Re: [RFC][PATCH 2/5] ARM: SAMSUNG: Changing the build condition of OTG platform device for samsung.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On Tue, Jun 21, 2011 at 12:33:44PM +0530, p.paneri@xxxxxxxxxxx wrote:
> From: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> 
> Adding dwc driver name in existing platform device
> to probe DWC OTG driver.
> Introduced otg_set_platdata function to pass platform data
> Added selectable config option to add DWC OTG driver for different
> machines.
> 
> Signed-off-by: Praveen Paneri <p.paneri@xxxxxxxxxxx>
> ---
>  arch/arm/plat-samsung/Kconfig         |    6 ++++++
>  arch/arm/plat-samsung/Makefile        |    1 +
>  arch/arm/plat-samsung/dev-usb-hsotg.c |   20 ++++++++++++++++++++
>  3 files changed, 27 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
> index 4d79519..58ed8b1 100644
> --- a/arch/arm/plat-samsung/Kconfig
> +++ b/arch/arm/plat-samsung/Kconfig
> @@ -227,6 +227,12 @@ config S3C_DEV_USB_HSOTG
>  	help
>  	  Compile in platform device definition for USB high-speed OtG
>  
> +config S3C_DEV_DWC_OTG
> +	bool
> +	help
> +	  Compile in platform device definition for DWC OTG. This
> +	  will make it selectable for different machines.
> +
>  config S3C_DEV_WDT
>  	bool
>  	default y if ARCH_S3C2410
> diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
> index 53eb15b..785ca79 100644
> --- a/arch/arm/plat-samsung/Makefile
> +++ b/arch/arm/plat-samsung/Makefile
> @@ -49,6 +49,7 @@ obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
>  obj-y				+= dev-uart.o
>  obj-$(CONFIG_S3C_DEV_USB_HOST)	+= dev-usb.o
>  obj-$(CONFIG_S3C_DEV_USB_HSOTG)	+= dev-usb-hsotg.o
> +obj-$(CONFIG_S3C_DEV_DWC_OTG)	+= dev-usb-hsotg.o
>  obj-$(CONFIG_S3C_DEV_WDT)	+= dev-wdt.o
>  obj-$(CONFIG_S3C_DEV_NAND)	+= dev-nand.o
>  obj-$(CONFIG_S3C_DEV_ONENAND)	+= dev-onenand.o
> diff --git a/arch/arm/plat-samsung/dev-usb-hsotg.c b/arch/arm/plat-samsung/dev-usb-hsotg.c
> index 33a844a..7e6228b 100644
> --- a/arch/arm/plat-samsung/dev-usb-hsotg.c
> +++ b/arch/arm/plat-samsung/dev-usb-hsotg.c
> @@ -20,6 +20,8 @@
>  #include <mach/map.h>
>  
>  #include <plat/devs.h>
> +#include <plat/otg.h>
> +#include <plat/usb-phy.h>
>  
>  static struct resource s3c_usb_hsotg_resources[] = {
>  	[0] = {
> @@ -37,7 +39,12 @@ static struct resource s3c_usb_hsotg_resources[] = {
>  static u64 s3c_hsotg_dmamask = DMA_BIT_MASK(32);
>  
>  struct platform_device s3c_device_usb_hsotg = {
> +#ifdef CONFIG_S3C_DEV_USB_HSOTG
>  	.name		= "s3c-hsotg",
> +#endif
> +#ifdef CONFIG_S3C_DEV_DWC_OTG
> +	.name		= "dwc_otg",
> +#endif

no, don't do that. See we're going through a big re-factor on the gadget
framework to allow multiple UDC drivers to be compiled as modules. The
idea is to be able to have distro-like kernels for embedded too.

Take a look at my gadget branch [1] and see how the gadget controllers
are modified to start allowing that.

I also have patch to the Kconfig allowing all controllers to be enabled
as modules, I just need some more time to figure out one warning on the
renenesas controller.

IOW, it's best to add both platform devices. Or move to device tree.

-- 
balbi

Attachment: signature.asc
Description: Digital signature


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux