Re: xhci_hcd Warn: Stalled Endpoint with USB 3.0 to esata connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



I'm running server and not using an interface.  Can you point me to the config file?

Thanks

Sent from my iPhone

On Jun 24, 2011, at 1:09 AM, "Xu, Andiry" <Andiry.Xu@xxxxxxx> wrote:

>> -----Original Message-----
>> From: M. Steven Ginn [mailto:sginn@xxxxxxx]
>> Sent: Friday, June 24, 2011 1:40 PM
>> To: Xu, Andiry
>> Cc: Alan Stern; linux-usb@xxxxxxxxxxxxxxx;
>> sarah.a.sharp@xxxxxxxxxxxxxxx
>> Subject: Re: xhci_hcd Warn: Stalled Endpoint with USB 3.0 to esata
>> connection
>> 
>> Where do I enable these?  In udev or some other config file?
>> 
> 
> Run make menuconfig, they're in Device Drivers --> USB support
> 
> Thanks,
> Andiry
> 
>> 
>> On Jun 23, 2011, at 11:58 PM, "Xu, Andiry" <Andiry.Xu@xxxxxxx> wrote:
>> 
>>>> -----Original Message-----
>>>> From: linux-usb-owner@xxxxxxxxxxxxxxx [mailto:linux-usb-
>>>> owner@xxxxxxxxxxxxxxx] On Behalf Of M. Steven Ginn
>>>> Sent: Friday, June 24, 2011 6:51 AM
>>>> To: Alan Stern
>>>> Cc: linux-usb@xxxxxxxxxxxxxxx; <sarah.a.sharp@xxxxxxxxxxxxxxx
>>>> Subject: Re: xhci_hcd Warn: Stalled Endpoint with USB 3.0 to esata
>>>> connection
>>>> 
>>>> If they aren't the problem, then why aren't the drives showing up
> in
>>>> gparted?  Not sure where to look to try and trouble shoot this.  I
>> was
>>>> hoping the syslog would indicate some other issue.
>>>> 
>>> 
>>> You can enable CONFIG_USB_DEBUG and CONFIG_USB_XHCI_HCD_DEBUGGING.
>>> That may tell more useful information.
>>> 
>>> Thanks,
>>> Andiry
>>> 
>>> 
>>>> 
>>>> On Jun 23, 2011, at 4:40 PM, Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
>>>> wrote:
>>>> 
>>>>> On Thu, 23 Jun 2011, M. Steven Ginn wrote:
>>>>> 
>>>>>> Is there another list or place that is better for me to post to
>>>> regarding this messed up USB 3.0 issue that I am having?
>>>>> 
>>>>> You should CC the XHCI maintainer: Sarah Sharp
>>>>> <sarah.a.sharp@xxxxxxxxxxxxxxx>.  She hasn't been very active on
>> the
>>>>> mailing lists recently; maybe she's on vacation.
>>>>> 
>>>>> Incidentally, those "Stalled Endpoint" messages you're getting are
>>>>> normal.  They don't indicate any problem as far as I can tell.
>>>>> 
>>>>> Alan Stern
>>>>> 
>>>> --
>>>> To unsubscribe from this list: send the line "unsubscribe
> linux-usb"
>>> in
>>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>>> 
>>> 
>>> --
>>> To unsubscribe from this list: send the line "unsubscribe linux-usb"
>> in
>>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-usb" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux