Re: 3.0.3 oops, mm related?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Monday, September 19, 2011, Anders Eriksson wrote:
> kdump produced this oops dump for me. Not sure what triggered it.

Apparently, a NULL pointer deref in usb_hcd_irq() after a resume
from suspend.

Can you check (using gdb) what code corresponds to
usb_hcd_irq+0x3 in your kernel?
 
> <6>[    0.000000] Initializing cgroup subsys cpuset
> <6>[    0.000000] Initializing cgroup subsys cpu
> <5>[    0.000000] Linux version 3.0.3-dirty (root@tv) (gcc version 4.4.5
> (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #37 SMP PREEMPT Mon Aug 22 08:54:35
> CEST 2011
> <6>[    0.000000] Command line: root=/dev/sda3 hpet=disable crashkernel=128M
> <6>[    0.000000] KERNEL supported cpus:
> <6>[    0.000000]   AMD AuthenticAMD
> <6>[    0.000000] BIOS-provided physical RAM map:
> <6>[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> <6>[    0.000000]  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> <6>[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> <6>[    0.000000]  BIOS-e820: 0000000000100000 - 0000000077ee0000 (usable)
> <6>[    0.000000]  BIOS-e820: 0000000077ee0000 - 0000000077ee3000 (ACPI NVS)
> <6>[    0.000000]  BIOS-e820: 0000000077ee3000 - 0000000077ef0000 (ACPI
> data)
> <6>[    0.000000]  BIOS-e820: 0000000077ef0000 - 0000000077f00000 (reserved)
> <6>[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> <6>[    0.000000]  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> <6>[    0.000000] NX (Execute Disable) protection: active
> <6>[    0.000000] DMI 2.4 present.
> <7>[    0.000000] DMI: System manufacturer System Product Name/M2A-VM
> HDMI, BIOS ASUS M2A-VM HDMI ACPI BIOS Revision 2201 10/22/2008
> <7>[    0.000000] e820 update range: 0000000000000000 - 0000000000010000
> (usable) ==> (reserved)
> <7>[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
> (usable)
> <6>[    0.000000] No AGP bridge found
> <6>[    0.000000] last_pfn = 0x77ee0 max_arch_pfn = 0x400000000
> <7>[    0.000000] MTRR default type: uncachable
> <7>[    0.000000] MTRR fixed ranges enabled:
> <7>[    0.000000]   00000-9FFFF write-back
> <7>[    0.000000]   A0000-BFFFF uncachable
> <7>[    0.000000]   C0000-C7FFF write-protect
> <7>[    0.000000]   C8000-FFFFF uncachable
> <7>[    0.000000] MTRR variable ranges enabled:
> <7>[    0.000000]   0 base 0000000000 mask FFC0000000 write-back
> <7>[    0.000000]   1 base 0040000000 mask FFE0000000 write-back
> <7>[    0.000000]   2 base 0060000000 mask FFF0000000 write-back
> <7>[    0.000000]   3 base 0070000000 mask FFF8000000 write-back
> <7>[    0.000000]   4 base 0077F00000 mask FFFFF00000 uncachable
> <7>[    0.000000]   5 disabled
> <7>[    0.000000]   6 disabled
> <7>[    0.000000]   7 disabled
> <6>[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new
> 0x7010600070106
> <6>[    0.000000] found SMP MP-table at [ffff8800000f6560] f6560
> <7>[    0.000000] initial memory mapped : 0 - 20000000
> <7>[    0.000000] Base memory trampoline at [ffff88000009a000] 9a000
> size 20480
> <6>[    0.000000] init_memory_mapping: 0000000000000000-0000000077ee0000
> <7>[    0.000000]  0000000000 - 0077e00000 page 2M
> <7>[    0.000000]  0077e00000 - 0077ee0000 page 4k
> <7>[    0.000000] kernel direct mapping tables up to 77ee0000 @
> 77edc000-77ee0000
> <6>[    0.000000] Reserving 128MB of memory at 768MB for crashkernel
> (System RAM: 1918MB)
> <4>[    0.000000] ACPI: RSDP 00000000000f8210 00024 (v02 ATI   )
> <4>[    0.000000] ACPI: XSDT 0000000077ee3100 00044 (v01 ATI    ASUSACPI
> 42302E31 AWRD 00000000)
> <4>[    0.000000] ACPI: FACP 0000000077ee8500 000F4 (v03 ATI    ASUSACPI
> 42302E31 AWRD 00000000)
> <4>[    0.000000] ACPI: DSDT 0000000077ee3280 05210 (v01 ATI    ASUSACPI
> 00001000 MSFT 03000000)
> <4>[    0.000000] ACPI: FACS 0000000077ee0000 00040
> <4>[    0.000000] ACPI: SSDT 0000000077ee8740 002CC (v01 PTLTD  POWERNOW
> 00000001  LTP 00000001)
> <4>[    0.000000] ACPI: MCFG 0000000077ee8b00 0003C (v01 ATI    ASUSACPI
> 42302E31 AWRD 00000000)
> <4>[    0.000000] ACPI: APIC 0000000077ee8640 00084 (v01 ATI    ASUSACPI
> 42302E31 AWRD 00000000)
> <7>[    0.000000] ACPI: Local APIC address 0xfee00000
> <7>[    0.000000]  [ffffea0000000000-ffffea0001bfffff] PMD ->
> [ffff880075800000-ffff8800773fffff] on node 0
> <4>[    0.000000] Zone PFN ranges:
> <4>[    0.000000]   DMA      0x00000010 -> 0x00001000
> <4>[    0.000000]   DMA32    0x00001000 -> 0x00100000
> <4>[    0.000000]   Normal   empty
> <4>[    0.000000] Movable zone start PFN for each node
> <4>[    0.000000] early_node_map[2] active PFN ranges
> <4>[    0.000000]     0: 0x00000010 -> 0x0000009f
> <4>[    0.000000]     0: 0x00000100 -> 0x00077ee0
> <7>[    0.000000] On node 0 totalpages: 491119
> <7>[    0.000000]   DMA zone: 56 pages used for memmap
> <7>[    0.000000]   DMA zone: 5 pages reserved
> <7>[    0.000000]   DMA zone: 3922 pages, LIFO batch:0
> <7>[    0.000000]   DMA32 zone: 6661 pages used for memmap
> <7>[    0.000000]   DMA32 zone: 480475 pages, LIFO batch:31
> <6>[    0.000000] Detected use of extended apic ids on hypertransport bus
> <6>[    0.000000] ACPI: PM-Timer IO Port: 0x4008
> <7>[    0.000000] ACPI: Local APIC address 0xfee00000
> <6>[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> <6>[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> <6>[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
> <6>[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
> <6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> <6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> <6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> <6>[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> <6>[    0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> <6>[    0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000,
> GSI 0-23
> <6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> <6>[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> <7>[    0.000000] ACPI: IRQ0 used by override.
> <7>[    0.000000] ACPI: IRQ2 used by override.
> <7>[    0.000000] ACPI: IRQ9 used by override.
> <6>[    0.000000] Using ACPI (MADT) for SMP configuration information
> <6>[    0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
> <7>[    0.000000] nr_irqs_gsi: 40
> <6>[    0.000000] PM: Registered nosave memory: 000000000009f000 -
> 00000000000a0000
> <6>[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
> 00000000000f0000
> <6>[    0.000000] PM: Registered nosave memory: 00000000000f0000 -
> 0000000000100000
> <6>[    0.000000] Allocating PCI resources starting at 77f00000 (gap:
> 77f00000:68100000)
> <6>[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4
> nr_node_ids:1
> <6>[    0.000000] PERCPU: Embedded 24 pages/cpu @ffff880077c00000 s68800
> r8192 d21312 u524288
> <7>[    0.000000] pcpu-alloc: s68800 r8192 d21312 u524288 alloc=1*2097152
> <7>[    0.000000] pcpu-alloc: [0] 0 1 2 3
> <4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping
> on.  Total pages: 484397
> <5>[    0.000000] Kernel command line: root=/dev/sda3 hpet=disable
> crashkernel=128M
> <6>[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
> <6>[    0.000000] Dentry cache hash table entries: 262144 (order: 9,
> 2097152 bytes)
> <6>[    0.000000] Inode-cache hash table entries: 131072 (order: 8,
> 1048576 bytes)
> <6>[    0.000000] Checking aperture...
> <6>[    0.000000] No AGP bridge found
> <6>[    0.000000] Node 0: aperture @ 266000000 size 32 MB
> <6>[    0.000000] Aperture beyond 4GB. Ignoring.
> <6>[    0.000000] Memory: 1792880k/1964928k available (4899k kernel
> code, 452k absent, 171596k reserved, 2346k data, 464k init)
> <6>[    0.000000] Preemptible hierarchical RCU implementation.
> <6>[    0.000000]       CONFIG_RCU_FANOUT set to non-default value of 32
> <6>[    0.000000] NR_IRQS:384
> <6>[    0.000000] Console: colour VGA+ 80x25
> <6>[    0.000000] console [tty0] enabled
> <6>[    0.000000] allocated 15728640 bytes of page_cgroup
> <6>[    0.000000] please try 'cgroup_disable=memory' option if you don't
> want memory cgroups
> <4>[    0.000000] Fast TSC calibration using PIT
> <4>[    0.000000] Detected 2799.546 MHz processor.
> <6>[    0.000000] Marking TSC unstable due to TSCs unsynchronized
> <6>[    0.002039] Calibrating delay loop (skipped), value calculated
> using timer frequency.. 5599.09 BogoMIPS (lpj=2799546)
> <6>[    0.002109] pid_max: default: 32768 minimum: 301
> <6>[    0.002204] Mount-cache hash table entries: 256
> <6>[    0.002392] Initializing cgroup subsys cpuacct
> <6>[    0.002435] Initializing cgroup subsys memory
> <6>[    0.002480] Initializing cgroup subsys devices
> <6>[    0.002515] Initializing cgroup subsys freezer
> <6>[    0.002549] Initializing cgroup subsys blkio
> <7>[    0.003019] tseg: 0077f00000
> <6>[    0.003021] CPU: Physical Processor ID: 0
> <6>[    0.003056] CPU: Processor Core ID: 0
> <6>[    0.003090] mce: CPU supports 5 MCE banks
> <6>[    0.003132] using AMD E400 aware idle routine
> <6>[    0.003198] ACPI: Core revision 20110413
> <6>[    0.005568] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> <6>[    0.016152] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5600+
> stepping 03
> <6>[    0.016998] Performance Events: AMD PMU driver.
> <6>[    0.016998] ... version:                0
> <6>[    0.016998] ... bit width:              48
> <6>[    0.016998] ... generic registers:      4
> <6>[    0.016998] ... value mask:             0000ffffffffffff
> <6>[    0.016998] ... max period:             00007fffffffffff
> <6>[    0.016998] ... fixed-purpose events:   0
> <6>[    0.016998] ... event mask:             000000000000000f
> <6>[    0.028011] Booting Node   0, Processors  #1
> <7>[    0.028073] smpboot cpu 1: start_ip = 9a000
> <6>[    0.099035] Brought up 2 CPUs
> <6>[    0.099070] Total of 2 processors activated (11197.89 BogoMIPS).
> <6>[    0.099465] PM: Registering ACPI NVS region at 77ee0000 (12288 bytes)
> <6>[    0.099465] NET: Registered protocol family 16
> <7>[    0.100024] node 0 link 0: io port [c000, ffff]
> <6>[    0.100024] TOM: 0000000080000000 aka 2048M
> <7>[    0.100043] node 0 link 0: mmio [a0000, bffff]
> <7>[    0.100046] node 0 link 0: mmio [80000000, dfffffff]
> <7>[    0.100048] node 0 link 0: mmio [f0000000, fe02ffff]
> <7>[    0.100051] node 0 link 0: mmio [e0000000, e03fffff]
> <7>[    0.100053] bus: [00, 03] on node 0 link 0
> <7>[    0.100056] bus: 00 index 0 [io  0x0000-0xffff]
> <7>[    0.100058] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
> <7>[    0.100060] bus: 00 index 2 [mem 0x80000000-0xefffffff]
> <7>[    0.100062] bus: 00 index 3 [mem 0xf0000000-0xfcffffffff]
> <6>[    0.100069] ACPI: bus type pci registered
> <6>[    0.100113] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
> 0xe0000000-0xefffffff] (base 0xe0000000)
> <6>[    0.100113] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved
> in E820
> <6>[    0.116130] PCI: Using configuration type 1 for base access
> <6>[    0.121108] bio: create slab <bio-0> at 0
> <7>[    0.122550] ACPI: EC: Look up EC in DSDT
> <6>[    0.125943] ACPI: Interpreter enabled
> <6>[    0.125981] ACPI: (supports S0 S1 S3 S4 S5)
> <6>[    0.126152] ACPI: Using IOAPIC for interrupt routing
> <6>[    0.130214] ACPI: No dock devices found.
> <6>[    0.130214] HEST: Table not found.
> <6>[    0.130991] PCI: Using host bridge windows from ACPI; if
> necessary, use "pci=nocrs" and report a bug
> <6>[    0.131081] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> <6>[    0.131147] pci_root PNP0A03:00: host bridge window [io 
> 0x0000-0x0cf7]
> <6>[    0.131147] pci_root PNP0A03:00: host bridge window [io 
> 0x0d00-0xffff]
> <6>[    0.131147] pci_root PNP0A03:00: host bridge window [mem
> 0x000a0000-0x000bffff]
> <6>[    0.131182] pci_root PNP0A03:00: host bridge window [mem
> 0x000c0000-0x000dffff]
> <6>[    0.131221] pci_root PNP0A03:00: host bridge window [mem
> 0x80000000-0xfebfffff]
> <7>[    0.131269] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600
> <7>[    0.131294] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604
> <7>[    0.131325] pci 0000:00:07.0: [1002:7917] type 1 class 0x000604
> <7>[    0.131345] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
> <7>[    0.131348] pci 0000:00:07.0: PME# disabled
> <7>[    0.131377] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101
> <7>[    0.131394] pci 0000:00:12.0: reg 10: [io  0xff00-0xff07]
> <7>[    0.131404] pci 0000:00:12.0: reg 14: [io  0xfe00-0xfe03]
> <7>[    0.131414] pci 0000:00:12.0: reg 18: [io  0xfd00-0xfd07]
> <7>[    0.131424] pci 0000:00:12.0: reg 1c: [io  0xfc00-0xfc03]
> <7>[    0.131434] pci 0000:00:12.0: reg 20: [io  0xfb00-0xfb0f]
> <7>[    0.131444] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
> <6>[    0.131465] pci 0000:00:12.0: set SATA to AHCI mode
> <7>[    0.131527] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
> <7>[    0.131541] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
> <7>[    0.131605] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
> <7>[    0.131619] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
> <7>[    0.131685] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
> <7>[    0.131698] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
> <7>[    0.131763] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
> <7>[    0.131776] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
> <7>[    0.132031] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
> <7>[    0.132045] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
> <7>[    0.132115] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
> <7>[    0.132135] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
> <7>[    0.132205] pci 0000:00:13.5: supports D1 D2
> <7>[    0.132208] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
> <7>[    0.132212] pci 0000:00:13.5: PME# disabled
> <7>[    0.132233] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
> <7>[    0.132256] pci 0000:00:14.0: reg 10: [io  0x0b00-0x0b0f]
> <7>[    0.132332] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
> <7>[    0.132346] pci 0000:00:14.1: reg 10: [io  0x0000-0x0007]
> <7>[    0.132356] pci 0000:00:14.1: reg 14: [io  0x0000-0x0003]
> <7>[    0.132366] pci 0000:00:14.1: reg 18: [io  0x0000-0x0007]
> <7>[    0.132376] pci 0000:00:14.1: reg 1c: [io  0x0000-0x0003]
> <7>[    0.132386] pci 0000:00:14.1: reg 20: [io  0xf900-0xf90f]
> <7>[    0.132423] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
> <7>[    0.132445] pci 0000:00:14.2: reg 10: [mem 0xfe020000-0xfe023fff
> 64bit]
> <7>[    0.132503] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
> <7>[    0.132507] pci 0000:00:14.2: PME# disabled
> <7>[    0.132522] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
> <7>[    0.132595] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
> <7>[    0.132640] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
> <7>[    0.132655] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
> <7>[    0.132668] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
> <7>[    0.132681] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
> <7>[    0.132720] pci 0000:01:05.0: [1002:791e] type 0 class 0x000300
> <7>[    0.132728] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff
> 64bit pref]
> <7>[    0.132734] pci 0000:01:05.0: reg 18: [mem 0xfdbe0000-0xfdbeffff
> 64bit]
> <7>[    0.132738] pci 0000:01:05.0: reg 20: [io  0xde00-0xdeff]
> <7>[    0.132742] pci 0000:01:05.0: reg 24: [mem 0xfda00000-0xfdafffff]
> <7>[    0.132753] pci 0000:01:05.0: supports D1 D2
> <7>[    0.132762] pci 0000:01:05.2: [1002:7919] type 0 class 0x000403
> <7>[    0.132770] pci 0000:01:05.2: reg 10: [mem 0xfdbfc000-0xfdbfffff
> 64bit]
> <6>[    0.132800] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> <7>[    0.132837] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
> <7>[    0.132840] pci 0000:00:01.0:   bridge window [mem
> 0xfda00000-0xfdbfffff]
> <7>[    0.132844] pci 0000:00:01.0:   bridge window [mem
> 0xf0000000-0xf7ffffff 64bit pref]
> <7>[    0.132883] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200
> <7>[    0.132897] pci 0000:02:00.0: reg 10: [io  0xee00-0xeeff]
> <7>[    0.132921] pci 0000:02:00.0: reg 18: [mem 0xfdfff000-0xfdffffff
> 64bit]
> <7>[    0.132949] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
> <7>[    0.133007] pci 0000:02:00.0: supports D1 D2
> <7>[    0.133008] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
> <7>[    0.133013] pci 0000:02:00.0: PME# disabled
> <6>[    0.133027] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe
> device.  You can enable it with 'pcie_aspm=force'
> <6>[    0.133073] pci 0000:00:07.0: PCI bridge to [bus 02-02]
> <7>[    0.133110] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
> <7>[    0.133113] pci 0000:00:07.0:   bridge window [mem
> 0xfdf00000-0xfdffffff]
> <7>[    0.133116] pci 0000:00:07.0:   bridge window [mem
> 0xfdc00000-0xfdcfffff 64bit pref]
> <7>[    0.133151] pci 0000:03:06.0: [1131:7133] type 0 class 0x000480
> <7>[    0.133173] pci 0000:03:06.0: reg 10: [mem 0xfdeff000-0xfdeff7ff]
> <7>[    0.133260] pci 0000:03:06.0: supports D1 D2
> <7>[    0.133284] pci 0000:03:07.0: [1106:3044] type 0 class 0x000c00
> <7>[    0.133307] pci 0000:03:07.0: reg 10: [mem 0xfdefe000-0xfdefe7ff]
> <7>[    0.133320] pci 0000:03:07.0: reg 14: [io  0xcf00-0xcf7f]
> <7>[    0.133401] pci 0000:03:07.0: supports D2
> <7>[    0.133402] pci 0000:03:07.0: PME# supported from D2 D3hot D3cold
> <7>[    0.133408] pci 0000:03:07.0: PME# disabled
> <6>[    0.133452] pci 0000:00:14.4: PCI bridge to [bus 03-03]
> (subtractive decode)
> <7>[    0.133490] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
> <7>[    0.133495] pci 0000:00:14.4:   bridge window [mem
> 0xfde00000-0xfdefffff]
> <7>[    0.133499] pci 0000:00:14.4:   bridge window [mem
> 0xfdd00000-0xfddfffff pref]
> <7>[    0.133502] pci 0000:00:14.4:   bridge window [io  0x0000-0x0cf7]
> (subtractive decode)
> <7>[    0.133504] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff]
> (subtractive decode)
> <7>[    0.133507] pci 0000:00:14.4:   bridge window [mem
> 0x000a0000-0x000bffff] (subtractive decode)
> <7>[    0.133509] pci 0000:00:14.4:   bridge window [mem
> 0x000c0000-0x000dffff] (subtractive decode)
> <7>[    0.133512] pci 0000:00:14.4:   bridge window [mem
> 0x80000000-0xfebfffff] (subtractive decode)
> <7>[    0.133522] pci_bus 0000:00: on NUMA node 0
> <7>[    0.133525] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> <7>[    0.133673] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> <7>[    0.133740] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
> <7>[    0.133765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
> <6>[    0.133794]  pci0000:00: Requesting ACPI _OSC control (0x1d)
> <6>[    0.133830]  pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND),
> returned control mask: 0x1d
> <6>[    0.133869] ACPI _OSC control for PCIe not granted, disabling ASPM
> <6>[    0.146517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.147321] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.147709] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.148081] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.148469] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.148856] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.149257] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 *11)
> <6>[    0.149581] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11)
> *0, disabled.
> <6>[    0.150017] vgaarb: device added:
> PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none
> <6>[    0.150048] vgaarb: loaded
> <6>[    0.150081] vgaarb: bridge control possible 0000:01:05.0
> <5>[    0.150196] SCSI subsystem initialized
> <7>[    0.150196] libata version 3.00 loaded.
> <6>[    0.150196] usbcore: registered new interface driver usbfs
> <6>[    0.150196] usbcore: registered new interface driver hub
> <6>[    0.150196] usbcore: registered new device driver usb
> <6>[    0.151009] Advanced Linux Sound Architecture Driver Version 1.0.24.
> <6>[    0.151045] PCI: Using ACPI for IRQ routing
> <7>[    0.159993] PCI: pci_cache_line_size set to 64 bytes
> <7>[    0.160072] reserve RAM buffer: 000000000009f000 - 000000000009ffff
> <7>[    0.160075] reserve RAM buffer: 0000000077ee0000 - 0000000077ffffff
> <6>[    0.160095] Bluetooth: Core ver 2.16
> <6>[    0.160095] NET: Registered protocol family 31
> <6>[    0.160095] Bluetooth: HCI device and connection manager initialized
> <6>[    0.160095] Bluetooth: HCI socket layer initialized
> <6>[    0.160105] Bluetooth: L2CAP socket layer initialized
> <6>[    0.160144] Bluetooth: SCO socket layer initialized
> <6>[    0.160144] pnp: PnP ACPI init
> <6>[    0.160144] ACPI: bus type pnp registered
> <7>[    0.160199] pnp 00:00: [bus 00-ff]
> <7>[    0.160202] pnp 00:00: [io  0x0cf8-0x0cff]
> <7>[    0.160204] pnp 00:00: [io  0x0000-0x0cf7 window]
> <7>[    0.160207] pnp 00:00: [io  0x0d00-0xffff window]
> <7>[    0.160209] pnp 00:00: [mem 0x000a0000-0x000bffff window]
> <7>[    0.160211] pnp 00:00: [mem 0x000c0000-0x000dffff window]
> <7>[    0.160213] pnp 00:00: [mem 0x80000000-0xfebfffff window]
> <7>[    0.161015] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
> <7>[    0.161064] pnp 00:01: [io  0x4100-0x411f]
> <7>[    0.161066] pnp 00:01: [io  0x0228-0x022f]
> <7>[    0.161068] pnp 00:01: [io  0x040b]
> <7>[    0.161070] pnp 00:01: [io  0x04d6]
> <7>[    0.161072] pnp 00:01: [io  0x0c00-0x0c01]
> <7>[    0.161074] pnp 00:01: [io  0x0c14]
> <7>[    0.161076] pnp 00:01: [io  0x0c50-0x0c52]
> <7>[    0.161078] pnp 00:01: [io  0x0c6c-0x0c6d]
> <7>[    0.161079] pnp 00:01: [io  0x0c6f]
> <7>[    0.161081] pnp 00:01: [io  0x0cd0-0x0cd1]
> <7>[    0.161083] pnp 00:01: [io  0x0cd2-0x0cd3]
> <7>[    0.161087] pnp 00:01: [io  0x0cd4-0x0cdf]
> <7>[    0.161089] pnp 00:01: [io  0x4000-0x40fe]
> <7>[    0.161091] pnp 00:01: [io  0x4210-0x4217]
> <7>[    0.161093] pnp 00:01: [io  0x0b10-0x0b1f]
> <7>[    0.161095] pnp 00:01: [mem 0x00000000-0x00000fff window]
> <7>[    0.161097] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
> <4>[    0.161131] pnp 00:01: disabling [mem 0x00000000-0x00000fff
> window] because it overlaps 0000:02:00.0 BAR 6 [mem
> 0x00000000-0x0001ffff pref]
> <6>[    0.161198] system 00:01: [io  0x4100-0x411f] has been reserved
> <6>[    0.161198] system 00:01: [io  0x0228-0x022f] has been reserved
> <6>[    0.161198] system 00:01: [io  0x040b] has been reserved
> <6>[    0.161198] system 00:01: [io  0x04d6] has been reserved
> <6>[    0.163988] system 00:01: [io  0x0c00-0x0c01] has been reserved
> <6>[    0.164023] system 00:01: [io  0x0c14] has been reserved
> <6>[    0.164058] system 00:01: [io  0x0c50-0x0c52] has been reserved
> <6>[    0.164094] system 00:01: [io  0x0c6c-0x0c6d] has been reserved
> <6>[    0.164129] system 00:01: [io  0x0c6f] has been reserved
> <6>[    0.164164] system 00:01: [io  0x0cd0-0x0cd1] has been reserved
> <6>[    0.164199] system 00:01: [io  0x0cd2-0x0cd3] has been reserved
> <6>[    0.164235] system 00:01: [io  0x0cd4-0x0cdf] has been reserved
> <6>[    0.164270] system 00:01: [io  0x4000-0x40fe] has been reserved
> <6>[    0.164306] system 00:01: [io  0x4210-0x4217] has been reserved
> <6>[    0.164342] system 00:01: [io  0x0b10-0x0b1f] has been reserved
> <6>[    0.164378] system 00:01: [mem 0xfee00400-0xfee00fff window] has
> been reserved
> <7>[    0.164418] system 00:01: Plug and Play ACPI device, IDs PNP0c02
> (active)
> <7>[    0.164505] pnp 00:02: [dma 4]
> <7>[    0.164507] pnp 00:02: [io  0x0000-0x000f]
> <7>[    0.164509] pnp 00:02: [io  0x0080-0x0090]
> <7>[    0.164511] pnp 00:02: [io  0x0094-0x009f]
> <7>[    0.164513] pnp 00:02: [io  0x00c0-0x00df]
> <7>[    0.164538] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
> <7>[    0.164538] pnp 00:03: [io  0x0070-0x0073]
> <7>[    0.164538] pnp 00:03: [irq 8]
> <7>[    0.164538] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
> <7>[    0.164538] pnp 00:04: [io  0x0061]
> <7>[    0.164538] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
> <7>[    0.164538] pnp 00:05: [io  0x00f0-0x00ff]
> <7>[    0.164538] pnp 00:05: [irq 13]
> <7>[    0.164997] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
> <7>[    0.165014] pnp 00:06: [io  0x0010-0x001f]
> <7>[    0.165015] pnp 00:06: [io  0x0022-0x003f]
> <7>[    0.165017] pnp 00:06: [io  0x0044-0x005f]
> <7>[    0.165019] pnp 00:06: [io  0x0062-0x0063]
> <7>[    0.165021] pnp 00:06: [io  0x0065-0x006f]
> <7>[    0.165023] pnp 00:06: [io  0x0074-0x007f]
> <7>[    0.165025] pnp 00:06: [io  0x0091-0x0093]
> <7>[    0.165027] pnp 00:06: [io  0x00a2-0x00bf]
> <7>[    0.165029] pnp 00:06: [io  0x00e0-0x00ef]
> <7>[    0.165031] pnp 00:06: [io  0x04d0-0x04d1]
> <7>[    0.165033] pnp 00:06: [io  0x0220-0x0225]
> <6>[    0.165080] system 00:06: [io  0x04d0-0x04d1] has been reserved
> <6>[    0.165080] system 00:06: [io  0x0220-0x0225] has been reserved
> <7>[    0.165080] system 00:06: Plug and Play ACPI device, IDs PNP0c02
> (active)
> <7>[    0.165195] pnp 00:07: [io  0x03f0-0x03f5]
> <7>[    0.165197] pnp 00:07: [io  0x03f7]
> <7>[    0.165206] pnp 00:07: [irq 6]
> <7>[    0.165208] pnp 00:07: [dma 2]
> <7>[    0.165252] pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
> <7>[    0.165252] pnp 00:08: [io  0x03f8-0x03ff]
> <7>[    0.165252] pnp 00:08: [irq 4]
> <7>[    0.165252] pnp 00:08: Plug and Play ACPI device, IDs PNP0501 (active)
> <7>[    0.165252] pnp 00:09: [io  0x0378-0x037f]
> <7>[    0.165253] pnp 00:09: [irq 7]
> <7>[    0.165301] pnp 00:09: Plug and Play ACPI device, IDs PNP0400 (active)
> <7>[    0.166061] pnp 00:0a: [mem 0xe0000000-0xefffffff]
> <6>[    0.166105] system 00:0a: [mem 0xe0000000-0xefffffff] has been
> reserved
> <7>[    0.166105] system 00:0a: Plug and Play ACPI device, IDs PNP0c02
> (active)
> <7>[    0.166157] pnp 00:0b: [mem 0x000cd600-0x000cffff]
> <7>[    0.166159] pnp 00:0b: [mem 0x000f0000-0x000f7fff]
> <7>[    0.166161] pnp 00:0b: [mem 0x000f8000-0x000fbfff]
> <7>[    0.166163] pnp 00:0b: [mem 0x000fc000-0x000fffff]
> <7>[    0.166165] pnp 00:0b: [mem 0x77ef0000-0x77feffff]
> <7>[    0.166167] pnp 00:0b: [mem 0xfed00000-0xfed000ff]
> <7>[    0.166171] pnp 00:0b: [mem 0x77ee0000-0x77efffff]
> <7>[    0.166173] pnp 00:0b: [mem 0xffff0000-0xffffffff]
> <7>[    0.166175] pnp 00:0b: [mem 0x00000000-0x0009ffff]
> <7>[    0.166177] pnp 00:0b: [mem 0x00100000-0x77edffff]
> <7>[    0.166180] pnp 00:0b: [mem 0x77ff0000-0x7ffeffff]
> <7>[    0.166182] pnp 00:0b: [mem 0xfec00000-0xfec00fff]
> <7>[    0.166184] pnp 00:0b: [mem 0xfee00000-0xfee00fff]
> <7>[    0.166186] pnp 00:0b: [mem 0xfff80000-0xfffeffff]
> <6>[    0.166237] system 00:0b: [mem 0x000cd600-0x000cffff] has been
> reserved
> <6>[    0.166237] system 00:0b: [mem 0x000f0000-0x000f7fff] could not be
> reserved
> <6>[    0.166237] system 00:0b: [mem 0x000f8000-0x000fbfff] could not be
> reserved
> <6>[    0.166237] system 00:0b: [mem 0x000fc000-0x000fffff] could not be
> reserved
> <6>[    0.166237] system 00:0b: [mem 0x77ef0000-0x77feffff] could not be
> reserved
> <6>[    0.166237] system 00:0b: [mem 0xfed00000-0xfed000ff] has been
> reserved
> <6>[    0.166237] system 00:0b: [mem 0x77ee0000-0x77efffff] could not be
> reserved
> <6>[    0.166251] system 00:0b: [mem 0xffff0000-0xffffffff] has been
> reserved
> <6>[    0.166288] system 00:0b: [mem 0x00000000-0x0009ffff] could not be
> reserved
> <6>[    0.166324] system 00:0b: [mem 0x00100000-0x77edffff] could not be
> reserved
> <6>[    0.166360] system 00:0b: [mem 0x77ff0000-0x7ffeffff] could not be
> reserved
> <6>[    0.166396] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be
> reserved
> <6>[    0.166432] system 00:0b: [mem 0xfee00000-0xfee00fff] could not be
> reserved
> <6>[    0.166468] system 00:0b: [mem 0xfff80000-0xfffeffff] has been
> reserved
> <7>[    0.166504] system 00:0b: Plug and Play ACPI device, IDs PNP0c01
> (active)
> <6>[    0.166511] pnp: PnP ACPI: found 12 devices
> <6>[    0.166545] ACPI: ACPI bus type pnp unregistered
> <6>[    0.174647] Switching to clocksource acpi_pm
> <7>[    0.174723] PCI: max bus depth: 1 pci_try_num: 2
> <6>[    0.174741] pci 0000:00:01.0: PCI bridge to [bus 01-01]
> <6>[    0.174777] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
> <6>[    0.174814] pci 0000:00:01.0:   bridge window [mem
> 0xfda00000-0xfdbfffff]
> <6>[    0.174850] pci 0000:00:01.0:   bridge window [mem
> 0xf0000000-0xf7ffffff 64bit pref]
> <6>[    0.174894] pci 0000:02:00.0: BAR 6: assigned [mem
> 0xfdc00000-0xfdc1ffff pref]
> <6>[    0.174933] pci 0000:00:07.0: PCI bridge to [bus 02-02]
> <6>[    0.174690] Switched to NOHz mode on CPU #0
> <6>[    0.174933] Switched to NOHz mode on CPU #1
> <6>[    0.174933] pci 0000:00:07.0:   bridge window [io  0xe000-0xefff]
> <6>[    0.174933] pci 0000:00:07.0:   bridge window [mem
> 0xfdf00000-0xfdffffff]
> <6>[    0.174933] pci 0000:00:07.0:   bridge window [mem
> 0xfdc00000-0xfdcfffff 64bit pref]
> <6>[    0.174933] pci 0000:00:14.4: PCI bridge to [bus 03-03]
> <6>[    0.174933] pci 0000:00:14.4:   bridge window [io  0xc000-0xcfff]
> <6>[    0.174933] pci 0000:00:14.4:   bridge window [mem
> 0xfde00000-0xfdefffff]
> <6>[    0.174933] pci 0000:00:14.4:   bridge window [mem
> 0xfdd00000-0xfddfffff pref]
> <7>[    0.174933] pci 0000:00:07.0: setting latency timer to 64
> <7>[    0.174933] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
> <7>[    0.174933] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
> <7>[    0.174933] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
> <7>[    0.174933] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
> <7>[    0.174933] pci_bus 0000:00: resource 8 [mem 0x80000000-0xfebfffff]
> <7>[    0.174933] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
> <7>[    0.174933] pci_bus 0000:01: resource 1 [mem 0xfda00000-0xfdbfffff]
> <7>[    0.174933] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff
> 64bit pref]
> <7>[    0.174933] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
> <7>[    0.174933] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
> <7>[    0.174933] pci_bus 0000:02: resource 2 [mem 0xfdc00000-0xfdcfffff
> 64bit pref]
> <7>[    0.174933] pci_bus 0000:03: resource 0 [io  0xc000-0xcfff]
> <7>[    0.174933] pci_bus 0000:03: resource 1 [mem 0xfde00000-0xfdefffff]
> <7>[    0.174933] pci_bus 0000:03: resource 2 [mem 0xfdd00000-0xfddfffff
> pref]
> <7>[    0.174933] pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7]
> <7>[    0.174933] pci_bus 0000:03: resource 5 [io  0x0d00-0xffff]
> <7>[    0.174933] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
> <7>[    0.174933] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
> <7>[    0.174933] pci_bus 0000:03: resource 8 [mem 0x80000000-0xfebfffff]
> <6>[    0.174933] NET: Registered protocol family 2
> <6>[    0.174933] IP route cache hash table entries: 65536 (order: 7,
> 524288 bytes)
> <6>[    0.175314] TCP established hash table entries: 262144 (order: 10,
> 4194304 bytes)
> <6>[    0.177783] TCP bind hash table entries: 65536 (order: 8, 1048576
> bytes)
> <6>[    0.178410] TCP: Hash tables configured (established 262144 bind
> 65536)
> <6>[    0.178446] TCP reno registered
> <6>[    0.178482] UDP hash table entries: 1024 (order: 3, 32768 bytes)
> <6>[    0.178534] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
> <6>[    0.178723] NET: Registered protocol family 1
> <6>[    0.178863] RPC: Registered named UNIX socket transport module.
> <6>[    0.178900] RPC: Registered udp transport module.
> <6>[    0.178934] RPC: Registered tcp transport module.
> <6>[    0.178969] RPC: Registered tcp NFSv4.1 backchannel transport module.
> <7>[    0.385043] pci 0000:01:05.0: Boot video device
> <7>[    0.385055] PCI: CLS 32 bytes, default 64
> <6>[    0.386163] audit: initializing netlink socket (disabled)
> <5>[    0.386207] type=2000 audit(1316374513.386:1): initialized
> <6>[    0.393104] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
> <6>[    0.393446] msgmni has been set to 3501
> <6>[    0.393892] Block layer SCSI generic (bsg) driver version 0.4
> loaded (major 253)
> <6>[    0.393933] io scheduler noop registered
> <6>[    0.393986] io scheduler cfq registered (default)
> <7>[    0.394179] pcieport 0000:00:07.0: setting latency timer to 64
> <7>[    0.394205] pcieport 0000:00:07.0: irq 40 for MSI/MSI-X
> <6>[    0.394864] input: Power Button as
> /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
> <6>[    0.394909] ACPI: Power Button [PWRB]
> <6>[    0.395047] input: Power Button as
> /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
> <6>[    0.395087] ACPI: Power Button [PWRF]
> <6>[    0.395230] ACPI: Fan [FAN] (on)
> <7>[    0.395360] ACPI: acpi_idle registered with cpuidle
> <4>[    0.396661] ACPI Warning: For \_TZ_.THRM._PSL: Return Package has
> no elements (empty) (20110413/nspredef-456)
> <3>[    0.396763] ACPI: [Package] has zero elements (ffff8800742f1f40)
> <4>[    0.396798] ACPI: Invalid passive threshold
> <6>[    0.396978] thermal LNXTHERM:00: registered as thermal_zone0
> <6>[    0.397047] ACPI: Thermal Zone [THRM] (40 C)
> <6>[    0.397129] ERST: Table is not found!
> <6>[    0.397250] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
> <6>[    0.417954] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> <6>[    0.496800] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> <6>[    0.508337] [drm] Initialized drm 1.1.0 20060810
> <6>[    0.508423] [drm] radeon defaulting to kernel modesetting.
> <6>[    0.508459] [drm] radeon kernel modesetting enabled.
> <6>[    0.508545] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low)
> -> IRQ 18
> <6>[    0.508762] [drm] initializing kernel modesetting (RS690
> 0x1002:0x791E 0x1043:0x826D).
> <6>[    0.508817] [drm] register mmio base: 0xFDBE0000
> <6>[    0.508852] [drm] register mmio size: 65536
> <6>[    0.510386] ATOM BIOS: ATI
> <6>[    0.510436] radeon 0000:01:05.0: VRAM: 128M 0x0000000078000000 -
> 0x000000007FFFFFFF (128M used)
> <6>[    0.510476] radeon 0000:01:05.0: GTT: 512M 0x0000000080000000 -
> 0x000000009FFFFFFF
> <6>[    0.510516] [drm] Supports vblank timestamp caching Rev 1
> (10.10.2010).
> <6>[    0.510552] [drm] Driver supports precise vblank timestamp query.
> <6>[    0.510611] [drm] radeon: irq initialized.
> <6>[    0.511162] [drm] Detected VRAM RAM=128M, BAR=128M
> <6>[    0.511202] [drm] RAM width 128bits DDR
> <6>[    0.511317] [TTM] Zone  kernel: Available graphics memory: 896440 kiB.
> <6>[    0.511356] [TTM] Initializing pool allocator.
> <6>[    0.511416] [drm] radeon: 128M of VRAM memory ready
> <6>[    0.511451] [drm] radeon: 512M of GTT memory ready.
> <6>[    0.511487] [drm] GART: num cpu pages 131072, num gpu pages 131072
> <6>[    0.515340] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
> <6>[    0.521223] radeon 0000:01:05.0: WB enabled
> <6>[    0.521358] [drm] Loading RS690/RS740 Microcode
> <6>[    0.521544] [drm] radeon: ring at 0x0000000080001000
> <6>[    0.521595] [drm] ring test succeeded in 1 usecs
> <6>[    0.521725] [drm] radeon: ib pool ready.
> <6>[    0.521771] [drm] ib test succeeded in 0 usecs
> <7>[    0.521809] failed to evaluate ATIF got AE_BAD_PARAMETER
> <6>[    0.522489] [drm] Radeon Display Connectors
> <6>[    0.522524] [drm] Connector 0:
> <6>[    0.522557] [drm]   VGA
> <6>[    0.522591] [drm]   DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48
> 0x7e5c 0x7e4c
> <6>[    0.522629] [drm]   Encoders:
> <6>[    0.522662] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
> <6>[    0.522696] [drm] Connector 1:
> <6>[    0.522729] [drm]   S-video
> <6>[    0.522762] [drm]   Encoders:
> <6>[    0.522795] [drm]     TV1: INTERNAL_KLDSCP_DAC1
> <6>[    0.522829] [drm] Connector 2:
> <6>[    0.522862] [drm]   HDMI-A
> <6>[    0.522895] [drm]   HPD2
> <6>[    0.522929] [drm]   DDC: 0x7e40 0x7e60 0x7e44 0x7e64 0x7e48 0x7e68
> 0x7e4c 0x7e6c
> <6>[    0.522967] [drm]   Encoders:
> <6>[    0.523016] [drm]     DFP2: INTERNAL_DDI
> <6>[    0.523049] [drm] Connector 3:
> <6>[    0.523082] [drm]   DVI-D
> <6>[    0.523116] [drm]   DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58
> 0x7e4c 0x7e5c
> <6>[    0.523154] [drm]   Encoders:
> <6>[    0.523187] [drm]     DFP3: INTERNAL_LVTM1
> <6>[    0.574522] [drm] Radeon display connector VGA-1: Found valid EDID
> <6>[    0.675501] [drm] Radeon display connector HDMI-A-1: Found valid EDID
> <6>[    0.685115] [drm] Radeon display connector DVI-D-1: No monitor
> connected or invalid EDID
> <6>[    0.933839] [drm] fb mappable at 0xF0040000
> <6>[    0.933905] [drm] vram apper at 0xF0000000
> <6>[    0.933938] [drm] size 8294400
> <6>[    0.933972] [drm] fb depth is 24
> <6>[    0.934014] [drm]    pitch is 7680
> <6>[    0.934131] fbcon: radeondrmfb (fb0) is primary device
> <6>[    0.962975] Console: switching to colour frame buffer device 240x67
> <6>[    0.972371] fb0: radeondrmfb frame buffer device
> <6>[    0.972410] drm: registered panic notifier
> <6>[    0.972440] [drm] Initialized radeon 2.10.0 20080528 for
> 0000:01:05.0 on minor 0
> <6>[    0.974922] brd: module loaded
> <6>[    0.976129] loop: module loaded
> <6>[    0.976212] Uniform Multi-Platform E-IDE driver
> <6>[    0.976392] ide-gd driver 1.18
> <7>[    0.976659] ahci 0000:00:12.0: version 3.0
> <6>[    0.976682] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> <4>[    0.976746] ahci 0000:00:12.0: ASUS M2A-VM: enabling 64bit DMA
> <6>[    0.976894] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3
> Gbps 0xf impl SATA mode
> <6>[    0.976948] ahci 0000:00:12.0: flags: 64bit ncq sntf ilck pm led
> clo pmp pio slum part ccc
> <6>[    0.978388] scsi0 : ahci
> <6>[    0.978657] scsi1 : ahci
> <6>[    0.978850] scsi2 : ahci
> <6>[    0.979043] scsi3 : ahci
> <6>[    0.979251] ata1: SATA max UDMA/133 abar m1024@0xfe02f000 port
> 0xfe02f100 irq 22
> <6>[    0.979311] ata2: SATA max UDMA/133 abar m1024@0xfe02f000 port
> 0xfe02f180 irq 22
> <6>[    0.979371] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port
> 0xfe02f200 irq 22
> <6>[    0.979430] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port
> 0xfe02f280 irq 22
> <6>[    0.979764] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
> <6>[    0.979841] r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low)
> -> IRQ 19
> <7>[    0.979922] r8169 0000:02:00.0: setting latency timer to 64
> <7>[    0.979974] r8169 0000:02:00.0: irq 41 for MSI/MSI-X
> <6>[    0.980235] r8169 0000:02:00.0: eth0: RTL8168b/8111b at
> 0xffffc9000000c000, 00:1b:fc:89:fa:a2, XID 18000000 IRQ 41
> <6>[    0.980386] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
> <6>[    0.980467] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level,
> low) -> IRQ 19
> <6>[    0.980535] ehci_hcd 0000:00:13.5: EHCI Host Controller
> <6>[    0.980580] ehci_hcd 0000:00:13.5: new USB bus registered,
> assigned bus number 1
> <6>[    0.980660] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB
> freeze workaround
> <6>[    0.980729] ehci_hcd 0000:00:13.5: debug port 1
> <6>[    0.980795] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
> <6>[    0.986023] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
> <6>[    0.986250] hub 1-0:1.0: USB hub found
> <6>[    0.986283] hub 1-0:1.0: 10 ports detected
> <6>[    0.986444] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
> <6>[    0.986509] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[    0.986569] ohci_hcd 0000:00:13.0: OHCI Host Controller
> <6>[    0.986610] ohci_hcd 0000:00:13.0: new USB bus registered,
> assigned bus number 2
> <6>[    0.986695] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
> <6>[    1.041189] hub 2-0:1.0: USB hub found
> <6>[    1.041222] hub 2-0:1.0: 2 ports detected
> <6>[    1.041307] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[    1.041366] ohci_hcd 0000:00:13.1: OHCI Host Controller
> <6>[    1.041408] ohci_hcd 0000:00:13.1: new USB bus registered,
> assigned bus number 3
> <6>[    1.043218] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
> <6>[    1.099184] hub 3-0:1.0: USB hub found
> <6>[    1.100980] hub 3-0:1.0: 2 ports detected
> <6>[    1.102820] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[    1.104652] ohci_hcd 0000:00:13.2: OHCI Host Controller
> <6>[    1.106404] ohci_hcd 0000:00:13.2: new USB bus registered,
> assigned bus number 4
> <6>[    1.108236] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
> <6>[    1.165198] hub 4-0:1.0: USB hub found
> <6>[    1.167032] hub 4-0:1.0: 2 ports detected
> <6>[    1.168884] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[    1.170721] ohci_hcd 0000:00:13.3: OHCI Host Controller
> <6>[    1.172563] ohci_hcd 0000:00:13.3: new USB bus registered,
> assigned bus number 5
> <6>[    1.174331] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
> <6>[    1.231189] hub 5-0:1.0: USB hub found
> <6>[    1.232980] hub 5-0:1.0: 2 ports detected
> <6>[    1.234800] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[    1.236628] ohci_hcd 0000:00:13.4: OHCI Host Controller
> <6>[    1.238457] ohci_hcd 0000:00:13.4: new USB bus registered,
> assigned bus number 6
> <6>[    1.240300] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
> <6>[    1.297187] hub 6-0:1.0: USB hub found
> <6>[    1.298966] hub 6-0:1.0: 2 ports detected
> <6>[    1.301069] i8042: PNP: No PS/2 controller found. Probing ports
> directly.
> <6>[    1.303316] serio: i8042 KBD port at 0x60,0x64 irq 1
> <6>[    1.305153] serio: i8042 AUX port at 0x60,0x64 irq 12
> <6>[    1.307032] mousedev: PS/2 mouse device common for all mice
> <4>[    1.309117] k8temp 0000:00:18.3: Temperature readouts might be
> wrong - check erratum #141
> <6>[    1.310999] md: linear personality registered for level -1
> <6>[    1.312854] device-mapper: uevent: version 1.0.3
> <6>[    1.314739] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02)
> initialised: dm-devel@xxxxxxxxxx
> <6>[    1.316569] Bluetooth: Generic Bluetooth USB driver ver 0.6
> <6>[    1.318439] usbcore: registered new interface driver btusb
> <6>[    1.320251] cpuidle: using governor ladder
> <6>[    1.322080] cpuidle: using governor menu
> <6>[    1.324308] ALSA device list:
> <6>[    1.326177]   No soundcards found.
> <6>[    1.327923] TCP cubic registered
> <6>[    1.329757] NET: Registered protocol family 17
> <6>[    1.331657] Bluetooth: RFCOMM TTY layer initialized
> <6>[    1.333581] Bluetooth: RFCOMM socket layer initialized
> <6>[    1.335458] Bluetooth: RFCOMM ver 1.11
> <6>[    1.337296] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
> <6>[    1.339102] Bluetooth: BNEP filters: protocol multicast
> <6>[    1.340805] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
> <3>[    1.439021] ata2: softreset failed (device not ready)
> <4>[    1.440767] ata2: applying SB600 PMP SRST workaround and retrying
> <3>[    1.442560] ata4: softreset failed (device not ready)
> <4>[    1.444252] ata4: applying SB600 PMP SRST workaround and retrying
> <3>[    1.446052] ata1: softreset failed (device not ready)
> <4>[    1.447873] ata1: applying SB600 PMP SRST workaround and retrying
> <3>[    1.449704] ata3: softreset failed (device not ready)
> <4>[    1.451614] ata3: applying SB600 PMP SRST workaround and retrying
> <6>[    1.570017] usb 3-2: new full speed USB device number 2 using ohci_hcd
> <6>[    1.606033] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[    1.607842] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[    1.609683] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> <6>[    1.611455] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[    1.613286] ata4.00: ATAPI: TSSTcorp CDDVDW SH-S203P, SB00, max
> UDMA/100
> <6>[    1.615096] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.617016] ata2.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max
> UDMA/133
> <6>[    1.618805] ata2.00: 2930277168 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> <6>[    1.620598] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.622392] ata1.00: ATA-8: SAMSUNG HD501LJ, CR100-11, max UDMA7
> <6>[    1.624159] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> <6>[    1.625979] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.628308] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.630140] ata4.00: configured for UDMA/100
> <6>[    1.632082] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.633901] ata1.00: configured for UDMA/133
> <6>[    1.635707] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.637549] ata2.00: configured for UDMA/133
> <6>[    1.644223] ata3.00: ATA-8: WDC WD3200BEVT-00ZCT0, 11.01A11, max
> UDMA/133
> <6>[    1.646082] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth
> 31/32), AA
> <5>[    1.646224] scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG
> HD501LJ  CR10 PQ: 0 ANSI: 5
> <6>[    1.649806] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <5>[    1.651903] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks:
> (500 GB/465 GiB)
> <6>[    1.652618] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[    1.652620] ata3.00: configured for UDMA/133
> <5>[    1.657496] sd 0:0:0:0: [sda] Write Protect is off
> <5>[    1.657524] scsi 1:0:0:0: Direct-Access     ATA      WDC
> WD15EADS-00P 01.0 PQ: 0 ANSI: 5
> <7>[    1.661219] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> <5>[    1.661238] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> <5>[    1.661388] sd 1:0:0:0: [sdb] 2930277168 512-byte logical blocks:
> (1.50 TB/1.36 TiB)
> <5>[    1.661419] sd 1:0:0:0: [sdb] Write Protect is off
> <7>[    1.661422] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> <5>[    1.661436] sd 1:0:0:0: [sdb] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> <5>[    1.669349] scsi 2:0:0:0: Direct-Access     ATA      WDC
> WD3200BEVT-0 11.0 PQ: 0 ANSI: 5
> <5>[    1.671527] sd 2:0:0:0: [sdc] 625142448 512-byte logical blocks:
> (320 GB/298 GiB)
> <5>[    1.673606] sd 2:0:0:0: [sdc] Write Protect is off
> <5>[    1.673828] scsi 3:0:0:0: CD-ROM            TSSTcorp CDDVDW
> SH-S203P  SB00 PQ: 0 ANSI: 5
> <4>[    1.676196] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
> xa/form2 cdda tray
> <6>[    1.676198] cdrom: Uniform CD-ROM driver Revision: 3.20
> <7>[    1.676313] sr 3:0:0:0: Attached scsi CD-ROM sr0
> <6>[    1.679780]  sda: sda1 sda2 sda3 sda4
> <6>[    1.683344]  sdb: sdb1 sdb2 sdb3 sdb4
> <5>[    1.683535] sd 0:0:0:0: [sda] Attached SCSI disk
> <7>[    1.683545] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> <5>[    1.683561] sd 2:0:0:0: [sdc] Write cache: enabled, read cache:
> enabled, doesn't support DPO or FUA
> <5>[    1.689674] sd 1:0:0:0: [sdb] Attached SCSI disk
> <6>[    1.748675]  sdc: sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 sdc7 sdc8 >
> <5>[    1.751473] sd 2:0:0:0: [sdc] Attached SCSI disk
> <3>[    1.753929] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
> <6>[    1.756034] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core
> Processor 5600+ (2 cpu cores) (version 2.20.00)
> <6>[    1.758126] powernow-k8: fid 0x14 (2800 MHz), vid 0x8
> <6>[    1.760103] powernow-k8: fid 0x12 (2600 MHz), vid 0xa
> <6>[    1.762173] powernow-k8: fid 0x10 (2400 MHz), vid 0xc
> <6>[    1.764224] powernow-k8: fid 0xe (2200 MHz), vid 0xe
> <6>[    1.766280] powernow-k8: fid 0xc (2000 MHz), vid 0x10
> <6>[    1.768317] powernow-k8: fid 0xa (1800 MHz), vid 0x10
> <6>[    1.770357] powernow-k8: fid 0x2 (1000 MHz), vid 0x12
> <6>[    1.772504] md: Skipping autodetection of RAID arrays.
> (raid=autodetect will force)
> <6>[    1.794375] EXT3-fs (sda3): recovery required on readonly filesystem
> <6>[    1.796428] EXT3-fs (sda3): write access will be enabled during
> recovery
> <6>[    1.805899] EXT3-fs: barriers not enabled
> <6>[    1.824514] kjournald starting.  Commit interval 5 seconds
> <6>[    1.824595] EXT3-fs (sda3): recovery complete
> <6>[    1.835108] EXT3-fs (sda3): mounted filesystem with writeback data
> mode
> <6>[    1.840311] VFS: Mounted root (ext3 filesystem) readonly on device
> 8:3.
> <6>[    1.845604] Freeing unused kernel memory: 464k freed
> <6>[    1.868037] usb 5-1: new low speed USB device number 2 using ohci_hcd
> <6>[    6.958459] udev[1059]: starting version 164
> <6>[    7.174260] atiixp 0000:00:14.1: IDE controller (0x1002:0x438c rev
> 0x00)
> <6>[    7.174277] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[    7.174295] atiixp 0000:00:14.1: not 100% native mode: will probe
> irqs later
> <6>[    7.174303]     ide0: BM-DMA at 0xf900-0xf907
> <7>[    7.174310] Probing IDE interface ide0...
> <6>[    7.323529] input: PC Speaker as /devices/platform/pcspkr/input/input2
> <6>[    7.427754] rtc_cmos 00:03: RTC can wake from S4
> <6>[    7.427992] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
> <6>[    7.428080] rtc0: alarms up to one month, 242 bytes nvram
> <6>[    7.462953] Linux video capture interface: v2.00
> <5>[    7.540836] sd 0:0:0:0: Attached scsi generic sg0 type 0
> <5>[    7.540922] sd 1:0:0:0: Attached scsi generic sg1 type 0
> <5>[    7.541000] sd 2:0:0:0: Attached scsi generic sg2 type 0
> <5>[    7.541097] sr 3:0:0:0: Attached scsi generic sg3 type 5
> <6>[    7.687199] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> <6>[    7.687388] piix4_smbus 0000:00:14.0: SMBus Host Controller at
> 0xb00, revision 0
> <6>[    7.764840] input: iMON Panel, Knob and Mouse(15c2:ffdc) as
> /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/input/input3
> <6>[    7.772293] IR NEC protocol handler initialized
> <6>[    7.785025] imon 5-1:1.0: 0xffdc iMON VFD, MCE IR (id 0x9e)
> <6>[    7.843023] Registered IR keymap rc-imon-mce
> <6>[    7.843293] input: iMON Remote (15c2:ffdc) as
> /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0/input4
> <6>[    7.843388] rc0: iMON Remote (15c2:ffdc) as
> /devices/pci0000:00/0000:00:13.3/usb5/5-1/5-1:1.0/rc/rc0
> <6>[    7.857208] imon 5-1:1.0: iMON device (15c2:ffdc, intf0) on
> usb<5:2> initialized
> <6>[    7.857254] usbcore: registered new interface driver imon
> <6>[    7.911900] saa7130/34: v4l2 driver version 0.2.16 loaded
> <6>[    7.912064] saa7134 0000:03:06.0: PCI INT A -> GSI 21 (level, low)
> -> IRQ 21
> <6>[    7.912078] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 21,
> latency: 64, mmio: 0xfdeff000
> <6>[    7.912094] saa7133[0]: subsystem: 11bd:002f, board: Pinnacle PCTV
> 310i [card=101,autodetected]
> <6>[    7.912145] saa7133[0]: board init: gpio is 600e000
> <6>[    7.931260] IT8716 SuperIO detected.
> <6>[    7.932094] parport_pc 00:09: reported by Plug and Play ACPI
> <6>[    7.932134] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
> <4>[    8.015378] saa7133[0]: i2c eeprom read error (err=-5)
> <6>[    8.129842] IR RC5(x) protocol handler initialized
> <6>[    8.180277] IR RC6 protocol handler initialized
> <4>[    8.180688] i2c-core: driver [tuner] using legacy suspend method
> <4>[    8.180697] i2c-core: driver [tuner] using legacy resume method
> <6>[    8.302205] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[    8.454573] IR JVC protocol handler initialized
> <6>[    8.486162] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level,
> low) -> IRQ 19
> <7>[    8.486241] HDA Intel 0000:01:05.2: irq 42 for MSI/MSI-X
> <6>[    8.490533] IR Sony protocol handler initialized
> <6>[    8.514675] lirc_dev: IR Remote Control driver registered, major 252
> <6>[    8.523937] IR LIRC bridge handler initialized
> <6>[    8.551033] tuner 5-004b: Tuner -1 found with type(s) Radio TV.
> <6>[    8.586028] tda829x 5-004b: setting tuner address to 61
> <6>[    8.627490] tda829x 5-004b: ANDERS: setting switch_addr. was 0x00,
> new 0x4b
> <6>[    8.627499] tda829x 5-004b: ANDERS: new 0x61
> <6>[    8.633026] tda829x 5-004b: type set to tda8290+75a
> <4>[   11.493010] hda-intel: azx_get_response timeout, switching to
> polling mode: last cmd=0x000f0000
> <6>[   11.623087] saa7133[0]: registered device video0 [v4l2]
> <6>[   11.623130] saa7133[0]: registered device vbi0
> <6>[   11.623168] saa7133[0]: registered device radio0
> <6>[   11.644660] dvb_init() allocating 1 frontend
> <6>[   11.690027] DVB: registering new adapter (saa7133[0])
> <4>[   11.690032] DVB: registering adapter 0 frontend 0 (Philips
> TDA10046H DVB-T)...
> <6>[   11.756020] tda1004x: setting up plls for 48MHz sampling clock
> <4>[   12.494013] hda-intel: No response from codec, disabling MSI: last
> cmd=0x000f0000
> <4>[   13.495013] hda-intel: Codec #0 probe error; disabling it...
> <3>[   13.909022] tda1004x: timeout waiting for DSP ready
> <6>[   13.919019] tda1004x: found firmware revision 0 -- invalid
> <6>[   13.919022] tda1004x: trying to boot from eeprom
> <3>[   15.606012] hda_intel: azx_get_response timeout, switching to
> single_cmd mode: last cmd=0x00070503
> <3>[   15.607796] hda-codec: No codec parser is available
> <6>[   15.877023] tda1004x: found firmware revision 0 -- invalid
> <6>[   15.877031] tda1004x: waiting for firmware upload...
> <3>[   15.953447] tda1004x: no firmware upload (timeout or file not found?)
> <4>[   15.953453] tda1004x: firmware upload failed
> <6>[   16.078174] saa7134 ALSA driver for DMA sound loaded
> <6>[   16.078229] saa7133[0]/alsa: saa7133[0] at 0xfdeff000 irq 21
> registered as card -1
> <6>[   41.755581] EXT3-fs (sda3): using internal journal
> <6>[   41.937882] EXT3-fs: barriers not enabled
> <6>[   41.940227] kjournald starting.  Commit interval 5 seconds
> <6>[   41.940590] EXT3-fs (sda1): using internal journal
> <6>[   41.940602] EXT3-fs (sda1): mounted filesystem with writeback data
> mode
> <6>[   41.962540] EXT3-fs: barriers not enabled
> <6>[   41.975332] kjournald starting.  Commit interval 5 seconds
> <6>[   41.975652] EXT3-fs (dm-1): using internal journal
> <6>[   41.975660] EXT3-fs (dm-1): mounted filesystem with writeback data
> mode
> <6>[   42.063644] EXT3-fs: barriers not enabled
> <6>[   42.072233] kjournald starting.  Commit interval 5 seconds
> <6>[   42.072551] EXT3-fs (dm-2): using internal journal
> <6>[   42.072560] EXT3-fs (dm-2): mounted filesystem with writeback data
> mode
> <6>[   42.085164] EXT3-fs: barriers not enabled
> <6>[   42.096892] kjournald starting.  Commit interval 5 seconds
> <6>[   42.097760] EXT3-fs (dm-3): using internal journal
> <6>[   42.097770] EXT3-fs (dm-3): mounted filesystem with writeback data
> mode
> <6>[   42.169929] EXT4-fs (dm-4): mounted filesystem with ordered data
> mode. Opts: (null)
> <6>[   42.328528] EXT4-fs (dm-7): mounted filesystem with ordered data
> mode. Opts: (null)
> <6>[   42.373537] EXT3-fs: barriers not enabled
> <6>[   42.384316] kjournald starting.  Commit interval 5 seconds
> <6>[   42.384600] EXT3-fs (dm-5): using internal journal
> <6>[   42.384609] EXT3-fs (dm-5): mounted filesystem with writeback data
> mode
> <6>[   42.445883] EXT4-fs (dm-6): mounted filesystem with ordered data
> mode. Opts: (null)
> <6>[   42.502352] EXT4-fs (dm-0): mounted filesystem without journal.
> Opts: (null)
> <6>[   45.270924] Adding 10490440k swap on /dev/sda2.  Priority:-1
> extents:1 across:10490440k
> <6>[   45.769865] r8169 0000:02:00.0: eth0: link down
> <6>[   47.667834] r8169 0000:02:00.0: eth0: link up
> <6>[  203.678895] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  203.680952] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  203.680962] ata1.00: configured for UDMA/133
> <6>[  203.680970] ata1: EH complete
> <6>[  203.913278] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  203.917159] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  203.917168] ata2.00: configured for UDMA/133
> <6>[  203.917175] ata2: EH complete
> <6>[  204.328701] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  204.329712] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  204.329719] ata3.00: configured for UDMA/133
> <6>[  204.329727] ata3: EH complete
> <6>[  204.523207] EXT4-fs (dm-4): re-mounted. Opts: commit=0
> <6>[  204.530096] EXT4-fs (dm-7): re-mounted. Opts: commit=0
> <6>[  204.545240] EXT4-fs (dm-6): re-mounted. Opts: commit=0
> <6>[  204.552795] EXT4-fs (dm-0): re-mounted. Opts: commit=0
> <6>[  205.178334] PM: Syncing filesystems ... done.
> <4>[  205.258426] Freezing user space processes ... (elapsed 0.01
> seconds) done.
> <4>[  205.269022] Freezing remaining freezable tasks ... (elapsed 0.01
> seconds) done.
> <4>[  205.280037] Suspending console(s) (use no_console_suspend to debug)
> <5>[  205.280470] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
> <5>[  205.280510] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
> <5>[  205.280590] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> <5>[  205.280656] sd 1:0:0:0: [sdb] Stopping disk
> <5>[  205.280661] sd 2:0:0:0: [sdc] Stopping disk
> <6>[  205.280816] parport_pc 00:09: disabled
> <6>[  205.280883] serial 00:08: disabled
> <6>[  205.280909] serial 00:08: wake-up capability disabled by ACPI
> <7>[  205.281312] ACPI handle has no context!
> <6>[  205.281480] r8169 0000:02:00.0: eth0: link down
> <6>[  205.283177] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled
> <6>[  205.283212] ehci_hcd 0000:00:13.5: PCI INT D disabled
> <6>[  205.283223] ohci_hcd 0000:00:13.4: PCI INT C disabled
> <6>[  205.283254] ohci_hcd 0000:00:13.2: PCI INT C disabled
> <6>[  205.283283] ohci_hcd 0000:00:13.0: PCI INT A disabled
> <6>[  205.291041] ohci_hcd 0000:00:13.3: PCI INT B disabled
> <6>[  205.293036] ohci_hcd 0000:00:13.1: PCI INT B disabled
> <5>[  205.309953] sd 0:0:0:0: [sda] Stopping disk
> <6>[  205.316796] radeon 0000:01:05.0: PCI INT A disabled
> <6>[  205.382024] HDA Intel 0000:01:05.2: PCI INT B disabled
> <7>[  205.382034] ACPI handle has no context!
> <6>[  205.384100] HDA Intel 0000:00:14.2: PCI INT A disabled
> <6>[  205.974363] ahci 0000:00:12.0: PCI INT A disabled
> <6>[  205.974389] PM: suspend of devices complete after 694.074 msecs
> <7>[  205.974615] r8169 0000:02:00.0: PME# enabled
> <6>[  205.974624] pcieport 0000:00:07.0: wake-up capability enabled by ACPI
> <6>[  205.996148] PM: late suspend of devices complete after 21.754 msecs
> <6>[  205.996347] ACPI: Preparing to enter system sleep state S3
> <6>[  205.996427] PM: Saving platform NVS memory
> <4>[  205.996457] Disabling non-boot CPUs ...
> <6>[  205.997834] CPU 1 is now offline
> <6>[  205.998251] ACPI: Low-level resume complete
> <6>[  205.998251] PM: Restoring platform NVS memory
> <6>[  205.998251] Enabling non-boot CPUs ...
> <6>[  206.000486] Booting Node 0 Processor 1 APIC 0x1
> <7>[  206.000488] smpboot cpu 1: start_ip = 9a000
> <6>[  206.071328] CPU1 is up
> <6>[  206.071556] ACPI: Waking up from system sleep state S3
> <7>[  206.071680] pci 0000:00:00.0: restoring config space at offset 0x3
> (was 0x0, writing 0x4000)
> <7>[  206.071703] pcieport 0000:00:07.0: restoring config space at
> offset 0x1 (was 0x100007, writing 0x100407)
> <7>[  206.071738] ahci 0000:00:12.0: restoring config space at offset
> 0x2 (was 0x1018f00, writing 0x1060100)
> <6>[  206.071755] ahci 0000:00:12.0: set SATA to AHCI mode
> <7>[  206.071777] ohci_hcd 0000:00:13.0: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[  206.071803] ohci_hcd 0000:00:13.1: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[  206.071829] ohci_hcd 0000:00:13.2: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[  206.071855] ohci_hcd 0000:00:13.3: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[  206.071881] ohci_hcd 0000:00:13.4: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[  206.071913] ehci_hcd 0000:00:13.5: restoring config space at
> offset 0x1 (was 0x2b00000, writing 0x2b00013)
> <7>[  206.072021] HDA Intel 0000:00:14.2: restoring config space at
> offset 0x1 (was 0x4100006, writing 0x4100002)
> <6>[  206.072027] Switched to NOHz mode on CPU #1
> <7>[  206.072103] HDA Intel 0000:01:05.2: restoring config space at
> offset 0xf (was 0x200, writing 0x20a)
> <7>[  206.072109] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x4 (was 0x4, writing 0xfdbfc004)
> <7>[  206.072112] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x3 (was 0x0, writing 0x4008)
> <7>[  206.072115] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100002)
> <7>[  206.072138] r8169 0000:02:00.0: restoring config space at offset
> 0xf (was 0x100, writing 0x10a)
> <7>[  206.072152] r8169 0000:02:00.0: restoring config space at offset
> 0x6 (was 0x4, writing 0xfdfff004)
> <7>[  206.072157] r8169 0000:02:00.0: restoring config space at offset
> 0x4 (was 0x1, writing 0xee01)
> <7>[  206.072162] r8169 0000:02:00.0: restoring config space at offset
> 0x3 (was 0x0, writing 0x8)
> <7>[  206.072168] r8169 0000:02:00.0: restoring config space at offset
> 0x1 (was 0x100000, writing 0x100407)
> <7>[  206.072209] saa7134 0000:03:06.0: restoring config space at offset
> 0xf (was 0x2054017b, writing 0x205401ff)
> <7>[  206.072230] saa7134 0000:03:06.0: restoring config space at offset
> 0x4 (was 0x0, writing 0xfdeff000)
> <7>[  206.072235] saa7134 0000:03:06.0: restoring config space at offset
> 0x3 (was 0xcd00, writing 0x4000)
> <7>[  206.072242] saa7134 0000:03:06.0: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900006)
> <7>[  206.072264] pci 0000:03:07.0: restoring config space at offset 0xf
> (was 0x200001ff, writing 0x2000010b)
> <7>[  206.072284] pci 0000:03:07.0: restoring config space at offset 0x5
> (was 0x1, writing 0xcf01)
> <7>[  206.072290] pci 0000:03:07.0: restoring config space at offset 0x4
> (was 0xfdeff000, writing 0xfdefe000)
> <7>[  206.072295] pci 0000:03:07.0: restoring config space at offset 0x3
> (was 0x4000, writing 0x4008)
> <7>[  206.072302] pci 0000:03:07.0: restoring config space at offset 0x1
> (was 0x2100006, writing 0x2100007)
> <6>[  206.072442] PM: early resume of devices complete after 0.787 msecs
> <6>[  206.072599] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> <6>[  206.072670] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low)
> -> IRQ 18
> <6>[  206.072730] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level,
> low) -> IRQ 19
> <6>[  206.072794] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[  206.072847] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[  206.072851] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[  206.072870] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[  206.072883] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[  206.072897] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level,
> low) -> IRQ 19
> <6>[  206.072934] saa7133[0]: board init: gpio is 600e000
> <6>[  206.072951] pcieport 0000:00:07.0: wake-up capability disabled by ACPI
> <7>[  206.072956] r8169 0000:02:00.0: PME# disabled
> <5>[  206.073028] sd 0:0:0:0: [sda] Starting disk
> <5>[  206.073067] sd 1:0:0:0: [sdb] Starting disk
> <5>[  206.073097] sd 2:0:0:0: [sdc] Starting disk
> <6>[  206.074033] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[  206.074046] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[  206.074469] serial 00:08: activated
> <6>[  206.074772] parport_pc 00:09: activated
> <6>[  206.079074] r8169 0000:02:00.0: eth0: link down
> <6>[  206.160028] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
> <6>[  206.166059] radeon 0000:01:05.0: WB enabled
> <6>[  206.166072] [drm] radeon: ring at 0x0000000080001000
> <6>[  206.166092] [drm] ring test succeeded in 1 usecs
> <6>[  206.166102] [drm] ib test succeeded in 0 usecs
> <6>[  206.316024] usb 3-2: reset full speed USB device number 2 using
> ohci_hcd
> <4>[  206.469919] btusb 3-2:1.0: no reset_resume for driver btusb?
> <4>[  206.469921] btusb 3-2:1.1: no reset_resume for driver btusb?
> <3>[  206.532015] ata4: softreset failed (device not ready)
> <4>[  206.532018] ata4: applying SB600 PMP SRST workaround and retrying
> <6>[  206.687032] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> <6>[  206.688553] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  206.731100] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  206.731103] ata4.00: configured for UDMA/100
> <6>[  207.783243] r8169 0000:02:00.0: eth0: link up
> <3>[  209.184023] ata3: softreset failed (device not ready)
> <4>[  209.184026] ata3: applying SB600 PMP SRST workaround and retrying
> <6>[  209.339024] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[  209.369662] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  209.370622] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  209.370624] ata3.00: configured for UDMA/133
> <3>[  213.774015] ata1: softreset failed (device not ready)
> <4>[  213.774017] ata1: applying SB600 PMP SRST workaround and retrying
> <6>[  213.929032] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[  213.931017] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  213.933047] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  213.933050] ata1.00: configured for UDMA/133
> <3>[  214.642028] ata2: softreset failed (device not ready)
> <4>[  214.642030] ata2: applying SB600 PMP SRST workaround and retrying
> <6>[  214.797027] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[  216.505430] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  216.508803] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  216.508805] ata2.00: configured for UDMA/133
> <6>[  217.503047] PM: resume of devices complete after 11430.526 msecs
> <4>[  217.503413] Restarting tasks ... done.
> <6>[  217.806383] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  217.808438] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  217.808445] ata1.00: configured for UDMA/133
> <6>[  217.808452] ata1: EH complete
> <6>[  218.091813] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  218.095202] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  218.095211] ata2.00: configured for UDMA/133
> <6>[  218.095218] ata2: EH complete
> <6>[  218.512110] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  218.513141] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[  218.513158] ata3.00: configured for UDMA/133
> <6>[  218.513177] ata3: EH complete
> <6>[  218.605404] EXT4-fs (dm-4): re-mounted. Opts: commit=0
> <6>[  218.612182] EXT4-fs (dm-7): re-mounted. Opts: commit=0
> <6>[  218.627577] EXT4-fs (dm-6): re-mounted. Opts: commit=0
> <6>[  218.634463] EXT4-fs (dm-0): re-mounted. Opts: commit=0
> <6>[13990.570974] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.573451] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.573460] ata1.00: configured for UDMA/133
> <6>[13990.573468] ata1: EH complete
> <6>[13990.819528] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.823928] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.823936] ata2.00: configured for UDMA/133
> <6>[13990.823943] ata2: EH complete
> <6>[13990.886678] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.887693] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13990.887701] ata3.00: configured for UDMA/133
> <6>[13990.887708] ata3: EH complete
> <6>[13991.140951] EXT4-fs (dm-4): re-mounted. Opts: commit=0
> <6>[13991.148423] EXT4-fs (dm-7): re-mounted. Opts: commit=0
> <6>[13991.161902] EXT4-fs (dm-6): re-mounted. Opts: commit=0
> <6>[13991.169068] EXT4-fs (dm-0): re-mounted. Opts: commit=0
> <6>[13991.650833] PM: Syncing filesystems ... done.
> <4>[13991.788480] Freezing user space processes ...
> <3>[13991.793014] imon:send_packet: task interrupted
> <3>[13991.798014] imon:send_packet: task interrupted
> <4>[13991.810018] (elapsed 0.02 seconds) done.
> <4>[13991.810020] Freezing remaining freezable tasks ... (elapsed 0.01
> seconds) done.
> <4>[13991.821034] Suspending console(s) (use no_console_suspend to debug)
> <5>[13991.852176] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
> <5>[13991.852229] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
> <5>[13991.852272] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> <5>[13991.852353] sd 2:0:0:0: [sdc] Stopping disk
> <5>[13991.852358] sd 1:0:0:0: [sdb] Stopping disk
> <6>[13991.852409] parport_pc 00:09: disabled
> <6>[13991.852487] serial 00:08: disabled
> <6>[13991.852511] serial 00:08: wake-up capability disabled by ACPI
> <7>[13991.852615] ACPI handle has no context!
> <6>[13991.852672] HDA Intel 0000:01:05.2: PCI INT B disabled
> <7>[13991.852683] ACPI handle has no context!
> <6>[13991.853072] r8169 0000:02:00.0: eth0: link down
> <6>[13991.854632] ATIIXP_IDE 0000:00:14.1: PCI INT A disabled
> <6>[13991.854665] ehci_hcd 0000:00:13.5: PCI INT D disabled
> <6>[13991.854675] ohci_hcd 0000:00:13.4: PCI INT C disabled
> <6>[13991.854698] ohci_hcd 0000:00:13.2: PCI INT C disabled
> <6>[13991.854723] ohci_hcd 0000:00:13.0: PCI INT A disabled
> <6>[13991.863051] ohci_hcd 0000:00:13.3: PCI INT B disabled
> <6>[13991.865036] ohci_hcd 0000:00:13.1: PCI INT B disabled
> <5>[13991.868645] sd 0:0:0:0: [sda] Stopping disk
> <6>[13991.883330] radeon 0000:01:05.0: PCI INT A disabled
> <6>[13991.955068] HDA Intel 0000:00:14.2: PCI INT A disabled
> <6>[13992.544689] ahci 0000:00:12.0: PCI INT A disabled
> <6>[13992.544709] PM: suspend of devices complete after 723.386 msecs
> <7>[13992.544965] r8169 0000:02:00.0: PME# enabled
> <6>[13992.544974] pcieport 0000:00:07.0: wake-up capability enabled by ACPI
> <6>[13992.566165] PM: late suspend of devices complete after 21.451 msecs
> <6>[13992.566445] ACPI: Preparing to enter system sleep state S3
> <6>[13992.566524] PM: Saving platform NVS memory
> <4>[13992.566554] Disabling non-boot CPUs ...
> <6>[13992.567938] CPU 1 is now offline
> <6>[13992.568322] ACPI: Low-level resume complete
> <6>[13992.568322] PM: Restoring platform NVS memory
> <6>[13992.568322] Enabling non-boot CPUs ...
> <6>[13992.570562] Booting Node 0 Processor 1 APIC 0x1
> <7>[13992.570563] smpboot cpu 1: start_ip = 9a000
> <6>[13992.641269] CPU1 is up
> <6>[13992.641492] ACPI: Waking up from system sleep state S3
> <7>[13992.641597] pci 0000:00:00.0: restoring config space at offset 0x3
> (was 0x0, writing 0x4000)
> <7>[13992.641621] pcieport 0000:00:07.0: restoring config space at
> offset 0x1 (was 0x100007, writing 0x100407)
> <7>[13992.641655] ahci 0000:00:12.0: restoring config space at offset
> 0x2 (was 0x1018f00, writing 0x1060100)
> <6>[13992.641673] ahci 0000:00:12.0: set SATA to AHCI mode
> <7>[13992.641695] ohci_hcd 0000:00:13.0: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[13992.641721] ohci_hcd 0000:00:13.1: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[13992.641746] ohci_hcd 0000:00:13.2: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[13992.641771] ohci_hcd 0000:00:13.3: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[13992.641797] ohci_hcd 0000:00:13.4: restoring config space at
> offset 0x1 (was 0x2a00007, writing 0x2a00003)
> <7>[13992.641829] ehci_hcd 0000:00:13.5: restoring config space at
> offset 0x1 (was 0x2b00000, writing 0x2b00013)
> <7>[13992.641913] HDA Intel 0000:00:14.2: restoring config space at
> offset 0x1 (was 0x4100006, writing 0x4100002)
> <7>[13992.641993] HDA Intel 0000:01:05.2: restoring config space at
> offset 0xf (was 0x200, writing 0x20a)
> <7>[13992.641999] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x4 (was 0x4, writing 0xfdbfc004)
> <6>[13992.642028] Switched to NOHz mode on CPU #1
> <7>[13992.642032] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x3 (was 0x0, writing 0x4008)
> <7>[13992.642035] HDA Intel 0000:01:05.2: restoring config space at
> offset 0x1 (was 0x100000, writing 0x100002)
> <7>[13992.642058] r8169 0000:02:00.0: restoring config space at offset
> 0xf (was 0x100, writing 0x10a)
> <7>[13992.642072] r8169 0000:02:00.0: restoring config space at offset
> 0x6 (was 0x4, writing 0xfdfff004)
> <7>[13992.642078] r8169 0000:02:00.0: restoring config space at offset
> 0x4 (was 0x1, writing 0xee01)
> <7>[13992.642082] r8169 0000:02:00.0: restoring config space at offset
> 0x3 (was 0x0, writing 0x8)
> <7>[13992.642088] r8169 0000:02:00.0: restoring config space at offset
> 0x1 (was 0x100000, writing 0x100407)
> <7>[13992.642130] saa7134 0000:03:06.0: restoring config space at offset
> 0xf (was 0x2054017b, writing 0x205401ff)
> <7>[13992.642151] saa7134 0000:03:06.0: restoring config space at offset
> 0x4 (was 0x0, writing 0xfdeff000)
> <7>[13992.642156] saa7134 0000:03:06.0: restoring config space at offset
> 0x3 (was 0xcd00, writing 0x4000)
> <7>[13992.642163] saa7134 0000:03:06.0: restoring config space at offset
> 0x1 (was 0x2900000, writing 0x2900006)
> <7>[13992.642185] pci 0000:03:07.0: restoring config space at offset 0xf
> (was 0x200001ff, writing 0x2000010b)
> <7>[13992.642205] pci 0000:03:07.0: restoring config space at offset 0x5
> (was 0x1, writing 0xcf01)
> <7>[13992.642210] pci 0000:03:07.0: restoring config space at offset 0x4
> (was 0xfdeff000, writing 0xfdefe000)
> <7>[13992.642216] pci 0000:03:07.0: restoring config space at offset 0x3
> (was 0x4000, writing 0x4008)
> <7>[13992.642223] pci 0000:03:07.0: restoring config space at offset 0x1
> (was 0x2100006, writing 0x2100007)
> <6>[13992.642365] PM: early resume of devices complete after 0.794 msecs
> <6>[13992.642490] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) ->
> IRQ 22
> <6>[13992.642553] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[13992.642578] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[13992.642635] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[13992.642656] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level,
> low) -> IRQ 17
> <6>[13992.642672] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level,
> low) -> IRQ 18
> <6>[13992.642683] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level,
> low) -> IRQ 19
> <6>[13992.642696] ATIIXP_IDE 0000:00:14.1: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[13992.642708] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level,
> low) -> IRQ 16
> <6>[13992.642745] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low)
> -> IRQ 18
> <6>[13992.642750] HDA Intel 0000:01:05.2: PCI INT B -> GSI 19 (level,
> low) -> IRQ 19
> <6>[13992.642769] pcieport 0000:00:07.0: wake-up capability disabled by ACPI
> <7>[13992.642775] r8169 0000:02:00.0: PME# disabled
> <6>[13992.643139] serial 00:08: activated
> <6>[13992.643431] parport_pc 00:09: activated
> <6>[13992.643483] saa7133[0]: board init: gpio is 600e000
> <5>[13992.643690] sd 0:0:0:0: [sda] Starting disk
> <5>[13992.643731] sd 1:0:0:0: [sdb] Starting disk
> <5>[13992.643764] sd 2:0:0:0: [sdc] Starting disk
> <6>[13992.649072] r8169 0000:02:00.0: eth0: link down
> <6>[13992.730027] [drm] radeon: 1 quad pipes, 1 z pipes initialized.
> <6>[13992.736224] radeon 0000:01:05.0: WB enabled
> <6>[13992.736257] [drm] radeon: ring at 0x0000000080001000
> <6>[13992.736275] [drm] ring test succeeded in 1 usecs
> <6>[13992.736292] [drm] ib test succeeded in 0 usecs
> <6>[13992.885014] usb 3-2: reset full speed USB device number 2 using
> ohci_hcd
> <4>[13993.037904] btusb 3-2:1.0: no reset_resume for driver btusb?
> <4>[13993.037906] btusb 3-2:1.1: no reset_resume for driver btusb?
> <3>[13993.103027] ata4: softreset failed (device not ready)
> <4>[13993.103030] ata4: applying SB600 PMP SRST workaround and retrying
> <6>[13993.258026] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> <6>[13993.258986] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13993.301531] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13993.301534] ata4.00: configured for UDMA/100
> <6>[13994.394988] r8169 0000:02:00.0: eth0: link up
> <3>[13995.805018] ata3: softreset failed (device not ready)
> <4>[13995.805021] ata3: applying SB600 PMP SRST workaround and retrying
> <6>[13995.960033] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[13995.990710] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13995.991668] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[13995.991670] ata3.00: configured for UDMA/133
> <3>[14000.395016] ata1: softreset failed (device not ready)
> <4>[14000.395019] ata1: applying SB600 PMP SRST workaround and retrying
> <6>[14000.550024] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[14000.552018] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14000.554049] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14000.554051] ata1.00: configured for UDMA/133
> <3>[14001.211018] ata2: softreset failed (device not ready)
> <4>[14001.211021] ata2: applying SB600 PMP SRST workaround and retrying
> <6>[14001.366037] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> <6>[14003.070942] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14003.074337] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14003.074339] ata2.00: configured for UDMA/133
> <6>[14004.069046] PM: resume of devices complete after 11426.606 msecs
> <4>[14004.069403] Restarting tasks ... done.
> <6>[14004.407337] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14004.409365] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14004.409368] ata1.00: configured for UDMA/133
> <6>[14004.409373] ata1: EH complete
> <6>[14004.705354] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14004.708749] ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14004.708757] ata2.00: configured for UDMA/133
> <6>[14004.708763] ata2: EH complete
> <6>[14005.155257] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14005.156333] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> <6>[14005.156336] ata3.00: configured for UDMA/133
> <6>[14005.156341] ata3: EH complete
> <6>[14005.225567] EXT4-fs (dm-4): re-mounted. Opts: commit=0
> <6>[14005.228495] EXT4-fs (dm-7): re-mounted. Opts: commit=0
> <6>[14005.236372] EXT4-fs (dm-6): re-mounted. Opts: commit=0
> <6>[14005.239412] EXT4-fs (dm-0): re-mounted. Opts: commit=0
> <1>[14166.454185] BUG: unable to handle kernel paging request at
> ffffffff88317734
> <1>[14166.454328] IP: [<ffffffff81397cfe>] usb_hcd_irq+0x3/0x58
> <4>[14166.454432] PGD 16c7067 PUD 16cb063 PMD 0
> <0>[14166.454522] Oops: 0000 [#1] PREEMPT SMP
> <4>[14166.454608] CPU 0
> <4>[14166.454645] Modules linked in: saa7134_alsa tda1004x saa7134_dvb
> videobuf_dvb dvb_core ir_kbd_i2c tda827x tda8290 ir_lirc_codec lirc_dev
> ir_sony_decoder snd_hda_codec_realtek ir_jvc_decoder snd_hda_intel
> snd_hda_codec tuner ir_rc6_decoder ir_rc5_decoder parport_pc saa7134
> rc_imon_mce ir_nec_decoder imon parport rc_core snd_hwdep sg
> videobuf_dma_sg videobuf_core v4l2_common videodev rtc_cmos i2c_piix4
> asus_atk0110 pcspkr v4l2_compat_ioctl32 tveeprom atiixp
> <4>[14166.455155]
> <4>[14166.455155] Pid: 0, comm: swapper Not tainted 3.0.3-dirty #37
> System manufacturer System Product Name/M2A-VM HDMI
> <4>[14166.455155] RIP: 0010:[<ffffffff81397cfe>]  [<ffffffff81397cfe>]
> usb_hcd_irq+0x3/0x58
> <4>[14166.455155] RSP: 0018:ffff880077c03ee0  EFLAGS: 00010096
> <4>[14166.455155] RAX: 0000000000000000 RBX: ffff8800737797c0 RCX:
> ffff880077c00000
> <4>[14166.455155] RDX: 0000000000000000 RSI: ffff880073771000 RDI:
> 0000000000000011
> <4>[14166.455155] RBP: ffffffff816ad340 R08: 0000000000000000 R09:
> 0000000000000000
> <4>[14166.455155] R10: 0000000000000000 R11: 00000ce26247d7b8 R12:
> 0000000000000000
> <4>[14166.455155] R13: 0000000000000011 R14: 0000000000000000 R15:
> 0000000000000000
> <4>[14166.455155] FS:  00007fe1c1951700(0000) GS:ffff880077c00000(0000)
> knlGS:0000000000000000
> <4>[14166.455155] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
> <4>[14166.455155] CR2: ffffffff88317734 CR3: 0000000073213000 CR4:
> 00000000000006f0
> <4>[14166.455155] DR0: 0000000000000000 DR1: 0000000000000000 DR2:
> 0000000000000000
> <4>[14166.455155] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7:
> 0000000000000400
> <4>[14166.455155] Process swapper (pid: 0, threadinfo ffffffff816aa000,
> task ffffffff816cd020)
> <0>[14166.455155] Stack:
> <4>[14166.455155]  ffffffff810735f9 ffff880077c0c9c0 ffffffff816ad340
> ffffffff816ad3bc
> <4>[14166.455155]  ffff8800737797c0 ffffffff816abea8 0000000000000000
> 0000000000000000
> <4>[14166.455155]  ffffffff8107371e ffffffff816abea8 ffffffff81049bb3
> ffffffff816ad340
> <0>[14166.455155] Call Trace:
> <0>[14166.455155]  <IRQ>
> <4>[14166.455155]  [<ffffffff810735f9>] ? handle_irq_event_percpu+0x26/0x117
> <4>[14166.455155]  [<ffffffff8107371e>] ? handle_irq_event+0x34/0x52
> <4>[14166.455155]  [<ffffffff81049bb3>] ? sched_clock_local+0x13/0x76
> <4>[14166.455155]  [<ffffffff81075500>] ? handle_fasteoi_irq+0x78/0x9c
> <4>[14166.455155]  [<ffffffff81003f32>] ? handle_irq+0x17/0x1d
> <4>[14166.455155]  [<ffffffff8100381e>] ? do_IRQ+0x45/0xaa
> <4>[14166.455155]  [<ffffffff814c4913>] ? common_interrupt+0x13/0x13
> <0>[14166.455155]  <EOI>
> <4>[14166.455155]  [<ffffffff81008c8c>] ? default_idle+0x20/0x34
> <4>[14166.455155]  [<ffffffff81008de8>] ? amd_e400_idle+0xe3/0xe7
> <4>[14166.455155]  [<ffffffff81001d62>] ? cpu_idle+0x56/0x93
> <4>[14166.455155]  [<ffffffff8172697d>] ? start_kernel+0x354/0x35f
> <4>[14166.455155]  [<ffffffff8172619e>] ? x86_64_start_kernel+0xea/0xee
> <0>[14166.455155] Code: 89 3a 76 3e 89 3f 76 39 89 37 75 35 89 35 75 3b
> 88 40 76 3b 88 3a 76 39 88 35 76 39 88 3d 76 37 89 36 76 39 88 39 76 3e
> 89 41 76
> <39>[14166.459639]  88 34 77 31 88 31 78 30 87 2f 79 2d 84 2b 7b 2a 83
> 2a 7c 2d
> <1>[14166.459639] RIP  [<ffffffff81397cfe>] usb_hcd_irq+0x3/0x58
> <4>[14166.459639]  RSP <ffff880077c03ee0>
> <0>[14166.459639] CR2: ffffffff88317734
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux