This patch fixes a problem where data received from the gps is sometimes transferred incompletely to the serial port. If used in native mode now all data received via the bulk queue will be forwarded to the serial port. Signed-off-by: Hermann Kneissel <herkne@xxxxxx> --- linux-2.6.39-rc4/drivers/usb/serial/garmin_gps.c.orig 2011-04-06 23:28:11.317423071 +0200 +++ linux-2.6.39-rc4/drivers/usb/serial/garmin_gps.c 2011-04-06 23:40:23.153423141 +0200 @@ -1,7 +1,7 @@ /* * Garmin GPS driver * - * Copyright (C) 2006-2009 Hermann Kneissel herkne@xxxxxxxxxxxxxxxxxxxxx + * Copyright (C) 2006-2011 Hermann Kneissel herkne@xxxxxx * * The latest version of the driver can be found at * http://sourceforge.net/projects/garmin-gps/ @@ -51,7 +51,7 @@ static int debug; */ #define VERSION_MAJOR 0 -#define VERSION_MINOR 33 +#define VERSION_MINOR 36 #define _STR(s) #s #define _DRIVER_VERSION(a, b) "v" _STR(a) "." _STR(b) @@ -410,6 +410,7 @@ static int gsp_send_ack(struct garmin_da */ static int gsp_rec_packet(struct garmin_data *garmin_data_p, int count) { + unsigned long flags; const __u8 *recpkt = garmin_data_p->inbuffer+GSP_INITIAL_OFFSET; __le32 *usbdata = (__le32 *) garmin_data_p->inbuffer; @@ -458,7 +459,9 @@ static int gsp_rec_packet(struct garmin_ /* if this was an abort-transfer command, flush all queued data. */ if (isAbortTrfCmnd(garmin_data_p->inbuffer)) { + spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= FLAGS_DROP_DATA; + spin_unlock_irqrestore(&garmin_data_p->lock, flags); pkt_clear(garmin_data_p); } @@ -943,7 +946,7 @@ static int garmin_open(struct tty_struct spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->mode = initial_mode; garmin_data_p->count = 0; - garmin_data_p->flags = 0; + garmin_data_p->flags &= FLAGS_SESSION_REPLY1_SEEN; spin_unlock_irqrestore(&garmin_data_p->lock, flags); /* shutdown any bulk reads that might be going on */ @@ -1178,7 +1181,8 @@ static int garmin_write_room(struct tty_ static void garmin_read_process(struct garmin_data *garmin_data_p, - unsigned char *data, unsigned data_length) + unsigned char *data, unsigned data_length, + int bulk_data) { unsigned long flags; @@ -1193,7 +1197,8 @@ static void garmin_read_process(struct g send it directly to the tty port */ if (garmin_data_p->flags & FLAGS_QUEUING) { pkt_add(garmin_data_p, data, data_length); - } else if (getLayerId(data) == GARMIN_LAYERID_APPL) { + } else if (bulk_data || + getLayerId(data) == GARMIN_LAYERID_APPL) { spin_lock_irqsave(&garmin_data_p->lock, flags); garmin_data_p->flags |= APP_RESP_SEEN; @@ -1237,7 +1242,7 @@ static void garmin_read_bulk_callback(st usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, data); - garmin_read_process(garmin_data_p, data, urb->actual_length); + garmin_read_process(garmin_data_p, data, urb->actual_length, 1); if (urb->actual_length == 0 && 0 != (garmin_data_p->flags & FLAGS_BULK_IN_RESTART)) { @@ -1346,7 +1351,7 @@ static void garmin_read_int_callback(str __func__, garmin_data_p->serial_num); } - garmin_read_process(garmin_data_p, data, urb->actual_length); + garmin_read_process(garmin_data_p, data, urb->actual_length, 0); port->interrupt_in_urb->dev = port->serial->dev; retval = usb_submit_urb(urb, GFP_ATOMIC); @@ -1461,6 +1466,7 @@ static int garmin_attach(struct usb_seri garmin_data_p->timer.function = timeout_handler; garmin_data_p->port = port; garmin_data_p->state = 0; + garmin_data_p->flags = 0; garmin_data_p->count = 0; usb_set_serial_port_data(port, garmin_data_p); -- Hermann Kneissel <herkne@xxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
