USB_DWC3
-	select USB_GADGET_DUALSPEED
-	select USB_GADGET_SUPERSPEED
-	help
-	  DesignWare USB3.0 controller is a SuperSpeed USB3.0 Controller
-	  which can be configured for peripheral-only, host-only, hub-only
-	  and Dual-Role operation. This Controller was first integrated into
-	  the OMAP5 series of processors. More information about the OMAP5
-	  version of this controller, refer to http://www.ti.com/omap5.
-
 #
 # Controllers available in both integrated and discrete versions
 #
-- 
1.7.6.396.ge0613

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux