From: Libor Pechacek <lpechacek@xxxxxxx> Protocol stall should not be fatal while reading port or hub status as it is transient state. Currently hub EP0 STALL during port status read results in failed device enumeration. This has been observed with ST-Ericsson (formerly Philips) USB 2.0 Hub (04cc:1521) after connecting keyboard. Signed-off-by: Libor Pechacek <lpechacek@xxxxxxx> Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> Cc: stable <stable@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/usb/core/hub.c | 6 ++++-- 1 files changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 79a58c3..90ae175 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -339,7 +339,8 @@ static int get_hub_status(struct usb_device *hdev, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB, 0, 0, data, sizeof(*data), USB_STS_TIMEOUT); @@ -355,7 +356,8 @@ static int get_port_status(struct usb_device *hdev, int port1, { int i, status = -ETIMEDOUT; - for (i = 0; i < USB_STS_RETRIES && status == -ETIMEDOUT; i++) { + for (i = 0; i < USB_STS_RETRIES && + (status == -ETIMEDOUT || status == -EPIPE); i++) { status = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0), USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT, 0, port1, data, sizeof(*data), USB_STS_TIMEOUT); -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html