Add support for USB ULPI (external) PHY for P101x platforms
for both USB Host and Peripheral modes
Signed-off-by: Ramneek Mehresh <ramneek.mehresh@xxxxxxxxxxxxx>
---
drivers/usb/gadget/fsl_udc_core.c | 4 ++++
drivers/usb/gadget/fsl_usb2_udc.h | 1 +
drivers/usb/host/ehci-fsl.c | 4 ++++
drivers/usb/host/ehci-fsl.h | 1 +
4 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c
index 875eb75..8ad4876 100644
--- a/drivers/usb/gadget/fsl_udc_core.c
+++ b/drivers/usb/gadget/fsl_udc_core.c
@@ -244,6 +244,10 @@ static int dr_controller_setup(struct fsl_udc *udc)
portctrl &= ~(PORTSCX_PHY_TYPE_SEL | PORTSCX_PORT_WIDTH);
switch (udc->phy_mode) {
case FSL_USB2_PHY_ULPI:
+#if defined(CONFIG_FSL_SOC_BOOKE)
+ clrsetbits_be32(&usb_sys_regs->control, USB_CTRL_UTMI_PHY_EN,
+ USB_CTRL_ULPI_PHY_CLK_SEL);
+#endif
portctrl |= PORTSCX_PTS_ULPI;
break;
case FSL_USB2_PHY_UTMI_WIDE:
diff --git a/drivers/usb/gadget/fsl_usb2_udc.h b/drivers/usb/gadget/fsl_usb2_udc.h
index b955eec..b52b6af 100644
--- a/drivers/usb/gadget/fsl_usb2_udc.h
+++ b/drivers/usb/gadget/fsl_usb2_udc.h
@@ -352,6 +352,7 @@ struct usb_sys_interface {
#define USB_CTRL_UTMI_PHY_EN 0x00000200
#define USB_CTRL_USB_EN 0x00000004
#define USB_CTRL_PHY_CLK_VLD 0x00020000
+#define USB_CTRL_ULPI_PHY_CLK_SEL 0x00000400
/* Endpoint Queue Head data struct
* Rem: all the variables of qh are LittleEndian Mode
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index f670052..9923806 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -226,6 +226,10 @@ static void ehci_fsl_setup_phy(struct ehci_hcd *ehci,
switch (phy_mode) {
case FSL_USB2_PHY_ULPI:
+#if defined(CONFIG_FSL_SOC_BOOKE)
+ setbits32(non_ehci + FSL_SOC_USB_CTRL, FSL_SOC_USB_CTRL |
+ USB_CTRL_USB_EN | ULPI_PHY_CLK_SEL);
+#endif
portsc |= PORT_PTS_ULPI;
break;
case FSL_USB2_PHY_SERIAL:
diff --git a/drivers/usb/host/ehci-fsl.h b/drivers/usb/host/ehci-fsl.h
index cdf1b47..d8db143 100644
--- a/drivers/usb/host/ehci-fsl.h
+++ b/drivers/usb/host/ehci-fsl.h
@@ -56,5 +56,6 @@
#define OTG_PORT (1<<5)
#define PLL_RESET (1<<8)
#define UTMI_PHY_EN (1<<9)
+#define ULPI_PHY_CLK_SEL (1<<10)
#define PHY_CLK_VLD (1<<17)
#endif /* _EHCI_FSL_H */
--
1.6.1
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
