Hi,
> On 07-09-2011 21:02, Ajay Kumar Gupta wrote:
>
> > Adding ti81xx_musb_phy_power() which will be used by musb driver
> through
> > its function pointer in board_data.
>
> > Signed-off-by: Ajay Kumar Gupta<ajay.gupta@xxxxxx>
> > Signed-off-by: Ravi Babu<ravibabu@xxxxxx>
> > ---
> > arch/arm/mach-omap2/omap_phy_internal.c | 24
> +++++++++++++++++++++++
> > arch/arm/plat-omap/include/plat/usb.h | 32
> +++++++++++++++++++++++++++++++
> > 2 files changed, 56 insertions(+), 0 deletions(-)
>
> > diff --git a/arch/arm/mach-omap2/omap_phy_internal.c b/arch/arm/mach-
> omap2/omap_phy_internal.c
> > index 58775e3..352b6af 100644
> > --- a/arch/arm/mach-omap2/omap_phy_internal.c
> > +++ b/arch/arm/mach-omap2/omap_phy_internal.c
> > @@ -260,3 +260,27 @@ void am35x_set_mode(u8 musb_mode)
> >
> > omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
> > }
> > +
> > +void ti81xx_musb_phy_power(u8 on)
> > +{
> > + u32 usbphycfg = omap_ctrl_readl(USBCTRL0);
> > +
> > + if (on) {
> > + if (cpu_is_ti816x()) {
> > + usbphycfg |= TI816X_USBPHY0_NORMAL_MODE;
> > + usbphycfg &= ~TI816X_USBPHY_REFCLK_OSC;
> > + } else if (cpu_is_ti814x()) {
> > + usbphycfg&= ~(USBPHY_CM_PWRDN | USBPHY_OTG_PWRDN
> > + | USBPHY_DPINPUT | USBPHY_DMINPUT);
> > + usbphycfg |= (USBPHY_OTGVDET_EN |
> USBPHY_OTGSESSEND_EN
> > + | USBPHY_DPOPBUFCTL | USBPHY_DPOPBUFCTL);
>
> Same #define repeated twice?
Good catch.. thanks. One of them should be USBPHY_DMOPBUFCTL, will fix in v3.
Ajay
>
> WBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
