Hi Guys, I'm trying to get a FTDI FT232RL based USB adaptor to work on a PogoPlug Pro running the latest supported ArchLinuxARM distro which is running 2.6.31.6. This has version 1.5.0 of the ftdi_sio driver. When I connect the FT2332Rl based device I get the following errors in the system log: [ 1313.030000] usb 1-1.4: new full speed USB device using oxnas-ehci and address 4 [ 1323.140000] usb 1-1.4: unable to read config index 0 descriptor/start: -110 [ 1323.140000] usb 1-1.4: chopping to 0 config(s) [ 1333.140000] usb 1-1.4: string descriptor 0 read error: -110 [ 1333.140000] usb 1-1.4: New USB device found, idVendor=0403, idProduct=6001 [ 1333.140000] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1333.140000] usb 1-1.4: no configuration chosen from 0 choices And I don't get any device created under /dev I can plug-in a FT232BM based device and it all works fine and creates a device /dev/ttyUSB0 I have tried both adaptors on the latest ArchLinux PC version on a VM and both initialise and create /dev/ttyUSB* devices fine so I'm pretty sure the hardware is fine. Does anyone know of a way I can get this to work on this system without upgrading etc? Regards Alex Shepherd -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
