This patch adds SS support to the dummy hcd module. It may be used to test
SS device when no (SS) HW is available.
USB 3.0 hub includes 2 hubs - HS and SS ones.
This patch adds support for a SS hub in the dummy_hcd module. Thus, when
dummy_hcd enabled it will register 2 root hubs (SS and HS).
Signed-off-by: Tatyana Brokhman <tlinder@xxxxxxxxxxxxxx>
---
drivers/usb/gadget/dummy_hcd.c | 924 +++++++++++++++++++++++++++++-----------
1 files changed, 679 insertions(+), 245 deletions(-)
diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c
index 61ff9279..5cd6931 100644
--- a/drivers/usb/gadget/dummy_hcd.c
+++ b/drivers/usb/gadget/dummy_hcd.c
@@ -152,6 +152,24 @@ enum dummy_rh_state {
DUMMY_RH_RUNNING
};
+struct dummy_hcd {
+ struct usb_hcd *hcd;
+
+ struct dummy *dum;
+ enum dummy_rh_state rh_state;
+ struct timer_list timer;
+ u32 port_status;
+ u32 old_status;
+ unsigned resuming:1;
+ unsigned long re_timeout;
+
+ struct usb_device *udev;
+ struct list_head urbp_list;
+
+ unsigned active:1;
+ unsigned old_active:1;
+};
+
struct dummy {
spinlock_t lock;
@@ -167,36 +185,28 @@ struct dummy {
u16 devstatus;
unsigned udc_suspended:1;
unsigned pullup:1;
- unsigned active:1;
- unsigned old_active:1;
/*
* MASTER/HOST side support
*/
- enum dummy_rh_state rh_state;
- struct timer_list timer;
- u32 port_status;
- u32 old_status;
- unsigned resuming:1;
- unsigned long re_timeout;
+ struct dummy_hcd *hs_hcd;
+ struct dummy_hcd *ss_hcd;
- struct usb_device *udev;
- struct list_head urbp_list;
};
-static inline struct dummy *hcd_to_dummy (struct usb_hcd *hcd)
+static inline struct dummy_hcd *hcd_to_dummy_hcd(struct usb_hcd *hcd)
{
- return (struct dummy *) (hcd->hcd_priv);
+ return (struct dummy_hcd *) (hcd->hcd_priv);
}
-static inline struct usb_hcd *dummy_to_hcd (struct dummy *dum)
+static inline struct usb_hcd *dummy_hcd_to_hcd(struct dummy_hcd *dum)
{
return container_of((void *) dum, struct usb_hcd, hcd_priv);
}
-static inline struct device *dummy_dev (struct dummy *dum)
+static inline struct device *dummy_dev(struct dummy_hcd *dum)
{
- return dummy_to_hcd(dum)->self.controller;
+ return dummy_hcd_to_hcd(dum)->self.controller;
}
static inline struct device *udc_dev (struct dummy *dum)
@@ -209,9 +219,13 @@ static inline struct dummy *ep_to_dummy (struct dummy_ep *ep)
return container_of (ep->gadget, struct dummy, gadget);
}
-static inline struct dummy *gadget_to_dummy (struct usb_gadget *gadget)
+static inline struct dummy_hcd *gadget_to_dummy_hcd(struct usb_gadget *gadget)
{
- return container_of (gadget, struct dummy, gadget);
+ struct dummy *dum = container_of(gadget, struct dummy, gadget);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ return dum->ss_hcd;
+ else
+ return dum->hs_hcd;
}
static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
@@ -219,7 +233,7 @@ static inline struct dummy *gadget_dev_to_dummy (struct device *dev)
return container_of (dev, struct dummy, gadget.dev);
}
-static struct dummy *the_controller;
+static struct dummy the_controller;
/*-------------------------------------------------------------------------*/
@@ -259,61 +273,141 @@ stop_activity (struct dummy *dum)
/* driver now does any non-usb quiescing necessary */
}
-/* caller must hold lock */
+/**
+ * set_ss_link_state() - Sets the current state of the SuperSpeed link
+ * @dum_hcd: pointer to the dummy_hcd structure to update the link
+ * state for
+ *
+ * This function updates the port_status according to the link
+ * state. The old status is saved befor updating.
+ * Note: this function should be called only for SuperSpeed
+ * master and the caller must hold the lock.
+ */
static void
-set_link_state (struct dummy *dum)
+set_ss_link_state(struct dummy_hcd *dum_hcd)
{
- dum->active = 0;
- if ((dum->port_status & USB_PORT_STAT_POWER) == 0)
- dum->port_status = 0;
+ struct dummy *dum = dum_hcd->dum;
+ dum_hcd->active = 0;
+ if ((dum_hcd->port_status & USB_SS_PORT_STAT_POWER) == 0)
+ dum_hcd->port_status = 0;
/* UDC suspend must cause a disconnect */
else if (!dum->pullup || dum->udc_suspended) {
- dum->port_status &= ~(USB_PORT_STAT_CONNECTION |
+ dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_ENABLE);
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ } else {
+ /* device is connected and not suspended */
+ dum_hcd->port_status |= (USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_SPEED_5GBPS) ;
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) == 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 1 &&
+ (dum_hcd->port_status & USB_SS_PORT_LS_U0) == 1 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+ dum_hcd->active = 1;
+ }
+
+
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
+ dum_hcd->active)
+ dum_hcd->resuming = 0;
+
+ /* if !connected or reset */
+ if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
+ (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
+ /*
+ * We're connected and not reseted (reset occured now),
+ * and driver attached - disconnect!
+ */
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
+ (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
+ dum->driver) {
+ stop_activity(dum);
+ spin_unlock(&dum->lock);
+ dum->driver->disconnect(&dum->gadget);
+ spin_lock(&dum->lock);
+ }
+ } else if (dum_hcd->active != dum_hcd->old_active) {
+ if (dum_hcd->old_active && dum->driver->suspend) {
+ spin_unlock(&dum->lock);
+ dum->driver->suspend(&dum->gadget);
+ spin_lock(&dum->lock);
+ } else if (!dum_hcd->old_active && dum->driver->resume) {
+ spin_unlock(&dum->lock);
+ dum->driver->resume(&dum->gadget);
+ spin_lock(&dum->lock);
+ }
+ }
+
+ dum_hcd->old_status = dum_hcd->port_status;
+ dum_hcd->old_active = dum_hcd->active;
+}
+
+/* caller must hold lock */
+static void set_link_state(struct dummy_hcd *dum_hcd)
+{
+ struct dummy *dum = dum_hcd->dum;
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ return;
+
+ dum_hcd->active = 0;
+ if ((dum_hcd->port_status & USB_PORT_STAT_POWER) == 0)
+ dum_hcd->port_status = 0;
+
+ /* UDC suspend must cause a disconnect */
+ else if (!dum->pullup || dum->udc_suspended) {
+ dum_hcd->port_status &= ~(USB_PORT_STAT_CONNECTION |
USB_PORT_STAT_ENABLE |
USB_PORT_STAT_LOW_SPEED |
USB_PORT_STAT_HIGH_SPEED |
USB_PORT_STAT_SUSPEND);
- if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0)
- dum->port_status |= (USB_PORT_STAT_C_CONNECTION << 16);
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
} else {
- dum->port_status |= USB_PORT_STAT_CONNECTION;
- if ((dum->old_status & USB_PORT_STAT_CONNECTION) == 0)
- dum->port_status |= (USB_PORT_STAT_C_CONNECTION << 16);
- if ((dum->port_status & USB_PORT_STAT_ENABLE) == 0)
- dum->port_status &= ~USB_PORT_STAT_SUSPEND;
- else if ((dum->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
- dum->rh_state != DUMMY_RH_SUSPENDED)
- dum->active = 1;
+ dum_hcd->port_status |= USB_PORT_STAT_CONNECTION;
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) == 0)
+ dum_hcd->port_status |=
+ (USB_PORT_STAT_C_CONNECTION << 16);
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0)
+ dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+ else if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
+ dum_hcd->active = 1;
}
- if ((dum->port_status & USB_PORT_STAT_ENABLE) == 0 || dum->active)
- dum->resuming = 0;
+ if ((dum_hcd->port_status & USB_PORT_STAT_ENABLE) == 0 ||
+ dum_hcd->active)
+ dum_hcd->resuming = 0;
- if ((dum->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
- (dum->port_status & USB_PORT_STAT_RESET) != 0) {
- if ((dum->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
- (dum->old_status & USB_PORT_STAT_RESET) == 0 &&
+ if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0 ||
+ (dum_hcd->port_status & USB_PORT_STAT_RESET) != 0) {
+ if ((dum_hcd->old_status & USB_PORT_STAT_CONNECTION) != 0 &&
+ (dum_hcd->old_status & USB_PORT_STAT_RESET) == 0 &&
dum->driver) {
stop_activity (dum);
spin_unlock (&dum->lock);
dum->driver->disconnect (&dum->gadget);
spin_lock (&dum->lock);
}
- } else if (dum->active != dum->old_active) {
- if (dum->old_active && dum->driver->suspend) {
+ } else if (dum_hcd->active != dum_hcd->old_active) {
+ if (dum_hcd->old_active && dum->driver->suspend) {
spin_unlock (&dum->lock);
dum->driver->suspend (&dum->gadget);
spin_lock (&dum->lock);
- } else if (!dum->old_active && dum->driver->resume) {
+ } else if (!dum_hcd->old_active && dum->driver->resume) {
spin_unlock (&dum->lock);
dum->driver->resume (&dum->gadget);
spin_lock (&dum->lock);
}
}
- dum->old_status = dum->port_status;
- dum->old_active = dum->active;
+ dum_hcd->old_status = dum_hcd->port_status;
+ dum_hcd->old_active = dum_hcd->active;
}
/*-------------------------------------------------------------------------*/
@@ -332,6 +426,7 @@ static int
dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
{
struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
struct dummy_ep *ep;
unsigned max;
int retval;
@@ -341,9 +436,21 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
|| desc->bDescriptorType != USB_DT_ENDPOINT)
return -EINVAL;
dum = ep_to_dummy (ep);
- if (!dum->driver || !is_enabled (dum))
+ if (!dum->driver)
return -ESHUTDOWN;
- max = le16_to_cpu(desc->wMaxPacketSize) & 0x3ff;
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ dum_hcd = dum->ss_hcd;
+ else
+ dum_hcd = dum->hs_hcd;
+ if (!is_enabled(dum_hcd))
+ return -ESHUTDOWN;
+
+ /*
+ * For HS/FS devices only bits 0..10 of the wMaxPacketSize represent the
+ * maximum packet size.
+ * For SS devices the wMaxPacketSize is limited by 1024.
+ */
+ max = le16_to_cpu(desc->wMaxPacketSize) & 0x7ff;
/* drivers must not request bad settings, since lower levels
* (hardware or its drivers) may not check. some endpoints
@@ -361,6 +468,10 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
}
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
+ if (max == 1024)
+ break;
+ goto done;
case USB_SPEED_HIGH:
if (max == 512)
break;
@@ -379,6 +490,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
if (max <= 1024)
break;
@@ -399,6 +511,7 @@ dummy_enable (struct usb_ep *_ep, const struct usb_endpoint_descriptor *desc)
goto done;
/* real hardware might not handle all packet sizes */
switch (dum->gadget.speed) {
+ case USB_SPEED_SUPER:
case USB_SPEED_HIGH:
if (max <= 1024)
break;
@@ -507,6 +620,7 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
struct dummy_ep *ep;
struct dummy_request *req;
struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
unsigned long flags;
req = usb_request_to_dummy_request (_req);
@@ -518,7 +632,11 @@ dummy_queue (struct usb_ep *_ep, struct usb_request *_req,
return -EINVAL;
dum = ep_to_dummy (ep);
- if (!dum->driver || !is_enabled (dum))
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ dum_hcd = dum->ss_hcd;
+ else
+ dum_hcd = dum->hs_hcd;
+ if (!dum->driver || !is_enabled(dum_hcd))
return -ESHUTDOWN;
#if 0
@@ -662,24 +780,24 @@ static int dummy_g_get_frame (struct usb_gadget *_gadget)
static int dummy_wakeup (struct usb_gadget *_gadget)
{
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
- dum = gadget_to_dummy (_gadget);
- if (!(dum->devstatus & ( (1 << USB_DEVICE_B_HNP_ENABLE)
+ dum_hcd = gadget_to_dummy_hcd(_gadget);
+ if (!(dum_hcd->dum->devstatus & ((1 << USB_DEVICE_B_HNP_ENABLE)
| (1 << USB_DEVICE_REMOTE_WAKEUP))))
return -EINVAL;
- if ((dum->port_status & USB_PORT_STAT_CONNECTION) == 0)
+ if ((dum_hcd->port_status & USB_PORT_STAT_CONNECTION) == 0)
return -ENOLINK;
- if ((dum->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
- dum->rh_state != DUMMY_RH_SUSPENDED)
+ if ((dum_hcd->port_status & USB_PORT_STAT_SUSPEND) == 0 &&
+ dum_hcd->rh_state != DUMMY_RH_SUSPENDED)
return -EIO;
/* FIXME: What if the root hub is suspended but the port isn't? */
/* hub notices our request, issues downstream resume, etc */
- dum->resuming = 1;
- dum->re_timeout = jiffies + msecs_to_jiffies(20);
- mod_timer (&dummy_to_hcd (dum)->rh_timer, dum->re_timeout);
+ dum_hcd->resuming = 1;
+ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(20);
+ mod_timer(&dum_hcd->hcd->rh_timer, dum_hcd->re_timeout);
return 0;
}
@@ -687,7 +805,7 @@ static int dummy_set_selfpowered (struct usb_gadget *_gadget, int value)
{
struct dummy *dum;
- dum = gadget_to_dummy (_gadget);
+ dum = (gadget_to_dummy_hcd(_gadget))->dum;
if (value)
dum->devstatus |= (1 << USB_DEVICE_SELF_POWERED);
else
@@ -700,13 +818,16 @@ static int dummy_pullup (struct usb_gadget *_gadget, int value)
struct dummy *dum;
unsigned long flags;
- dum = gadget_to_dummy (_gadget);
+ dum = gadget_to_dummy_hcd(_gadget)->dum;
spin_lock_irqsave (&dum->lock, flags);
dum->pullup = (value != 0);
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ set_ss_link_state(dum->ss_hcd);
+ else
+ set_link_state(dum->hs_hcd);
spin_unlock_irqrestore (&dum->lock, flags);
-
- usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd->hcd : dum->hs_hcd->hcd));
return 0;
}
@@ -751,7 +872,7 @@ int
usb_gadget_probe_driver(struct usb_gadget_driver *driver,
int (*bind)(struct usb_gadget *))
{
- struct dummy *dum = the_controller;
+ struct dummy *dum = &the_controller;
int retval, i;
if (!dum)
@@ -787,7 +908,13 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
}
dum->gadget.ep0 = &dum->ep [0].ep;
- dum->ep [0].ep.maxpacket = 64;
+ dum->gadget.speed = driver->speed;
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ for (i = 0; i < DUMMY_ENDPOINTS; i++)
+ dum->ep[i].ep.max_streams = 0x10;
+ dum->ep[0].ep.maxpacket = 9;
+ } else
+ dum->ep[0].ep.maxpacket = 64;
list_del_init (&dum->ep [0].ep.ep_list);
INIT_LIST_HEAD(&dum->fifo_req.queue);
@@ -806,10 +933,18 @@ usb_gadget_probe_driver(struct usb_gadget_driver *driver,
/* khubd will enumerate this in a while */
spin_lock_irq (&dum->lock);
dum->pullup = 1;
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ dum->gadget.is_otg = (dum->ss_hcd->hcd->self.otg_port != 0);
+ set_ss_link_state(dum->ss_hcd);
+ } else {
+ dum->gadget.is_otg = (dum->hs_hcd->hcd->self.otg_port != 0);
+ set_link_state(dum->hs_hcd);
+ }
+
spin_unlock_irq (&dum->lock);
- usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd->hcd : dum->hs_hcd->hcd));
return 0;
}
EXPORT_SYMBOL(usb_gadget_probe_driver);
@@ -817,7 +952,7 @@ EXPORT_SYMBOL(usb_gadget_probe_driver);
int
usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
{
- struct dummy *dum = the_controller;
+ struct dummy *dum = &the_controller;
unsigned long flags;
if (!dum)
@@ -830,19 +965,24 @@ usb_gadget_unregister_driver (struct usb_gadget_driver *driver)
spin_lock_irqsave (&dum->lock, flags);
dum->pullup = 0;
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ set_ss_link_state(dum->ss_hcd);
+ else
+ set_link_state(dum->hs_hcd);
spin_unlock_irqrestore (&dum->lock, flags);
driver->unbind (&dum->gadget);
dum->gadget.dev.driver = NULL;
dum->driver = NULL;
-
spin_lock_irqsave (&dum->lock, flags);
dum->pullup = 0;
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ set_ss_link_state(dum->ss_hcd);
+ else
+ set_link_state(dum->hs_hcd);
spin_unlock_irqrestore (&dum->lock, flags);
-
- usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd->hcd : dum->hs_hcd->hcd));
return 0;
}
EXPORT_SYMBOL (usb_gadget_unregister_driver);
@@ -864,25 +1004,18 @@ EXPORT_SYMBOL (net2280_set_fifo_mode);
static void
dummy_gadget_release (struct device *dev)
{
- struct dummy *dum = gadget_dev_to_dummy (dev);
-
- usb_put_hcd (dummy_to_hcd (dum));
+ return;
}
static int dummy_udc_probe (struct platform_device *pdev)
{
- struct dummy *dum = the_controller;
+ struct dummy *dum = &the_controller;
int rc;
- usb_get_hcd(dummy_to_hcd(dum));
-
dum->gadget.name = gadget_name;
dum->gadget.ops = &dummy_ops;
dum->gadget.is_dualspeed = 1;
- /* maybe claim OTG support, though we won't complete HNP */
- dum->gadget.is_otg = (dummy_to_hcd(dum)->self.otg_port != 0);
-
dev_set_name(&dum->gadget.dev, "gadget");
dum->gadget.dev.parent = &pdev->dev;
dum->gadget.dev.release = dummy_gadget_release;
@@ -917,10 +1050,14 @@ static int dummy_udc_suspend (struct platform_device *pdev, pm_message_t state)
dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 1;
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ set_ss_link_state(dum->ss_hcd);
+ else
+ set_link_state(dum->hs_hcd);
spin_unlock_irq (&dum->lock);
- usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd->hcd : dum->hs_hcd->hcd));
return 0;
}
@@ -931,10 +1068,14 @@ static int dummy_udc_resume (struct platform_device *pdev)
dev_dbg (&pdev->dev, "%s\n", __func__);
spin_lock_irq (&dum->lock);
dum->udc_suspended = 0;
- set_link_state (dum);
+ if (dum->gadget.speed == USB_SPEED_SUPER)
+ set_ss_link_state(dum->ss_hcd);
+ else
+ set_link_state(dum->hs_hcd);
spin_unlock_irq (&dum->lock);
- usb_hcd_poll_rh_status (dummy_to_hcd (dum));
+ usb_hcd_poll_rh_status((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd->hcd : dum->hs_hcd->hcd));
return 0;
}
@@ -968,7 +1109,7 @@ static int dummy_urb_enqueue (
struct urb *urb,
gfp_t mem_flags
) {
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
struct urbp *urbp;
unsigned long flags;
int rc;
@@ -981,51 +1122,51 @@ static int dummy_urb_enqueue (
return -ENOMEM;
urbp->urb = urb;
- dum = hcd_to_dummy (hcd);
- spin_lock_irqsave (&dum->lock, flags);
+ dum_hcd = hcd_to_dummy_hcd(hcd);
+ spin_lock_irqsave(&dum_hcd->dum->lock, flags);
rc = usb_hcd_link_urb_to_ep(hcd, urb);
if (rc) {
kfree(urbp);
goto done;
}
- if (!dum->udev) {
- dum->udev = urb->dev;
- usb_get_dev (dum->udev);
- } else if (unlikely (dum->udev != urb->dev))
- dev_err (dummy_dev(dum), "usb_device address has changed!\n");
+ if (!dum_hcd->udev) {
+ dum_hcd->udev = urb->dev;
+ usb_get_dev(dum_hcd->udev);
+ } else if (unlikely(dum_hcd->udev != urb->dev))
+ dev_err(dummy_dev(dum_hcd), "usb_device address has changed!\n");
- list_add_tail (&urbp->urbp_list, &dum->urbp_list);
+ list_add_tail(&urbp->urbp_list, &dum_hcd->urbp_list);
urb->hcpriv = urbp;
if (usb_pipetype (urb->pipe) == PIPE_CONTROL)
urb->error_count = 1; /* mark as a new urb */
/* kick the scheduler, it'll do the rest */
- if (!timer_pending (&dum->timer))
- mod_timer (&dum->timer, jiffies + 1);
+ if (!timer_pending(&dum_hcd->timer))
+ mod_timer(&dum_hcd->timer, jiffies + 1);
done:
- spin_unlock_irqrestore(&dum->lock, flags);
+ spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
return rc;
}
static int dummy_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
{
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
unsigned long flags;
int rc;
/* giveback happens automatically in timer callback,
* so make sure the callback happens */
- dum = hcd_to_dummy (hcd);
- spin_lock_irqsave (&dum->lock, flags);
+ dum_hcd = hcd_to_dummy_hcd(hcd);
+ spin_lock_irqsave(&dum_hcd->dum->lock, flags);
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
- if (!rc && dum->rh_state != DUMMY_RH_RUNNING &&
- !list_empty(&dum->urbp_list))
- mod_timer (&dum->timer, jiffies);
+ if (!rc && dum_hcd->rh_state != DUMMY_RH_RUNNING &&
+ !list_empty(&dum_hcd->urbp_list))
+ mod_timer(&dum_hcd->timer, jiffies);
- spin_unlock_irqrestore (&dum->lock, flags);
+ spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
return rc;
}
@@ -1162,10 +1303,25 @@ static int periodic_bytes (struct dummy *dum, struct dummy_ep *ep)
tmp *= 8 /* applies to entire frame */;
limit += limit * tmp;
}
+ if (dum->gadget.speed == USB_SPEED_SUPER) {
+ switch (ep->desc->bmAttributes & 0x03) {
+ case USB_ENDPOINT_XFER_ISOC:
+ /* Sec. 4.4.8.2 USB3.0 Spec */
+ limit = 3 * 16 * 1024 * 8;
+ break;
+ case USB_ENDPOINT_XFER_INT:
+ /* Sec. 4.4.7.2 USB3.0 Spec */
+ limit = 3 * 1024 * 8;
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ default:
+ break;
+ }
+ }
return limit;
}
-#define is_active(dum) ((dum->port_status & \
+#define is_active(dum_hcd) ((dum_hcd->port_status & \
(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE | \
USB_PORT_STAT_SUSPEND)) \
== (USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE))
@@ -1174,7 +1330,8 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
{
int i;
- if (!is_active (dum))
+ if (!is_active((dum->gadget.speed == USB_SPEED_SUPER ?
+ dum->ss_hcd : dum->hs_hcd)))
return NULL;
if ((address & ~USB_DIR_IN) == 0)
return &dum->ep [0];
@@ -1211,11 +1368,12 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address)
* 1 - if the request wasn't handles
* error code on error
*/
-static int handle_control_request(struct dummy *dum, struct urb *urb,
+static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb,
struct usb_ctrlrequest *setup,
int *status)
{
struct dummy_ep *ep2;
+ struct dummy *dum = dum_hcd->dum;
int ret_val = 1;
unsigned w_index;
unsigned w_value;
@@ -1247,6 +1405,24 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
case USB_DEVICE_A_ALT_HNP_SUPPORT:
dum->gadget.a_alt_hnp_support = 1;
break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
default:
ret_val = -EOPNOTSUPP;
}
@@ -1273,6 +1449,24 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
case USB_DEVICE_REMOTE_WAKEUP:
w_value = USB_DEVICE_REMOTE_WAKEUP;
break;
+ case USB_DEVICE_U1_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_U1_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_U2_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_U2_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
+ case USB_DEVICE_LTM_ENABLE:
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ w_value = USB_DEV_STAT_LTM_ENABLED;
+ else
+ ret_val = -EOPNOTSUPP;
+ break;
default:
ret_val = -EOPNOTSUPP;
break;
@@ -1334,9 +1528,10 @@ static int handle_control_request(struct dummy *dum, struct urb *urb,
/* drive both sides of the transfers; looks like irq handlers to
* both drivers except the callbacks aren't in_irq().
*/
-static void dummy_timer (unsigned long _dum)
+static void dummy_timer(unsigned long _dum_hcd)
{
- struct dummy *dum = (struct dummy *) _dum;
+ struct dummy_hcd *dum_hcd = (struct dummy_hcd *) _dum_hcd;
+ struct dummy *dum = dum_hcd->dum;
struct urbp *urbp, *tmp;
unsigned long flags;
int limit, total;
@@ -1353,8 +1548,12 @@ static void dummy_timer (unsigned long _dum)
case USB_SPEED_HIGH:
total = 512/*bytes*/ * 13/*packets*/ * 8/*uframes*/;
break;
+ case USB_SPEED_SUPER:
+ /* Bus speed is 500000 bytes/ms, so use a little less */
+ total = 490000;
+ break;
default:
- dev_err (dummy_dev(dum), "bogus device speed\n");
+ dev_err(dummy_dev(dum_hcd), "bogus device speed\n");
return;
}
@@ -1363,8 +1562,8 @@ static void dummy_timer (unsigned long _dum)
/* look at each urb queued by the host side driver */
spin_lock_irqsave (&dum->lock, flags);
- if (!dum->udev) {
- dev_err (dummy_dev(dum),
+ if (!dum_hcd->udev) {
+ dev_err(dummy_dev(dum_hcd),
"timer fired with no URBs pending?\n");
spin_unlock_irqrestore (&dum->lock, flags);
return;
@@ -1377,7 +1576,7 @@ static void dummy_timer (unsigned long _dum)
}
restart:
- list_for_each_entry_safe (urbp, tmp, &dum->urbp_list, urbp_list) {
+ list_for_each_entry_safe(urbp, tmp, &dum_hcd->urbp_list, urbp_list) {
struct urb *urb;
struct dummy_request *req;
u8 address;
@@ -1388,7 +1587,7 @@ restart:
urb = urbp->urb;
if (urb->unlinked)
goto return_urb;
- else if (dum->rh_state != DUMMY_RH_RUNNING)
+ else if (dum_hcd->rh_state != DUMMY_RH_RUNNING)
continue;
type = usb_pipetype (urb->pipe);
@@ -1406,7 +1605,7 @@ restart:
ep = find_endpoint(dum, address);
if (!ep) {
/* set_configuration() disagreement */
- dev_dbg (dummy_dev(dum),
+ dev_dbg(dummy_dev(dum_hcd),
"no ep configured for urb %p\n",
urb);
status = -EPROTO;
@@ -1422,7 +1621,7 @@ restart:
}
if (ep->halted && !ep->setup_stage) {
/* NOTE: must not be iso! */
- dev_dbg (dummy_dev(dum), "ep %s halted, urb %p\n",
+ dev_dbg(dummy_dev(dum_hcd), "ep %s halted, urb %p\n",
ep->ep.name, urb);
status = -EPIPE;
goto return_urb;
@@ -1457,7 +1656,7 @@ restart:
ep->setup_stage = 0;
ep->halted = 0;
- value = handle_control_request(dum, urb, &setup,
+ value = handle_control_request(dum_hcd, urb, &setup,
&status);
/* gadget driver handles all other requests. block
@@ -1527,20 +1726,20 @@ return_urb:
if (ep)
ep->already_seen = ep->setup_stage = 0;
- usb_hcd_unlink_urb_from_ep(dummy_to_hcd(dum), urb);
+ usb_hcd_unlink_urb_from_ep(dum_hcd->hcd, urb);
spin_unlock (&dum->lock);
- usb_hcd_giveback_urb(dummy_to_hcd(dum), urb, status);
+ usb_hcd_giveback_urb(dum_hcd->hcd, urb, status);
spin_lock (&dum->lock);
goto restart;
}
- if (list_empty (&dum->urbp_list)) {
- usb_put_dev (dum->udev);
- dum->udev = NULL;
- } else if (dum->rh_state == DUMMY_RH_RUNNING) {
+ if (list_empty(&dum_hcd->urbp_list)) {
+ usb_put_dev(dum_hcd->udev);
+ dum_hcd->udev = NULL;
+ } else if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
/* want a 1 msec delay here */
- mod_timer (&dum->timer, jiffies + msecs_to_jiffies(1));
+ mod_timer(&dum_hcd->timer, jiffies + msecs_to_jiffies(1));
}
spin_unlock_irqrestore (&dum->lock, flags);
@@ -1557,36 +1756,51 @@ return_urb:
static int dummy_hub_status (struct usb_hcd *hcd, char *buf)
{
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
unsigned long flags;
int retval = 0;
- dum = hcd_to_dummy (hcd);
+ dum_hcd = hcd_to_dummy_hcd(hcd);
- spin_lock_irqsave (&dum->lock, flags);
+ spin_lock_irqsave(&dum_hcd->dum->lock, flags);
if (!HCD_HW_ACCESSIBLE(hcd))
goto done;
- if (dum->resuming && time_after_eq (jiffies, dum->re_timeout)) {
- dum->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
- dum->port_status &= ~USB_PORT_STAT_SUSPEND;
- set_link_state (dum);
+ if (dum_hcd->resuming && time_after_eq(jiffies, dum_hcd->re_timeout)) {
+ dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+ dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
+ if (dum_hcd->hcd->speed == HCD_USB3)
+ set_ss_link_state(dum_hcd);
+ else
+ set_link_state(dum_hcd);
}
- if ((dum->port_status & PORT_C_MASK) != 0) {
+ if ((dum_hcd->port_status & PORT_C_MASK) != 0) {
*buf = (1 << 1);
- dev_dbg (dummy_dev(dum), "port status 0x%08x has changes\n",
- dum->port_status);
+ dev_dbg(dummy_dev(dum_hcd), "port status 0x%08x has changes\n",
+ dum_hcd->port_status);
retval = 1;
- if (dum->rh_state == DUMMY_RH_SUSPENDED)
+ if (dum_hcd->rh_state == DUMMY_RH_SUSPENDED)
usb_hcd_resume_root_hub (hcd);
}
done:
- spin_unlock_irqrestore (&dum->lock, flags);
+ spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
return retval;
}
static inline void
+ss_hub_descriptor(struct usb_hub_descriptor *desc)
+{
+ memset(desc, 0, sizeof *desc);
+ desc->bDescriptorType = 0x2a;
+ desc->bDescLength = 12;
+ desc->wHubCharacteristics = cpu_to_le16(0x0001);
+ desc->bNbrPorts = 1;
+ desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
+ desc->u.ss.DeviceRemovable = 0xffff;
+}
+
+static inline void
hub_descriptor (struct usb_hub_descriptor *desc)
{
memset (desc, 0, sizeof *desc);
@@ -1606,39 +1820,67 @@ static int dummy_hub_control (
char *buf,
u16 wLength
) {
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
int retval = 0;
unsigned long flags;
if (!HCD_HW_ACCESSIBLE(hcd))
return -ETIMEDOUT;
- dum = hcd_to_dummy (hcd);
- spin_lock_irqsave (&dum->lock, flags);
+ dum_hcd = hcd_to_dummy_hcd(hcd);
+
+ spin_lock_irqsave(&dum_hcd->dum->lock, flags);
switch (typeReq) {
case ClearHubFeature:
break;
case ClearPortFeature:
switch (wValue) {
case USB_PORT_FEAT_SUSPEND:
- if (dum->port_status & USB_PORT_STAT_SUSPEND) {
+ if (hcd->speed == HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+ if (dum_hcd->port_status & USB_PORT_STAT_SUSPEND) {
/* 20msec resume signaling */
- dum->resuming = 1;
- dum->re_timeout = jiffies +
+ dum_hcd->resuming = 1;
+ dum_hcd->re_timeout = jiffies +
msecs_to_jiffies(20);
}
break;
case USB_PORT_FEAT_POWER:
- if (dum->port_status & USB_PORT_STAT_POWER)
- dev_dbg (dummy_dev(dum), "power-off\n");
+ if (hcd->speed == HCD_USB3) {
+ if (dum_hcd->port_status & USB_PORT_STAT_POWER)
+ dev_dbg(dummy_dev(dum_hcd),
+ "power-off\n");
+ } else
+ if (dum_hcd->port_status &
+ USB_SS_PORT_STAT_POWER)
+ dev_dbg(dummy_dev(dum_hcd),
+ "power-off\n");
/* FALLS THROUGH */
default:
- dum->port_status &= ~(1 << wValue);
- set_link_state (dum);
+ dum_hcd->port_status &= ~(1 << wValue);
+ if (hcd->speed == HCD_USB3)
+ set_ss_link_state(dum_hcd);
+ else
+ set_link_state(dum_hcd);
}
break;
case GetHubDescriptor:
- hub_descriptor ((struct usb_hub_descriptor *) buf);
+ if (hcd->speed == HCD_USB3 &&
+ (wLength < USB_DT_SS_HUB_SIZE ||
+ wValue != (USB_DT_SS_HUB << 8))) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "Wrong hub descriptor type for "
+ "USB 3.0 roothub.\n");
+ goto error;
+ }
+ if (hcd->speed == HCD_USB3)
+ ss_hub_descriptor((struct usb_hub_descriptor *) buf);
+ else
+ hub_descriptor((struct usb_hub_descriptor *) buf);
break;
case GetHubStatus:
*(__le32 *) buf = cpu_to_le32 (0);
@@ -1650,127 +1892,221 @@ static int dummy_hub_control (
/* whoever resets or resumes must GetPortStatus to
* complete it!!
*/
- if (dum->resuming &&
- time_after_eq (jiffies, dum->re_timeout)) {
- dum->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
- dum->port_status &= ~USB_PORT_STAT_SUSPEND;
+ if (dum_hcd->resuming &&
+ time_after_eq(jiffies, dum_hcd->re_timeout)) {
+ dum_hcd->port_status |= (USB_PORT_STAT_C_SUSPEND << 16);
+ dum_hcd->port_status &= ~USB_PORT_STAT_SUSPEND;
}
- if ((dum->port_status & USB_PORT_STAT_RESET) != 0 &&
- time_after_eq (jiffies, dum->re_timeout)) {
- dum->port_status |= (USB_PORT_STAT_C_RESET << 16);
- dum->port_status &= ~USB_PORT_STAT_RESET;
- if (dum->pullup) {
- dum->port_status |= USB_PORT_STAT_ENABLE;
- /* give it the best speed we agree on */
- dum->gadget.speed = dum->driver->speed;
- dum->gadget.ep0->maxpacket = 64;
- switch (dum->gadget.speed) {
- case USB_SPEED_HIGH:
- dum->port_status |=
- USB_PORT_STAT_HIGH_SPEED;
- break;
- case USB_SPEED_LOW:
- dum->gadget.ep0->maxpacket = 8;
- dum->port_status |=
- USB_PORT_STAT_LOW_SPEED;
- break;
- default:
- dum->gadget.speed = USB_SPEED_FULL;
- break;
+ if ((dum_hcd->port_status & USB_PORT_STAT_RESET) != 0 &&
+ time_after_eq(jiffies, dum_hcd->re_timeout)) {
+ dum_hcd->port_status |= (USB_PORT_STAT_C_RESET << 16);
+ dum_hcd->port_status &= ~USB_PORT_STAT_RESET;
+ if (dum_hcd->dum->pullup) {
+ dum_hcd->port_status |= USB_PORT_STAT_ENABLE;
+
+ if (hcd->speed < HCD_USB3) {
+ switch (dum_hcd->dum->gadget.speed) {
+ case USB_SPEED_HIGH:
+ dum_hcd->port_status |=
+ USB_PORT_STAT_HIGH_SPEED;
+ break;
+ case USB_SPEED_LOW:
+ dum_hcd->dum->gadget.ep0->
+ maxpacket = 8;
+ dum_hcd->port_status |=
+ USB_PORT_STAT_LOW_SPEED;
+ break;
+ default:
+ dum_hcd->dum->gadget.speed =
+ USB_SPEED_FULL;
+ break;
+ }
}
}
}
- set_link_state (dum);
- ((__le16 *) buf)[0] = cpu_to_le16 (dum->port_status);
- ((__le16 *) buf)[1] = cpu_to_le16 (dum->port_status >> 16);
+ if (hcd->speed == HCD_USB3)
+ set_ss_link_state(dum_hcd);
+ else
+ set_link_state(dum_hcd);
+ ((__le16 *) buf)[0] = cpu_to_le16 (dum_hcd->port_status);
+ ((__le16 *) buf)[1] = cpu_to_le16 (dum_hcd->port_status >> 16);
break;
case SetHubFeature:
retval = -EPIPE;
break;
case SetPortFeature:
switch (wValue) {
+ case USB_PORT_FEAT_LINK_STATE:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_LINK_STATE req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /*
+ * Since this is dummy we don't have an actual link so
+ * there is nothing to do for the SET_LINK_STATE cmd
+ */
+ break;
+ case USB_PORT_FEAT_U1_TIMEOUT:
+ case USB_PORT_FEAT_U2_TIMEOUT:
+ /* TODO: add suspend/resume support! */
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_U1/2_TIMEOUT req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ break;
case USB_PORT_FEAT_SUSPEND:
- if (dum->active) {
- dum->port_status |= USB_PORT_STAT_SUSPEND;
+ /* Applicable only for USB2.0 hub */
+ if (hcd->speed == HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_SUSPEND req not "
+ "supported for USB 3.0 roothub\n");
+ goto error;
+ }
+ if (dum_hcd->active) {
+ dum_hcd->port_status |= USB_PORT_STAT_SUSPEND;
/* HNP would happen here; for now we
* assume b_bus_req is always true.
*/
- set_link_state (dum);
+ set_link_state(dum_hcd);
if (((1 << USB_DEVICE_B_HNP_ENABLE)
- & dum->devstatus) != 0)
- dev_dbg (dummy_dev(dum),
+ & dum_hcd->dum->devstatus) != 0)
+ dev_dbg(dummy_dev(dum_hcd),
"no HNP yet!\n");
}
break;
case USB_PORT_FEAT_POWER:
- dum->port_status |= USB_PORT_STAT_POWER;
- set_link_state (dum);
+ if (hcd->speed == HCD_USB3) {
+ dum_hcd->port_status |= USB_SS_PORT_STAT_POWER;
+ set_ss_link_state(dum_hcd);
+ } else {
+ dum_hcd->port_status |= USB_PORT_STAT_POWER;
+ set_link_state(dum_hcd);
+ }
break;
+ case USB_PORT_FEAT_BH_PORT_RESET:
+ /* Applicable only for USB3.0 hub */
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "USB_PORT_FEAT_BH_PORT_RESET req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* FALLS THROUGH */
case USB_PORT_FEAT_RESET:
/* if it's already enabled, disable */
- dum->port_status &= ~(USB_PORT_STAT_ENABLE
+ if (hcd->speed == HCD_USB3) {
+ dum_hcd->port_status = 0;
+ dum_hcd->port_status =
+ (USB_SS_PORT_STAT_POWER |
+ USB_PORT_STAT_CONNECTION |
+ USB_PORT_STAT_RESET);
+ } else
+ dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE
| USB_PORT_STAT_LOW_SPEED
| USB_PORT_STAT_HIGH_SPEED);
- dum->devstatus = 0;
- /* 50msec reset signaling */
- dum->re_timeout = jiffies + msecs_to_jiffies(50);
+ /*
+ * We want to reset device status. All but the
+ * Self powered feature
+ */
+ dum_hcd->dum->devstatus &=
+ (1 << USB_DEVICE_SELF_POWERED);
+ /*
+ * FIXME USB3.0: what is the correct reset signaling
+ * interval? Is it still 50msec as for HS?
+ */
+ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50);
/* FALLS THROUGH */
default:
- if ((dum->port_status & USB_PORT_STAT_POWER) != 0) {
- dum->port_status |= (1 << wValue);
- set_link_state (dum);
- }
+ if (hcd->speed == HCD_USB3) {
+ if ((dum_hcd->port_status &
+ USB_SS_PORT_STAT_POWER) != 0) {
+ dum_hcd->port_status |= (1 << wValue);
+ set_ss_link_state(dum_hcd);
+ }
+ } else
+ if ((dum_hcd->port_status &
+ USB_PORT_STAT_POWER) != 0) {
+ dum_hcd->port_status |= (1 << wValue);
+ set_link_state(dum_hcd);
+ }
+ }
+ break;
+ case GetPortErrorCount:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "GetPortErrorCount req not "
+ "supported for USB 2.0 roothub\n");
+ goto error;
+ }
+ /* We'll always return 0 since this is a dummy hub */
+ *(__le32 *) buf = cpu_to_le32(0);
+ break;
+ case SetHubDepth:
+ if (hcd->speed != HCD_USB3) {
+ dev_dbg(dummy_dev(dum_hcd),
+ "SetHubDepth req not supported for "
+ "USB 2.0 roothub\n");
+ goto error;
}
break;
-
default:
- dev_dbg (dummy_dev(dum),
+ dev_dbg(dummy_dev(dum_hcd),
"hub control req%04x v%04x i%04x l%d\n",
typeReq, wValue, wIndex, wLength);
-
+error:
/* "protocol stall" on error */
retval = -EPIPE;
}
- spin_unlock_irqrestore (&dum->lock, flags);
+ spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
- if ((dum->port_status & PORT_C_MASK) != 0)
+ if ((dum_hcd->port_status & PORT_C_MASK) != 0)
usb_hcd_poll_rh_status (hcd);
return retval;
}
static int dummy_bus_suspend (struct usb_hcd *hcd)
{
- struct dummy *dum = hcd_to_dummy (hcd);
+ struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
- spin_lock_irq (&dum->lock);
- dum->rh_state = DUMMY_RH_SUSPENDED;
- set_link_state (dum);
+ spin_lock_irq(&dum_hcd->dum->lock);
+ dum_hcd->rh_state = DUMMY_RH_SUSPENDED;
+ if (hcd->speed == HCD_USB3)
+ set_ss_link_state(dum_hcd);
+ else
+ set_link_state(dum_hcd);
hcd->state = HC_STATE_SUSPENDED;
- spin_unlock_irq (&dum->lock);
+ spin_unlock_irq(&dum_hcd->dum->lock);
return 0;
}
static int dummy_bus_resume (struct usb_hcd *hcd)
{
- struct dummy *dum = hcd_to_dummy (hcd);
+ struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
int rc = 0;
dev_dbg (&hcd->self.root_hub->dev, "%s\n", __func__);
- spin_lock_irq (&dum->lock);
+ spin_lock_irq(&dum_hcd->dum->lock);
if (!HCD_HW_ACCESSIBLE(hcd)) {
rc = -ESHUTDOWN;
} else {
- dum->rh_state = DUMMY_RH_RUNNING;
- set_link_state (dum);
- if (!list_empty(&dum->urbp_list))
- mod_timer (&dum->timer, jiffies);
+ dum_hcd->rh_state = DUMMY_RH_RUNNING;
+ if (hcd->speed == HCD_USB3)
+ set_ss_link_state(dum_hcd);
+ else
+ set_link_state(dum_hcd);
+ if (!list_empty(&dum_hcd->urbp_list))
+ mod_timer(&dum_hcd->timer, jiffies);
hcd->state = HC_STATE_RUNNING;
}
- spin_unlock_irq (&dum->lock);
+ spin_unlock_irq(&dum_hcd->dum->lock);
return rc;
}
@@ -1789,6 +2125,9 @@ show_urb (char *buf, size_t size, struct urb *urb)
case USB_SPEED_LOW: s = "ls"; break;
case USB_SPEED_FULL: s = "fs"; break;
case USB_SPEED_HIGH: s = "hs"; break;
+ case USB_SPEED_SUPER:
+ s = "ss";
+ break;
default: s = "?"; break;
}; s; }),
ep, ep ? (usb_pipein (urb->pipe) ? "in" : "out") : "",
@@ -1806,43 +2145,64 @@ static ssize_t
show_urbs (struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_hcd *hcd = dev_get_drvdata (dev);
- struct dummy *dum = hcd_to_dummy (hcd);
+ struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
struct urbp *urbp;
size_t size = 0;
unsigned long flags;
- spin_lock_irqsave (&dum->lock, flags);
- list_for_each_entry (urbp, &dum->urbp_list, urbp_list) {
+ spin_lock_irqsave(&dum_hcd->dum->lock, flags);
+ list_for_each_entry(urbp, &dum_hcd->urbp_list, urbp_list) {
size_t temp;
temp = show_urb (buf, PAGE_SIZE - size, urbp->urb);
buf += temp;
size += temp;
}
- spin_unlock_irqrestore (&dum->lock, flags);
+ spin_unlock_irqrestore(&dum_hcd->dum->lock, flags);
return size;
}
static DEVICE_ATTR (urbs, S_IRUGO, show_urbs, NULL);
-static int dummy_start (struct usb_hcd *hcd)
+static int dummy_start_ss(struct dummy_hcd *dum_hcd)
{
- struct dummy *dum;
+ init_timer(&dum_hcd->timer);
+ dum_hcd->timer.function = dummy_timer;
+ dum_hcd->timer.data = (unsigned long)dum_hcd;
+ dum_hcd->rh_state = DUMMY_RH_RUNNING;
+ INIT_LIST_HEAD(&dum_hcd->urbp_list);
+ dum_hcd->hcd->power_budget = POWER_BUDGET;
+ dum_hcd->hcd->state = HC_STATE_RUNNING;
+ dum_hcd->hcd->uses_new_polling = 1;
+#ifdef CONFIG_USB_OTG
+ dum_hcd->hcd->self.otg_port = 1;
+#endif
+ return 0;
- dum = hcd_to_dummy (hcd);
+ /* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
+ return device_create_file(dum_hcd->hcd->self.controller,
+ &dev_attr_urbs);
+}
+
+static int dummy_start(struct usb_hcd *hcd)
+{
+ struct dummy_hcd *dum_hcd = hcd_to_dummy_hcd(hcd);
/*
* MASTER side init ... we emulate a root hub that'll only ever
* talk to one device (the slave side). Also appears in sysfs,
* just like more familiar pci-based HCDs.
*/
- spin_lock_init (&dum->lock);
- init_timer (&dum->timer);
- dum->timer.function = dummy_timer;
- dum->timer.data = (unsigned long) dum;
- dum->rh_state = DUMMY_RH_RUNNING;
+ if (!usb_hcd_is_primary_hcd(hcd))
+ return dummy_start_ss(dum_hcd);
+
+ spin_lock_init(&dum_hcd->dum->lock);
+ init_timer(&dum_hcd->timer);
+ dum_hcd->timer.function = dummy_timer;
+ dum_hcd->timer.data = (unsigned long)dum_hcd;
+ dum_hcd->rh_state = DUMMY_RH_RUNNING;
- INIT_LIST_HEAD (&dum->urbp_list);
+ INIT_LIST_HEAD(&dum_hcd->urbp_list);
hcd->power_budget = POWER_BUDGET;
hcd->state = HC_STATE_RUNNING;
@@ -1853,18 +2213,17 @@ static int dummy_start (struct usb_hcd *hcd)
#endif
/* FIXME 'urbs' should be a per-device thing, maybe in usbcore */
- return device_create_file (dummy_dev(dum), &dev_attr_urbs);
+ return device_create_file(hcd->self.controller, &dev_attr_urbs);
}
static void dummy_stop (struct usb_hcd *hcd)
{
struct dummy *dum;
- dum = hcd_to_dummy (hcd);
-
- device_remove_file (dummy_dev(dum), &dev_attr_urbs);
+ dum = (hcd_to_dummy_hcd(hcd))->dum;
+ device_remove_file(hcd->self.controller, &dev_attr_urbs);
usb_gadget_unregister_driver (dum->driver);
- dev_info (dummy_dev(dum), "stopped\n");
+ dev_info(hcd->self.controller, "stopped\n");
}
/*-------------------------------------------------------------------------*/
@@ -1874,13 +2233,61 @@ static int dummy_h_get_frame (struct usb_hcd *hcd)
return dummy_g_get_frame (NULL);
}
+static int dummy_setup(struct usb_hcd *hcd)
+{
+ if (usb_hcd_is_primary_hcd(hcd)) {
+ the_controller.hs_hcd = hcd_to_dummy_hcd(hcd);
+ the_controller.hs_hcd->hcd = hcd;
+ the_controller.hs_hcd->dum = &the_controller;
+ /*
+ * Mark the first roothub as being USB 2.0.
+ * The USB 3.0 roothub will be registered later by
+ * dummy_hcd_probe()
+ */
+ hcd->speed = HCD_USB2;
+ hcd->self.root_hub->speed = USB_SPEED_HIGH;
+ } else {
+ the_controller.ss_hcd = hcd_to_dummy_hcd(hcd);
+ the_controller.ss_hcd->hcd = hcd;
+ the_controller.ss_hcd->dum = &the_controller;
+ hcd->speed = HCD_USB3;
+ hcd->self.root_hub->speed = USB_SPEED_SUPER;
+ }
+ return 0;
+}
+
+/* Change a group of bulk endpoints to support multiple stream IDs */
+int dummy_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ unsigned int num_streams, gfp_t mem_flags)
+{
+ if (hcd->speed != HCD_USB3)
+ dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+ "%s() - ERROR! Not supported for USB2.0 roothub\n",
+ __func__);
+ return 0;
+}
+
+/* Reverts a group of bulk endpoints back to not using stream IDs. */
+int dummy_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
+ struct usb_host_endpoint **eps, unsigned int num_eps,
+ gfp_t mem_flags)
+{
+ if (hcd->speed != HCD_USB3)
+ dev_dbg(dummy_dev(hcd_to_dummy_hcd(hcd)),
+ "%s() - ERROR! Not supported for USB2.0 roothub\n",
+ __func__);
+ return 0;
+}
+
static const struct hc_driver dummy_hcd = {
.description = (char *) driver_name,
.product_desc = "Dummy host controller",
- .hcd_priv_size = sizeof(struct dummy),
+ .hcd_priv_size = sizeof(struct dummy_hcd),
- .flags = HCD_USB2,
+ .flags = HCD_USB3 | HCD_SHARED,
+ .reset = dummy_setup,
.start = dummy_start,
.stop = dummy_stop,
@@ -1893,50 +2300,77 @@ static const struct hc_driver dummy_hcd = {
.hub_control = dummy_hub_control,
.bus_suspend = dummy_bus_suspend,
.bus_resume = dummy_bus_resume,
+
+ .alloc_streams = dummy_alloc_streams,
+ .free_streams = dummy_free_streams,
};
static int dummy_hcd_probe(struct platform_device *pdev)
{
- struct usb_hcd *hcd;
+ struct usb_hcd *hs_hcd;
+ struct usb_hcd *ss_hcd;
int retval;
dev_info(&pdev->dev, "%s, driver " DRIVER_VERSION "\n", driver_desc);
- hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
- if (!hcd)
+ hs_hcd = usb_create_hcd(&dummy_hcd, &pdev->dev, dev_name(&pdev->dev));
+ if (!hs_hcd)
return -ENOMEM;
- the_controller = hcd_to_dummy (hcd);
- retval = usb_add_hcd(hcd, 0, 0);
- if (retval != 0) {
- usb_put_hcd (hcd);
- the_controller = NULL;
+ hs_hcd->speed = HCD_USB2;
+
+ retval = usb_add_hcd(hs_hcd, 0, IRQF_DISABLED | IRQF_SHARED);
+ if (retval != 0)
+ usb_put_hcd(hs_hcd);
+ dev_set_drvdata(&pdev->dev, hs_hcd);
+
+ ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev,
+ dev_name(&pdev->dev), hs_hcd);
+ if (!ss_hcd) {
+ retval = -ENOMEM;
+ goto dealloc_usb2_hcd;
}
+
+ retval = usb_add_hcd(ss_hcd, 0, IRQF_DISABLED | IRQF_SHARED);
+ if (retval)
+ goto put_usb3_hcd;
+
+ return 0;
+
+put_usb3_hcd:
+ usb_put_hcd(ss_hcd);
+dealloc_usb2_hcd:
+ usb_put_hcd(hs_hcd);
+ the_controller.hs_hcd = the_controller.ss_hcd = NULL;
return retval;
}
static int dummy_hcd_remove (struct platform_device *pdev)
{
- struct usb_hcd *hcd;
+ struct dummy *dum;
- hcd = platform_get_drvdata (pdev);
- usb_remove_hcd (hcd);
- usb_put_hcd (hcd);
- the_controller = NULL;
+ dum = (hcd_to_dummy_hcd(platform_get_drvdata(pdev)))->dum;
+ if (dum->ss_hcd) {
+ usb_remove_hcd(dum->ss_hcd->hcd);
+ usb_put_hcd(dum->ss_hcd->hcd);
+ }
+ usb_remove_hcd(dum->hs_hcd->hcd);
+ usb_put_hcd(dum->hs_hcd->hcd);
+ the_controller.ss_hcd = the_controller.hs_hcd = NULL;
return 0;
}
static int dummy_hcd_suspend (struct platform_device *pdev, pm_message_t state)
{
struct usb_hcd *hcd;
- struct dummy *dum;
+ struct dummy_hcd *dum_hcd;
int rc = 0;
dev_dbg (&pdev->dev, "%s\n", __func__);
hcd = platform_get_drvdata (pdev);
- dum = hcd_to_dummy (hcd);
- if (dum->rh_state == DUMMY_RH_RUNNING) {
+ dum_hcd = hcd_to_dummy_hcd(hcd);
+ if (dum_hcd->rh_state == DUMMY_RH_RUNNING) {
dev_warn(&pdev->dev, "Root hub isn't suspended!\n");
rc = -EBUSY;
} else
@@ -1996,7 +2430,7 @@ static int __init init (void)
retval = platform_device_add(the_hcd_pdev);
if (retval < 0)
goto err_add_hcd;
- if (!the_controller) {
+ if (!the_controller.hs_hcd || !the_controller.ss_hcd) {
/*
* The hcd was added successfully but its probe function failed
* for some reason.
--
1.7.3.3
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
