From: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> The USB 3.0 specification says that the bMaxBurst field in the SuperSpeed Endpoint Companion descriptor is supposed to indicate how many packets a SS device can handle before it needs to wait for an explicit handshake from the host controller. A zero value means the device can only handle one packet before it needs a handshake. Remove a warning in the xHCI driver that implies this is an invalid value. Signed-off-by: Sarah Sharp <sarah.a.sharp@xxxxxxxxxxxxxxx> --- drivers/usb/host/xhci-mem.c | 2 -- 1 files changed, 0 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 0f8e1d2..fcb7f7e 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1215,8 +1215,6 @@ int xhci_endpoint_init(struct xhci_hcd *xhci, ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet)); /* dig out max burst from ep companion desc */ max_packet = ep->ss_ep_comp.bMaxBurst; - if (!max_packet) - xhci_warn(xhci, "WARN no SS endpoint bMaxBurst\n"); ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet)); break; case USB_SPEED_HIGH: -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
