On Thu, Aug 11, 2011 at 8:05 PM, Sarah Sharp
<sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
> On Thu, Aug 11, 2011 at 07:27:15PM +0200, Daniel Mack wrote:
>> On Thu, Aug 11, 2011 at 6:45 PM, Sarah Sharp
>> <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
>> > On Thu, Aug 11, 2011 at 02:57:41AM +0200, Daniel Mack wrote:
>> >> On Thu, Aug 11, 2011 at 1:15 AM, Sarah Sharp
>> >> <sarah.a.sharp@xxxxxxxxxxxxxxx> wrote:
>> >> > On Wed, Aug 10, 2011 at 05:33:02PM +0200, Daniel Mack wrote:
>> >> >> On 08/10/2011 04:32 PM, Alan Stern wrote:
>> >> >> >Looking at the driver's current code, it appears that your patch
>> >> >> >does not fix the bug properly. Using discontiguous regions in the
>> >> >> >transfer buffer is perfectly okay. The real problem is later on,
>> >> >> >where you do:
>> >> >> >
>> >> >> >if (send_it) { out->number_of_packets = FRAMES_PER_URB;
>> >> >> >
>> >> >> >This should be
>> >> >> >
>> >> >> >out->number_of_packets = outframe;
>> >> >> >
>> >> >> >The way it is now, the USB stack will try to use data from all the
>> >> >> >frame descriptors, and the last few will be stale because the loop
>> >> >> >doesn't set them.
>> >> >>
>> >> >> That's actually true, even though it doesn't seem to cause any trouble.
>> >> >> I tested everything here of course, and the output URBs return back from
>> >> >> the USB stack with their length fields zeroed out, which then
>> >> >> causes the stack to send packets with zero-length fields at the end.
>> >> >
>> >> > Actually, it causes system hangs when the driver is loaded on a device
>> >> > attached to a USB 3.0 port, as Alan Stern pointed out:
>> >> >
>> >> > https://bugzilla.kernel.org/show_bug.cgi?id=40702
>> >>
>> >> Yes, I've noticed this.
>> >>
>> >> > Please don't submit zero-length transfers. The xHCI driver just isn't
>> >> > able to handle it. Arguably, it probably should have just rejected your
>> >> > URB when it found a zero length buffer, so I'll probably be submitting a
>> >> > patch to fix that.
>> >>
>> >> According to the spec, sending zero-length frames should be fine, no?
>> >> Is there any particular reason why XCHI can't handle this while EHCI
>> >> can? And does my patch fix the driver for XHCI?
>> >
>> > Ok, yes, you're correct that the xHCI spec allows the transfer length to
>> > be set to zero. In the case where the frame buffer is zero-length, is
>> > the buffer pointer still valid? It's not clear from the spec whether it
>> > needs to be.
>>
>> Well, the buffer pointer is set in the URB, not in its individual iso
>> subframes which just denotes them via the offset field. So yes, it is
>> valid in my case. But it doesn't matter anymore, as the code which
>> does that is now gone :)
>
> Do you mean it was removed with this patch:
>
> http://git.kernel.org/?p=linux/kernel/git/tiwai/sound-2.6.git;a=commitdiff;h=15439b
>
> Because according to Matej, he applied that patch, plus my patch to
> reject zero-length buffers[1], and he saw debugging that indicated he
> *did* see zero-length buffers. Is there any chance your driver might
> submit a zero-length buffer in the middle of the isochronous URB
> transfer array?
Hmm, judging from the code, this can only ever happen if we receive an
inbound iso frame which has a valid status and an actual_length of
zero. Also, it was not neccessary to catch this case for EHCI.
Maetj, does this patch make any difference?
Daniel
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index aa52b3e..b48adb9 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -633,6 +634,10 @@ static void read_completed(struct urb *urb)
continue;
len = urb->iso_frame_desc[outframe].actual_length;
+
+ if (len == 0)
+ continue;
+
out->iso_frame_desc[outframe].length = len;
out->iso_frame_desc[outframe].actual_length = 0;
out->iso_frame_desc[outframe].offset = offset;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
