[PATCH 4/5] USB: gadget: Initialize ep0 once while registering gadget in ci13xxx_udc

[Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>]

From: Anji jonnala <anjir@xxxxxxxxxxxxxx>

Some of the simulators may cache the ep0 maxpacket size to zero
if the ep0 dQh is not setup before enabling the pullup. Hence
Setup ep0 and initialize the dQh fields once while registering the
gadget(before enabling the pullup).

HSUSB Chipidea link controller spec says ep0 is enabled always
in the HW. Hence disabling and enabling the ep0 as a part of
reset interrupt is unneccesary.
Remove the disable/enable ep0 logic from reset interrupt handling.

Signed-off-by: Anji jonnala <anjir@xxxxxxxxxxxxxx>
Signed-off-by: Pavankumar Kondeti <pkondeti@xxxxxxxxxxxxxx>
---
 drivers/usb/gadget/ci13xxx_udc.c |   31 +++++++++++++++++--------------
 1 files changed, 17 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c
index 0076db2..5fdc12d 100644
--- a/drivers/usb/gadget/ci13xxx_udc.c
+++ b/drivers/usb/gadget/ci13xxx_udc.c
@@ -1634,8 +1634,6 @@ static int _gadget_stop_activity(struct usb_gadget *gadget)
 	gadget_for_each_ep(ep, gadget) {
 		usb_ep_disable(ep);
 	}
-	usb_ep_disable(&udc->ep0out.ep);
-	usb_ep_disable(&udc->ep0in.ep);
 
 	if (udc->status != NULL) {
 		usb_ep_free_request(&udc->ep0in.ep, udc->status);
@@ -1678,18 +1676,10 @@ __acquires(udc->lock)
 	if (retval)
 		goto done;
 
-	retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc);
-	if (retval)
-		goto done;
+	udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
+	if (udc->status == NULL)
+		retval = -ENOMEM;
 
-	retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc);
-	if (!retval) {
-		udc->status = usb_ep_alloc_request(&udc->ep0in.ep, GFP_ATOMIC);
-		if (udc->status == NULL) {
-			usb_ep_disable(&udc->ep0out.ep);
-			retval = -ENOMEM;
-		}
-	}
 	spin_lock(udc->lock);
 
  done:
@@ -2120,7 +2110,12 @@ static int ep_enable(struct usb_ep *ep,
 		(mEp->ep.maxpacket << ffs_nr(QH_MAX_PKT)) & QH_MAX_PKT;
 	mEp->qh.ptr->td.next |= TD_TERMINATE;   /* needed? */
 
-	retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
+	/*
+	 * Enable endpoints in the HW other than ep0 as ep0
+	 * is always enabled
+	 */
+	if (mEp->num)
+		retval |= hw_ep_enable(mEp->num, mEp->dir, mEp->type);
 
 	spin_unlock_irqrestore(mEp->lock, flags);
 	return retval;
@@ -2609,6 +2604,14 @@ int usb_gadget_probe_driver(struct usb_gadget_driver *driver,
 	}
 	if (retval)
 		goto done;
+	spin_unlock_irqrestore(udc->lock, flags);
+	retval = usb_ep_enable(&udc->ep0out.ep, &ctrl_endpt_out_desc);
+	if (retval)
+		return retval;
+	retval = usb_ep_enable(&udc->ep0in.ep, &ctrl_endpt_in_desc);
+	if (retval)
+		return retval;
+	spin_lock_irqsave(udc->lock, flags);
 
 	udc->gadget.ep0 = &udc->ep0in.ep;
 	/* bind gadget */
-- 
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html