Re: [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jun 21, 2011 at 4:17 PM, PRAVEEN PANERI <p.paneri@xxxxxxxxxxx> wrote:
>
> Hi,
>
> On Tue, Jun 21, 2011 at 12:33:44PM +0530, p.paneri@xxxxxxxxxxx wrote:
> > From: Praveen Paneri
> >
> > Adding dwc driver name in existing platform device
> > to probe DWC OTG driver.
> > Introduced otg_set_platdata function to pass platform data
> > Added selectable config option to add DWC OTG driver for different
> > machines.
> >
> > Signed-off-by: Praveen Paneri
> > ---
> >  arch/arm/plat-samsung/Kconfig         |    6 ++++++
> >  arch/arm/plat-samsung/Makefile        |    1 +
> >  arch/arm/plat-samsung/dev-usb-hsotg.c |   20 ++++++++++++++++++++
> >  3 files changed, 27 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> > index 4d79519..58ed8b1 100644
> > --- a/arch/arm/plat-samsung/Kconfig
> > +++ b/arch/arm/plat-samsung/Kconfig
> > @@ -227,6 +227,12 @@ config S3C_DEV_USB_HSOTG
> >   help
> >     Compile in platform device definition for USB high-speed OtG
> >
> > +config S3C_DEV_DWC_OTG
> > + bool
> > + help
> > +   Compile in platform device definition for DWC OTG. This
> > +   will make it selectable for different machines.
> > +
> >  config S3C_DEV_WDT
> >   bool
> >   default y if ARCH_S3C2410
> > diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> > index 53eb15b..785ca79 100644
> > --- a/arch/arm/plat-samsung/Makefile
> > +++ b/arch/arm/plat-samsung/Makefile
> > @@ -49,6 +49,7 @@ obj-$(CONFIG_S3C_DEV_FB) += dev-fb.o
> >  obj-y += dev-uart.o
> >  obj-$(CONFIG_S3C_DEV_USB_HOST) += dev-usb.o
> >  obj-$(CONFIG_S3C_DEV_USB_HSOTG) += dev-usb-hsotg.o
> > +obj-$(CONFIG_S3C_DEV_DWC_OTG) += dev-usb-hsotg.o
> >  obj-$(CONFIG_S3C_DEV_WDT) += dev-wdt.o
> >  obj-$(CONFIG_S3C_DEV_NAND) += dev-nand.o
> >  obj-$(CONFIG_S3C_DEV_ONENAND) += dev-onenand.o
> > diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
> > index 33a844a..7e6228b 100644
> > --- a/arch/arm/plat-samsung/dev-usb-hsotg.c
> > +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
> > @@ -20,6 +20,8 @@
> >  #include
> >
> >  #include
> > +#include
> > +#include
> >
> >  static struct resource s3c_usb_hsotg_resources[] = {
> >   [0] = {
> > @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = {
> >  static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
> >
> >  struct platform_device s3c_device_usb_hsotg = {
> > +#ifdef CONFIG_S3C_DEV_USB_HSOTG
> >   .name = "s3c-hsotg",
> > +#endif
> > +#ifdef CONFIG_S3C_DEV_DWC_OTG
> > + .name = "dwc_otg",
> > +#endif
>
> no, don't do that. See we're going through a big re-factor on the gadget
> framework to allow multiple UDC drivers to be compiled as modules. The
> idea is to be able to have distro-like kernels for embedded too.
It can be build as a module but need to make necessary modifications in
platform code. Will modify according to the gadget framework.
Thanks for the comment.
paneri
>
> Take a look at my gadget branch [1] and see how the gadget controllers
> are modified to start allowing that.
>
> I also have patch to the Kconfig allowing all controllers to be enabled
> as modules, I just need some more time to figure out one warning on the
> renenesas controller.
>
> IOW, it's best to add both platform devices. Or move to device tree.
>
> --
> balbi
>
>
>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux