There were some places that compared port_speed == -1 where port_speed
is a u8. This doesn't work unless we cast the -1 to u8. Some places
did it correctly.
Instead of using -1 directly, I've created a DUPLICATE_ENTRY define
which does the cast and is more descriptive as well.
Signed-off-by: Dan Carpenter <error27@xxxxxxxxx>
---
I'm not super familiar with this code... Compile tested only.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index a003e79..ab7fc2b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -846,7 +846,7 @@ static u32 xhci_find_real_port_number(struct xhci_hcd *xhci,
* Skip ports that don't have known speeds, or have duplicate
* Extended Capabilities port speed entries.
*/
- if (port_speed == 0 || port_speed == -1)
+ if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
continue;
/*
@@ -1727,12 +1727,12 @@ static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
* found a similar duplicate.
*/
if (xhci->port_array[i] != major_revision &&
- xhci->port_array[i] != (u8) -1) {
+ xhci->port_array[i] != DUPLICATE_ENTRY) {
if (xhci->port_array[i] == 0x03)
xhci->num_usb3_ports--;
else
xhci->num_usb2_ports--;
- xhci->port_array[i] = (u8) -1;
+ xhci->port_array[i] = DUPLICATE_ENTRY;
}
/* FIXME: Should we disable the port? */
continue;
@@ -1831,7 +1831,7 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
for (i = 0; i < num_ports; i++) {
if (xhci->port_array[i] == 0x03 ||
xhci->port_array[i] == 0 ||
- xhci->port_array[i] == -1)
+ xhci->port_array[i] == DUPLICATE_ENTRY)
continue;
xhci->usb2_ports[port_index] =
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index cfc1ad9..c6d1462 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -1209,7 +1209,7 @@ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd,
* Skip ports that don't have known speeds, or have duplicate
* Extended Capabilities port speed entries.
*/
- if (port_speed == 0 || port_speed == -1)
+ if (port_speed == 0 || port_speed == DUPLICATE_ENTRY)
continue;
/*
@@ -1260,7 +1260,7 @@ static void handle_port_status(struct xhci_hcd *xhci,
port_id);
goto cleanup;
}
- if (major_revision == (u8) -1) {
+ if (major_revision == DUPLICATE_ENTRY) {
xhci_warn(xhci, "Event for port %u duplicated in"
"Extended Capabilities, ignoring.\n",
port_id);
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 711de25..45bd5a2 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -348,6 +348,9 @@ struct xhci_op_regs {
/* Initiate a warm port reset - complete when PORT_WRC is '1' */
#define PORT_WR (1 << 31)
+/* We mark duplicate entries with -1 */
+#define DUPLICATE_ENTRY ((u8)(-1))
+
/* Port Power Management Status and Control - port_power_base bitmasks */
/* Inactivity timer value for transitions into U1, in microseconds.
* Timeout can be up to 127us. 0xFF means an infinite timeout.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
