On 08/06/2011 16:46, Alan Cox wrote:
This patch adds checking for how many bytes have been inserted into the tty
buffer and places data which hasn't been inserted into a pending buffer list.
The pending buffer list is pushed to the tty buffer when the tty unthrottles
I don't think this is the way to tackle it.
Fair enough. I wasn't 100% sure that adding what is really an extra
layer of buffering in the driver was the best solution.
If the kernel tty buffer code is shedding data then not only have we
asserted a throttle but 64K has been accumulated or the system is out of
memory.
So the questions to me are:
a) Why is your setup filling 64K in the time it takes the throttle
response to occur
The setup is a Nokia mobile phone sending some application data over a
USB connection. Applications running on Nokia's Symbian based mobile
phones which wish to communicate with a PC over USB are offered a
virtual COM port on the mobile phone side. This COM port appears as a
second cdc-acm device to the PC.
In this particular instance the device is sending a large quantity of
data (about 1MB) down the COM port. This communication is one way, so
the device keeps sending the data as fast as the PC requests more USB
bulk transfers.
If it hasn't been told to throttle then the cdc-acm code will issue more
bulk reads as soon as the last one has completed. This means that it's
possible for the tty to not have a chance to be throttle by
flush_to_ldisc before too much data has been received over USB.
b) Do we care (is the right thing to do to lose bits anyway at that point)
The cdc-acm driver which Nokia provide for Windows doesn't drop data
when transferring large volumes of data, so most application making use
of the mobile phone to PC USB connection won't have implemented any form
of error correction or retransmission. If we don't care about data loss
on Linux then it will force the application layer to implement some way
of detecting these losses and to then retransmit the data.
c) What should we do about it in the *general* case
It seems to me either its a cdc-acm specific problem with throttle
response behaviour, or its a general case at very high speed (which seems
more likely). In neither case is adding an extra queue to paper over it
the right solution.
Agreed. I'm not sure about how specific to cdc-acm it is though. I think
the reason that I'm seeing this problem is due to the high data rate of
USB combined with the protocol that is being used over the cdc-acm
channel not having any flow control or acknowledgements. I have no idea
how specialist this situation is though.
I think a possible alternative solution for the cdc-acm would be for it
to make sure that tty_buffer_request_room returns enough space for any
pending URB requests. However I think I originally dismissed this as a
possibility as I couldn't think of an easy way for the cdc-acm driver to
be told that more buffer room has been made available.
Regards,
Toby
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html