This patch adds host USB high speed driver for samsung S5P series. This
is initial driver and we need additional implementation to support some
functions like power management.
Signed-off-by: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
---
drivers/usb/Kconfig | 1 +
drivers/usb/host/Kconfig | 6 ++
drivers/usb/host/ehci-hcd.c | 5 +
drivers/usb/host/ehci-s5p.c | 201 +++++++++++++++++++++++++++++++++++++++++++
4 files changed, 213 insertions(+), 0 deletions(-)
create mode 100644 drivers/usb/host/ehci-s5p.c
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 41b6e51..e0a9f2a 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -65,6 +65,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_CNS3XXX
default y if ARCH_VT8500
default y if PLAT_SPEAR
+ default y if PLAT_S5P
default y if ARCH_MSM
default PCI
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index 9483acd..0fe36a2 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -188,6 +188,12 @@ config USB_EHCI_SH
Enables support for the on-chip EHCI controller on the SuperH.
If you use the PCI EHCI controller, this option is not necessary.
+config USB_EHCI_S5P
+ boolean "S5P EHCI support"
+ depends on USB_EHCI_HCD && PLAT_S5P
+ help
+ Enable support for the S5P SOC's on-chip EHCI controller.
+
config USB_W90X900_EHCI
bool "W90X900(W90P910) EHCI support"
depends on USB_EHCI_HCD && ARCH_W90X900
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 78561d1..6b20b3b 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1265,6 +1265,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER tegra_ehci_driver
#endif
+#ifdef CONFIG_USB_EHCI_S5P
+#include "ehci-s5p.c"
+#define PLATFORM_DRIVER s5p_ehci_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER) && \
!defined(XILINX_OF_PLATFORM_DRIVER)
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
new file mode 100644
index 0000000..0c18f28
--- /dev/null
+++ b/drivers/usb/host/ehci-s5p.c
@@ -0,0 +1,201 @@
+/*
+ * SAMSUNG S5P USB HOST EHCI Controller
+ *
+ * Copyright (C) 2011 Samsung Electronics Co.Ltd
+ * Author: Jingoo Han <jg1.han@xxxxxxxxxxx>
+ * Author: Joonyoung Shim <jy0922.shim@xxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <mach/regs-pmu.h>
+#include <plat/cpu.h>
+#include <plat/ehci.h>
+#include <plat/usb-phy.h>
+
+struct s5p_ehci_hcd {
+ struct device *dev;
+ struct usb_hcd *hcd;
+ struct clk *clk;
+};
+
+static const struct hc_driver s5p_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "S5P EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ .reset = ehci_init,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ .get_frame_number = ehci_get_frame,
+
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .endpoint_reset = ehci_endpoint_reset,
+
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+
+ .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
+};
+
+static int s5p_ehci_probe(struct platform_device *pdev)
+{
+ struct s5p_ehci_platdata *pdata;
+ struct s5p_ehci_hcd *s5p_ehci;
+ struct usb_hcd *hcd;
+ struct ehci_hcd *ehci;
+ struct resource *res;
+ int irq;
+ int err;
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "No platform data defined\n");
+ return -EINVAL;
+ }
+
+ s5p_ehci = kzalloc(sizeof(struct s5p_ehci_hcd), GFP_KERNEL);
+ if (!s5p_ehci)
+ return -ENOMEM;
+
+ s5p_ehci->dev = &pdev->dev;
+
+ hcd = usb_create_hcd(&s5p_ehci_hc_driver, &pdev->dev,
+ dev_name(&pdev->dev));
+ if (!hcd) {
+ dev_err(&pdev->dev, "Unable to create HCD\n");
+ err = -ENOMEM;
+ goto fail_hcd;
+ }
+
+ s5p_ehci->clk = clk_get(&pdev->dev, "usbhost");
+
+ if (IS_ERR(s5p_ehci->clk)) {
+ dev_err(&pdev->dev, "Failed to get usbhost clock\n");
+ err = PTR_ERR(s5p_ehci->clk);
+ goto fail_clk;
+ }
+
+ err = clk_enable(s5p_ehci->clk);
+ if (err)
+ goto fail_clken;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "Failed to get I/O memory\n");
+ err = -ENXIO;
+ goto fail_io;
+ }
+
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = resource_size(res);
+ hcd->regs = ioremap(res->start, resource_size(res));
+ if (!hcd->regs) {
+ dev_err(&pdev->dev, "Failed to remap I/O memory\n");
+ err = -ENOMEM;
+ goto fail_io;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "Failed to get IRQ\n");
+ err = -ENODEV;
+ goto fail;
+ }
+
+ if (pdata->phy_init)
+ pdata->phy_init(pdev, S5P_USB_PHY_HOST);
+
+ ehci = hcd_to_ehci(hcd);
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = readl(&ehci->caps->hcs_params);
+
+ err = usb_add_hcd(hcd, irq, IRQF_DISABLED | IRQF_SHARED);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add USB HCD\n");
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, s5p_ehci);
+
+ return 0;
+
+fail:
+ iounmap(hcd->regs);
+fail_io:
+ clk_disable(s5p_ehci->clk);
+fail_clken:
+ clk_put(s5p_ehci->clk);
+fail_clk:
+ usb_put_hcd(hcd);
+fail_hcd:
+ kfree(s5p_ehci);
+ return err;
+}
+
+static int s5p_ehci_remove(struct platform_device *pdev)
+{
+ struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
+ struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = s5p_ehci->hcd;
+
+ usb_remove_hcd(hcd);
+
+ if (pdata && pdata->phy_exit)
+ pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
+
+ iounmap(hcd->regs);
+
+ clk_disable(s5p_ehci->clk);
+ clk_put(s5p_ehci->clk);
+
+ usb_put_hcd(hcd);
+ kfree(s5p_ehci);
+
+ return 0;
+}
+
+static void s5p_ehci_shutdown(struct platform_device *pdev)
+{
+ struct s5p_ehci_hcd *s5p_ehci = platform_get_drvdata(pdev);
+ struct usb_hcd *hcd = s5p_ehci->hcd;
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+}
+
+static struct platform_driver s5p_ehci_driver = {
+ .probe = s5p_ehci_probe,
+ .remove = s5p_ehci_remove,
+ .shutdown = s5p_ehci_shutdown,
+ .driver = {
+ .name = "s5p-ehci",
+ .owner = THIS_MODULE,
+ }
+};
+
+MODULE_ALIAS("platform:s5p-ehci");
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
