Hello. Wifi goes wrong in last lines... Other (but I guess it's related) is that, sometimes after connecting USB device, whole USB subsystem fail and I have to reboot laptop. Wifi started had problems around 2.6.38, usb problem is here almost from beggining. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.38-rc5-00100-g0cc9d52-dirty (@) (gcc version 4.5.2 (Gentoo 4.5.2 p1.0, pie-0.4.5) ) #2 SMP Sun Feb 20 02:21:22 CET 2011 [ 0.000000] Command line: root=/dev/sda2 quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 0000000057e70000 (usable) [ 0.000000] BIOS-e820: 0000000057e70000 - 0000000057e82000 (ACPI data) [ 0.000000] BIOS-e820: 0000000057e82000 - 0000000057e84000 (ACPI NVS) [ 0.000000] BIOS-e820: 0000000057e84000 - 0000000060000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: TOSHIBA Satellite A210/SB600, BIOS 1.80 08/04/2008 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x57e70 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-CFFFF write-protect [ 0.000000] D0000-DFFFF uncachable [ 0.000000] E0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0000000000 mask FFC0000000 write-back [ 0.000000] 1 base 0040000000 mask FFE0000000 write-back [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] found SMP MP-table at [ffff8800000f83b0] f83b0 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] init_memory_mapping: 0000000000000000-0000000057e70000 [ 0.000000] 0000000000 - 0057e00000 page 2M [ 0.000000] 0057e00000 - 0057e70000 page 4k [ 0.000000] kernel direct mapping tables up to 57e70000 @ 1fffc000-20000000 [ 0.000000] ACPI: RSDP 00000000000f82f0 00024 (v02 TOSINV) [ 0.000000] ACPI: XSDT 0000000057e7a3ae 00054 (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: FACP 0000000057e81a8c 000F4 (v03 ATI Herring 06040000 ATI 000F4240) [ 0.000000] ACPI: DSDT 0000000057e7a402 0768A (v01 TOSINV SB600 06040000 MSFT 0100000E) [ 0.000000] ACPI: FACS 0000000057e83fc0 00040 [ 0.000000] ACPI: SSDT 0000000057e81bf4 001CE (v01 PTLTD POWERNOW 06040000 LTP 00000001) [ 0.000000] ACPI: APIC 0000000057e81dc2 00054 (v01 TOSINV ? APIC 06040000 INV 00000000) [ 0.000000] ACPI: SLIC 0000000057e81e16 00176 (v01 TOSINV TOSINV00 06040000 INV 00000000) [ 0.000000] ACPI: MCFG 0000000057e81f8c 0003C (v01 TOSINV MCFG 06040000 INV 00000000) [ 0.000000] ACPI: HPET 0000000057e81fc8 00038 (v01 PTLTD HPETTBL 06040000 LTP 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea00013fffff] PMD -> [ffff880056000000-ffff8800573fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal empty [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009d [ 0.000000] 0: 0x00000100 -> 0x00057e70 [ 0.000000] On node 0 totalpages: 359933 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 6 pages reserved [ 0.000000] DMA zone: 3919 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 4867 pages used for memmap [ 0.000000] DMA32 zone: 351085 pages, LIFO batch:31 [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x8008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 40 [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d0000 [ 0.000000] PM: Registered nosave memory: 00000000000d0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 60000000 (gap: 60000000:80000000) [ 0.000000] setup_percpu: NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 23 pages/cpu @ffff880057c00000 s73472 r0 d20736 u1048576 [ 0.000000] pcpu-alloc: s73472 r0 d20736 u1048576 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 355004 [ 0.000000] Kernel command line: root=/dev/sda2 quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 6e8000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Memory: 1406060k/1440192k available (6233k kernel code, 460k absent, 33672k reserved, 2603k data, 440k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] NR_IRQS:4352 nr_irqs:512 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 1795.857 MHz processor. [ 0.000000] Marking TSC unstable due to TSCs unsynchronized [ 0.001005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3591.71 BogoMIPS (lpj=1795857) [ 0.001010] pid_max: default: 32768 minimum: 301 [ 0.002046] Mount-cache hash table entries: 256 [ 0.002194] Initializing cgroup subsys ns [ 0.002196] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.002200] Initializing cgroup subsys cpuacct [ 0.002205] Initializing cgroup subsys freezer [ 0.002233] tseg: 0057f00000 [ 0.002235] CPU: Physical Processor ID: 0 [ 0.002237] CPU: Processor Core ID: 0 [ 0.002239] mce: CPU supports 5 MCE banks [ 0.002249] using C1E aware idle routine [ 0.002291] ACPI: Core revision 20110112 [ 0.002295] TOSHIBA Satellite detected - force copy of DSDT to local memory [ 0.002412] ACPI: Forced DSDT copy: length 0x0768A copied locally, original unmapped [ 0.006060] Setting APIC routing to flat [ 0.006377] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.006999] ..MP-BIOS bug: 8254 timer not connected to IO-APIC [ 0.006999] ...trying to set up timer (IRQ0) through the 8259A ... [ 0.006999] ..... (found apic 0 pin 0) ... [ 0.017030] ....... works. [ 0.017032] CPU0: AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 stepping 01 [ 0.017998] Performance Events: AMD PMU driver. [ 0.017998] ... version: 0 [ 0.017998] ... bit width: 48 [ 0.017998] ... generic registers: 4 [ 0.017998] ... value mask: 0000ffffffffffff [ 0.017998] ... max period: 00007fffffffffff [ 0.017998] ... fixed-purpose events: 0 [ 0.017998] ... event mask: 000000000000000f [ 0.017998] MCE: In-kernel MCE decoding enabled. [ 0.017998] Booting Node 0, Processors #1 Ok. [ 0.001999] System has AMD C1E enabled [ 0.001999] Switch to broadcast mode on CPU1 [ 0.088075] Brought up 2 CPUs [ 0.088077] Total of 2 processors activated (7183.14 BogoMIPS). [ 0.088213] Switch to broadcast mode on CPU0 [ 0.088213] NET: Registered protocol family 16 [ 0.089043] node 0 link 0: io port [1000, fffff] [ 0.089043] TOM: 0000000060000000 aka 1536M [ 0.089043] node 0 link 0: mmio [f8100000, ffffffff] [ 0.089043] node 0 link 0: mmio [f8000000, f80fffff] [ 0.089043] node 0 link 0: mmio [f8000000, f7ffffff] [ 0.089043] node 0 link 0: mmio [f0000000, f7ffffff] [ 0.089043] node 0 link 0: mmio [a0000, bffff] [ 0.089043] node 0 link 0: mmio [f0000000, efffffff] [ 0.089043] node 0 link 0: mmio [e0000000, efffffff] [ 0.089044] node 0 link 0: mmio [60000000, dfffffff] [ 0.089047] bus: [00, ff] on node 0 link 0 [ 0.089051] bus: 00 index 0 [io 0x0000-0xffff] [ 0.089053] bus: 00 index 1 [mem 0x60000000-0xfcffffffff] [ 0.089056] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.089080] ACPI: bus type pci registered [ 0.089094] PCI: MMCONFIG for domain 0000 [bus 00-18] at [mem 0xe0000000-0xe18fffff] (base 0xe0000000) [ 0.089094] PCI: MMCONFIG at [mem 0xe0000000-0xe18fffff] reserved in E820 [ 0.091636] PCI: Using configuration type 1 for base access [ 0.105046] bio: create slab <bio-0> at 0 [ 0.105181] ACPI: EC: Look up EC in DSDT [ 0.107575] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.260001] ACPI: Interpreter enabled [ 0.260005] ACPI: (supports S0 S3 S4 S5) [ 0.260026] ACPI: Using IOAPIC for interrupt routing [ 0.281036] ACPI: Power Resource [PFA1] (off) [ 0.281111] ACPI: EC: GPE = 0x7, I/O: command/status = 0x66, data = 0x62 [ 0.281111] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.282354] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.284087] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.284092] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d1fff] [ 0.284095] pci_root PNP0A08:00: host bridge window [mem 0x000d2000-0x000d3fff] [ 0.284098] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d5fff] [ 0.284101] pci_root PNP0A08:00: host bridge window [mem 0x000d6000-0x000d7fff] [ 0.284104] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000d9fff] [ 0.284107] pci_root PNP0A08:00: host bridge window [mem 0x000da000-0x000dbfff] [ 0.284110] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000ddfff] [ 0.284113] pci_root PNP0A08:00: host bridge window [mem 0x000de000-0x000dffff] [ 0.284116] pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] [ 0.284119] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xffffffff] [ 0.284123] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 0.284126] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 0.284142] pci 0000:00:00.0: [1002:7910] type 0 class 0x000600 [ 0.284173] pci 0000:00:01.0: [1002:7912] type 1 class 0x000604 [ 0.284211] pci 0000:00:04.0: [1002:7914] type 1 class 0x000604 [ 0.284237] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold [ 0.284241] pci 0000:00:04.0: PME# disabled [ 0.284255] pci 0000:00:05.0: [1002:7915] type 1 class 0x000604 [ 0.284281] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold [ 0.284284] pci 0000:00:05.0: PME# disabled [ 0.284298] pci 0000:00:06.0: [1002:7916] type 1 class 0x000604 [ 0.284324] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.284327] pci 0000:00:06.0: PME# disabled [ 0.284363] pci 0000:00:12.0: [1002:4380] type 0 class 0x000101 [ 0.284383] pci 0000:00:12.0: reg 10: [io 0x8440-0x8447] [ 0.284394] pci 0000:00:12.0: reg 14: [io 0x8434-0x8437] [ 0.284406] pci 0000:00:12.0: reg 18: [io 0x8438-0x843f] [ 0.284417] pci 0000:00:12.0: reg 1c: [io 0x8430-0x8433] [ 0.284428] pci 0000:00:12.0: reg 20: [io 0x8400-0x840f] [ 0.284440] pci 0000:00:12.0: reg 24: [mem 0xf8609000-0xf86093ff] [ 0.284463] pci 0000:00:12.0: set SATA to AHCI mode [ 0.284494] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03 [ 0.284510] pci 0000:00:13.0: reg 10: [mem 0xf8604000-0xf8604fff] [ 0.284581] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03 [ 0.284596] pci 0000:00:13.1: reg 10: [mem 0xf8605000-0xf8605fff] [ 0.284667] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03 [ 0.284682] pci 0000:00:13.2: reg 10: [mem 0xf8606000-0xf8606fff] [ 0.284752] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03 [ 0.284768] pci 0000:00:13.3: reg 10: [mem 0xf8607000-0xf8607fff] [ 0.284838] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03 [ 0.284853] pci 0000:00:13.4: reg 10: [mem 0xf8608000-0xf8608fff] [ 0.284929] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03 [ 0.284951] pci 0000:00:13.5: reg 10: [mem 0xf8609400-0xf86094ff] [ 0.285034] pci 0000:00:13.5: supports D1 D2 [ 0.285037] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot [ 0.285042] pci 0000:00:13.5: PME# disabled [ 0.285066] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.285091] pci 0000:00:14.0: reg 10: [io 0x8410-0x841f] [ 0.285174] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101 [ 0.285189] pci 0000:00:14.1: reg 10: [io 0x01f0-0x01f7] [ 0.285201] pci 0000:00:14.1: reg 14: [io 0x03f4-0x03f7] [ 0.285212] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.285223] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.285235] pci 0000:00:14.1: reg 20: [io 0x8420-0x842f] [ 0.285276] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.285301] pci 0000:00:14.2: reg 10: [mem 0xf8600000-0xf8603fff 64bit] [ 0.285365] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.285370] pci 0000:00:14.2: PME# disabled [ 0.285386] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601 [ 0.285469] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.285519] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600 [ 0.285538] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600 [ 0.285554] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600 [ 0.285571] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600 [ 0.285618] pci 0000:01:05.0: [1002:791f] type 0 class 0x000300 [ 0.285629] pci 0000:01:05.0: reg 10: [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.285637] pci 0000:01:05.0: reg 18: [mem 0xf8100000-0xf810ffff 64bit] [ 0.285643] pci 0000:01:05.0: reg 20: [io 0x9000-0x90ff] [ 0.285649] pci 0000:01:05.0: reg 24: [mem 0xf8000000-0xf80fffff] [ 0.285662] pci 0000:01:05.0: supports D1 D2 [ 0.285678] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.285682] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.285686] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.285691] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.285716] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.285720] pci 0000:00:04.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.285724] pci 0000:00:04.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.285729] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.285771] pci 0000:08:00.0: [10ec:8136] type 0 class 0x000200 [ 0.285787] pci 0000:08:00.0: reg 10: [io 0xa000-0xa0ff] [ 0.285814] pci 0000:08:00.0: reg 18: [mem 0xf8200000-0xf8200fff 64bit] [ 0.285844] pci 0000:08:00.0: reg 30: [mem 0x00000000-0x0001ffff pref] [ 0.285882] pci 0000:08:00.0: supports D1 D2 [ 0.285885] pci 0000:08:00.0: PME# supported from D1 D2 D3hot D3cold [ 0.285890] pci 0000:08:00.0: PME# disabled [ 0.285905] pci 0000:08:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force' [ 0.285915] pci 0000:00:05.0: PCI bridge to [bus 08-0d] [ 0.285919] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.285923] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff] [ 0.285927] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.285952] pci 0000:00:06.0: PCI bridge to [bus 0e-13] [ 0.285956] pci 0000:00:06.0: bridge window [io 0x0000-0x0000] (disabled) [ 0.285960] pci 0000:00:06.0: bridge window [mem 0x00000000-0x000fffff] (disabled) [ 0.285965] pci 0000:00:06.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.286004] pci 0000:14:06.0: [1180:0832] type 0 class 0x000c00 [ 0.286021] pci 0000:14:06.0: proprietary Ricoh MMC controller disabled (via firewire function) [ 0.286024] pci 0000:14:06.0: MMC cards are now supported by standard SDHCI controller [ 0.286042] pci 0000:14:06.0: reg 10: [mem 0xf8300000-0xf83007ff] [ 0.286133] pci 0000:14:06.0: supports D1 D2 [ 0.286136] pci 0000:14:06.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286141] pci 0000:14:06.0: PME# disabled [ 0.286165] pci 0000:14:06.1: [1180:0822] type 0 class 0x000805 [ 0.286189] pci 0000:14:06.1: reg 10: [mem 0xf8300800-0xf83008ff] [ 0.286280] pci 0000:14:06.1: supports D1 D2 [ 0.286282] pci 0000:14:06.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286288] pci 0000:14:06.1: PME# disabled [ 0.286311] pci 0000:14:06.2: [1180:0592] type 0 class 0x000880 [ 0.286335] pci 0000:14:06.2: reg 10: [mem 0xf8301000-0xf83010ff] [ 0.286427] pci 0000:14:06.2: supports D1 D2 [ 0.286429] pci 0000:14:06.2: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286435] pci 0000:14:06.2: PME# disabled [ 0.286459] pci 0000:14:06.3: [1180:0852] type 0 class 0x000880 [ 0.286482] pci 0000:14:06.3: reg 10: [mem 0xf8301400-0xf83014ff] [ 0.286574] pci 0000:14:06.3: supports D1 D2 [ 0.286577] pci 0000:14:06.3: PME# supported from D0 D1 D2 D3hot D3cold [ 0.286582] pci 0000:14:06.3: PME# disabled [ 0.286639] pci 0000:00:14.4: PCI bridge to [bus 14-19] (subtractive decode) [ 0.286645] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.286651] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff] [ 0.286656] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.286659] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.286663] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d1fff] (subtractive decode) [ 0.286666] pci 0000:00:14.4: bridge window [mem 0x000d2000-0x000d3fff] (subtractive decode) [ 0.286669] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d5fff] (subtractive decode) [ 0.286672] pci 0000:00:14.4: bridge window [mem 0x000d6000-0x000d7fff] (subtractive decode) [ 0.286676] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000d9fff] (subtractive decode) [ 0.286679] pci 0000:00:14.4: bridge window [mem 0x000da000-0x000dbfff] (subtractive decode) [ 0.286682] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000ddfff] (subtractive decode) [ 0.286686] pci 0000:00:14.4: bridge window [mem 0x000de000-0x000dffff] (subtractive decode) [ 0.286689] pci 0000:00:14.4: bridge window [mem 0x60000000-0xdfffffff] (subtractive decode) [ 0.286692] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.286695] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.286699] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.286717] pci_bus 0000:00: on NUMA node 0 [ 0.286722] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.286817] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB4_._PRT] [ 0.286860] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB5_._PRT] [ 0.286902] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB6_._PRT] [ 0.286947] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB4_._PRT] [ 0.287019] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BB5_._PRT] [ 0.287108] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT] [ 0.287142] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 0.287178] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.293070] ACPI: PCI Interrupt Link [LNKA] (IRQs 10 11) *0, disabled. [ 0.293121] ACPI: PCI Interrupt Link [LNKB] (IRQs 10 11) *0, disabled. [ 0.293167] ACPI: PCI Interrupt Link [LNKC] (IRQs 10 11) *0, disabled. [ 0.293219] ACPI: PCI Interrupt Link [LNKD] (IRQs 10 11) *0, disabled. [ 0.293264] ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled. [ 0.293311] ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled. [ 0.293356] ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled. [ 0.293403] ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled. [ 0.294039] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.294039] vgaarb: loaded [ 0.294103] SCSI subsystem initialized [ 0.294103] libata version 3.00 loaded. [ 0.294103] usbcore: registered new interface driver usbfs [ 0.294103] usbcore: registered new interface driver hub [ 0.294103] usbcore: registered new device driver usb [ 0.295021] wmi: Mapper loaded [ 0.295021] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.295021] PCI: Using ACPI for IRQ routing [ 0.295021] PCI: pci_cache_line_size set to 64 bytes [ 0.295132] reserve RAM buffer: 000000000009dc00 - 000000000009ffff [ 0.295135] reserve RAM buffer: 0000000057e70000 - 0000000057ffffff [ 0.295156] Bluetooth: Core ver 2.15 [ 0.295156] NET: Registered protocol family 31 [ 0.295156] Bluetooth: HCI device and connection manager initialized [ 0.295156] Bluetooth: HCI socket layer initialized [ 0.296068] cfg80211: Calling CRDA to update world regulatory domain [ 0.296240] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.296240] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.298009] Switching to clocksource hpet [ 0.298071] FS-Cache: Loaded [ 0.298111] CacheFiles: Loaded [ 0.298161] pnp: PnP ACPI init [ 0.298177] ACPI: bus type pnp registered [ 0.298385] Switched to NOHz mode on CPU #1 [ 0.298387] Switched to NOHz mode on CPU #0 [ 0.299992] pnp 00:00: [bus 00-ff] [ 0.299996] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.299999] pnp 00:00: [mem 0x000c0000-0x000c1fff window] [ 0.300014] pnp 00:00: [mem 0x000c2000-0x000c3fff window] [ 0.300017] pnp 00:00: [mem 0x000c4000-0x000c5fff window] [ 0.300020] pnp 00:00: [mem 0x000c6000-0x000c7fff window] [ 0.300023] pnp 00:00: [mem 0x000c8000-0x000c9fff window] [ 0.300026] pnp 00:00: [mem 0x000ca000-0x000cbfff window] [ 0.300029] pnp 00:00: [mem 0x000cc000-0x000cdfff window] [ 0.300032] pnp 00:00: [mem 0x000ce000-0x000cffff window] [ 0.300035] pnp 00:00: [mem 0x000d0000-0x000d1fff window] [ 0.300038] pnp 00:00: [mem 0x000d2000-0x000d3fff window] [ 0.300041] pnp 00:00: [mem 0x000d4000-0x000d5fff window] [ 0.300044] pnp 00:00: [mem 0x000d6000-0x000d7fff window] [ 0.300047] pnp 00:00: [mem 0x000d8000-0x000d9fff window] [ 0.300050] pnp 00:00: [mem 0x000da000-0x000dbfff window] [ 0.300054] pnp 00:00: [mem 0x000dc000-0x000ddfff window] [ 0.300057] pnp 00:00: [mem 0x000de000-0x000dffff window] [ 0.300060] pnp 00:00: [mem 0x000e0000-0x000e1fff window] [ 0.300063] pnp 00:00: [mem 0x000e2000-0x000e3fff window] [ 0.300066] pnp 00:00: [mem 0x000e4000-0x000e5fff window] [ 0.300069] pnp 00:00: [mem 0x000e6000-0x000e7fff window] [ 0.300073] pnp 00:00: [mem 0x000e8000-0x000e9fff window] [ 0.300076] pnp 00:00: [mem 0x000ea000-0x000ebfff window] [ 0.300079] pnp 00:00: [mem 0x000ec000-0x000edfff window] [ 0.300082] pnp 00:00: [mem 0x000ee000-0x000effff window] [ 0.300085] pnp 00:00: [mem 0x60000000-0xdfffffff window] [ 0.300088] pnp 00:00: [mem 0xf0000000-0xffffffff window] [ 0.300092] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.300095] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.300098] pnp 00:00: [io 0x0d00-0xffff window] [ 0.300258] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) [ 0.300321] pnp 00:01: [mem 0xfec00000-0xfec00fff] [ 0.300324] pnp 00:01: [mem 0xfee00000-0xfee00fff] [ 0.300466] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.300470] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.300474] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.300878] pnp 00:02: [io 0x0000-0x001f] [ 0.300881] pnp 00:02: [io 0x0080-0x008f] [ 0.300884] pnp 00:02: [io 0x00c0-0x00df] [ 0.300887] pnp 00:02: [dma 4] [ 0.300996] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.301047] pnp 00:03: [io 0x00f0-0x00fe] [ 0.301060] pnp 00:03: [irq 13] [ 0.301161] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.301176] pnp 00:04: [io 0x0070-0x0071] [ 0.301182] pnp 00:04: [irq 8] [ 0.301278] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.301290] pnp 00:05: [io 0x0061] [ 0.301390] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.301404] pnp 00:06: [io 0x0060] [ 0.301406] pnp 00:06: [io 0x0064] [ 0.301412] pnp 00:06: [irq 1] [ 0.301512] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.301527] pnp 00:07: [irq 12] [ 0.301633] pnp 00:07: Plug and Play ACPI device, IDs SYN1909 SYN1900 SYN0002 PNP0f13 (active) [ 0.301655] pnp 00:08: [io 0x0022-0x0023] [ 0.301658] pnp 00:08: [io 0x002e-0x002f] [ 0.301661] pnp 00:08: [io 0x0072-0x0073] [ 0.301663] pnp 00:08: [io 0x1080] [ 0.301666] pnp 00:08: [io 0x00b0-0x00b1] [ 0.301668] pnp 00:08: [io 0x0092] [ 0.301670] pnp 00:08: [io 0x0068] [ 0.301673] pnp 00:08: [io 0x006c] [ 0.301675] pnp 00:08: [io 0x0220-0x022f] [ 0.301678] pnp 00:08: [io 0x040b] [ 0.301680] pnp 00:08: [io 0x04d0-0x04d1] [ 0.301683] pnp 00:08: [io 0x04d6] [ 0.301685] pnp 00:08: [io 0x0530-0x0537] [ 0.301688] pnp 00:08: [io 0x0c00-0x0c01] [ 0.301690] pnp 00:08: [io 0x0c14] [ 0.301693] pnp 00:08: [io 0x0c50-0x0c52] [ 0.301696] pnp 00:08: [io 0x0c6c] [ 0.301698] pnp 00:08: [io 0x0c6f] [ 0.301700] pnp 00:08: [io 0x0cd0-0x0cd1] [ 0.301703] pnp 00:08: [io 0x0cd2-0x0cd3] [ 0.301705] pnp 00:08: [io 0x0cd4-0x0cd5] [ 0.301708] pnp 00:08: [io 0x0cd6-0x0cd7] [ 0.301711] pnp 00:08: [io 0x0cd8-0x0cdf] [ 0.301713] pnp 00:08: [io 0xfe00] [ 0.301716] pnp 00:08: [io 0x8000-0x805f] [ 0.301719] pnp 00:08: [io 0x8100-0x81ff window] [ 0.301722] pnp 00:08: [io 0x8200-0x82ff window] [ 0.301725] pnp 00:08: [io 0x0f40-0x0f47] [ 0.301727] pnp 00:08: [io 0x087f] [ 0.301906] system 00:08: [io 0x1080] has been reserved [ 0.301910] system 00:08: [io 0x0220-0x022f] has been reserved [ 0.301914] system 00:08: [io 0x040b] has been reserved [ 0.301917] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 0.301921] system 00:08: [io 0x04d6] has been reserved [ 0.301924] system 00:08: [io 0x0530-0x0537] has been reserved [ 0.301928] system 00:08: [io 0x0c00-0x0c01] has been reserved [ 0.301934] system 00:08: [io 0x0c14] has been reserved [ 0.301937] system 00:08: [io 0x0c50-0x0c52] has been reserved [ 0.301940] system 00:08: [io 0x0c6c] has been reserved [ 0.301943] system 00:08: [io 0x0c6f] has been reserved [ 0.301946] system 00:08: [io 0x0cd0-0x0cd1] has been reserved [ 0.301950] system 00:08: [io 0x0cd2-0x0cd3] has been reserved [ 0.301953] system 00:08: [io 0x0cd4-0x0cd5] has been reserved [ 0.301956] system 00:08: [io 0x0cd6-0x0cd7] has been reserved [ 0.301959] system 00:08: [io 0x0cd8-0x0cdf] has been reserved [ 0.301962] system 00:08: [io 0xfe00] has been reserved [ 0.301966] system 00:08: [io 0x8000-0x805f] has been reserved [ 0.301969] system 00:08: [io 0x8100-0x81ff window] has been reserved [ 0.301973] system 00:08: [io 0x8200-0x82ff window] has been reserved [ 0.301976] system 00:08: [io 0x0f40-0x0f47] has been reserved [ 0.301979] system 00:08: [io 0x087f] has been reserved [ 0.301983] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302073] pnp 00:09: [mem 0x000e0000-0x000fffff] [ 0.302079] pnp 00:09: [mem 0xff800000-0xff80ffff] [ 0.302082] pnp 00:09: [mem 0xfff00000-0xffffffff] [ 0.302084] pnp 00:09: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.302243] system 00:09: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.302247] system 00:09: [mem 0xff800000-0xff80ffff] has been reserved [ 0.302251] system 00:09: [mem 0xfff00000-0xffffffff] has been reserved [ 0.302255] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.302373] pnp 00:0a: [mem 0xfed00000-0xfed003ff] [ 0.302488] pnp 00:0a: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.303988] pnp: PnP ACPI: found 11 devices [ 0.303990] ACPI: ACPI bus type pnp unregistered [ 0.315135] pci 0000:00:04.0: BAR 8: assigned [mem 0x60000000-0x601fffff] [ 0.315143] pci 0000:00:04.0: BAR 9: assigned [mem 0x60200000-0x603fffff 64bit pref] [ 0.315149] pci 0000:00:05.0: BAR 9: assigned [mem 0x60400000-0x604fffff pref] [ 0.315154] pci 0000:00:06.0: BAR 8: assigned [mem 0x60500000-0x606fffff] [ 0.315160] pci 0000:00:06.0: BAR 9: assigned [mem 0x60700000-0x608fffff 64bit pref] [ 0.315166] pci 0000:00:04.0: BAR 7: assigned [io 0x2000-0x2fff] [ 0.315171] pci 0000:00:06.0: BAR 7: assigned [io 0x3000-0x3fff] [ 0.315175] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.315178] pci 0000:00:01.0: bridge window [io 0x9000-0x9fff] [ 0.315182] pci 0000:00:01.0: bridge window [mem 0xf8000000-0xf81fffff] [ 0.315186] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.315190] pci 0000:00:04.0: PCI bridge to [bus 02-07] [ 0.315193] pci 0000:00:04.0: bridge window [io 0x2000-0x2fff] [ 0.315197] pci 0000:00:04.0: bridge window [mem 0x60000000-0x601fffff] [ 0.315201] pci 0000:00:04.0: bridge window [mem 0x60200000-0x603fffff 64bit pref] [ 0.315206] pci 0000:08:00.0: BAR 6: assigned [mem 0x60400000-0x6041ffff pref] [ 0.315209] pci 0000:00:05.0: PCI bridge to [bus 08-0d] [ 0.315213] pci 0000:00:05.0: bridge window [io 0xa000-0xafff] [ 0.315216] pci 0000:00:05.0: bridge window [mem 0xf8200000-0xf82fffff] [ 0.315220] pci 0000:00:05.0: bridge window [mem 0x60400000-0x604fffff pref] [ 0.315224] pci 0000:00:06.0: PCI bridge to [bus 0e-13] [ 0.315227] pci 0000:00:06.0: bridge window [io 0x3000-0x3fff] [ 0.315231] pci 0000:00:06.0: bridge window [mem 0x60500000-0x606fffff] [ 0.315235] pci 0000:00:06.0: bridge window [mem 0x60700000-0x608fffff 64bit pref] [ 0.315241] pci 0000:00:14.4: PCI bridge to [bus 14-19] [ 0.315243] pci 0000:00:14.4: bridge window [io disabled] [ 0.315252] pci 0000:00:14.4: bridge window [mem 0xf8300000-0xf83fffff] [ 0.315257] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.315273] pci 0000:00:04.0: enabling device (0000 -> 0003) [ 0.315277] pci 0000:00:04.0: setting latency timer to 64 [ 0.315282] pci 0000:00:05.0: setting latency timer to 64 [ 0.315287] pci 0000:00:06.0: enabling device (0000 -> 0003) [ 0.315291] pci 0000:00:06.0: setting latency timer to 64 [ 0.315300] pci_bus 0000:00: resource 4 [mem 0x000a0000-0x000bffff] [ 0.315303] pci_bus 0000:00: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.315306] pci_bus 0000:00: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.315308] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.315311] pci_bus 0000:00: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.315314] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.315316] pci_bus 0000:00: resource 10 [mem 0x000da000-0x000dbfff] [ 0.315319] pci_bus 0000:00: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.315322] pci_bus 0000:00: resource 12 [mem 0x000de000-0x000dffff] [ 0.315325] pci_bus 0000:00: resource 13 [mem 0x60000000-0xdfffffff] [ 0.315328] pci_bus 0000:00: resource 14 [mem 0xf0000000-0xffffffff] [ 0.315330] pci_bus 0000:00: resource 15 [io 0x0000-0x0cf7] [ 0.315333] pci_bus 0000:00: resource 16 [io 0x0d00-0xffff] [ 0.315336] pci_bus 0000:01: resource 0 [io 0x9000-0x9fff] [ 0.315340] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xf81fffff] [ 0.315342] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xf7ffffff 64bit pref] [ 0.315346] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] [ 0.315348] pci_bus 0000:02: resource 1 [mem 0x60000000-0x601fffff] [ 0.315352] pci_bus 0000:02: resource 2 [mem 0x60200000-0x603fffff 64bit pref] [ 0.315355] pci_bus 0000:08: resource 0 [io 0xa000-0xafff] [ 0.315358] pci_bus 0000:08: resource 1 [mem 0xf8200000-0xf82fffff] [ 0.315361] pci_bus 0000:08: resource 2 [mem 0x60400000-0x604fffff pref] [ 0.315364] pci_bus 0000:0e: resource 0 [io 0x3000-0x3fff] [ 0.315367] pci_bus 0000:0e: resource 1 [mem 0x60500000-0x606fffff] [ 0.315370] pci_bus 0000:0e: resource 2 [mem 0x60700000-0x608fffff 64bit pref] [ 0.315373] pci_bus 0000:14: resource 1 [mem 0xf8300000-0xf83fffff] [ 0.315376] pci_bus 0000:14: resource 4 [mem 0x000a0000-0x000bffff] [ 0.315379] pci_bus 0000:14: resource 5 [mem 0x000d0000-0x000d1fff] [ 0.315381] pci_bus 0000:14: resource 6 [mem 0x000d2000-0x000d3fff] [ 0.315384] pci_bus 0000:14: resource 7 [mem 0x000d4000-0x000d5fff] [ 0.315387] pci_bus 0000:14: resource 8 [mem 0x000d6000-0x000d7fff] [ 0.315390] pci_bus 0000:14: resource 9 [mem 0x000d8000-0x000d9fff] [ 0.315392] pci_bus 0000:14: resource 10 [mem 0x000da000-0x000dbfff] [ 0.315395] pci_bus 0000:14: resource 11 [mem 0x000dc000-0x000ddfff] [ 0.315398] pci_bus 0000:14: resource 12 [mem 0x000de000-0x000dffff] [ 0.315401] pci_bus 0000:14: resource 13 [mem 0x60000000-0xdfffffff] [ 0.315404] pci_bus 0000:14: resource 14 [mem 0xf0000000-0xffffffff] [ 0.315406] pci_bus 0000:14: resource 15 [io 0x0000-0x0cf7] [ 0.315409] pci_bus 0000:14: resource 16 [io 0x0d00-0xffff] [ 0.315449] NET: Registered protocol family 2 [ 0.315495] IP route cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.316118] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.319606] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.320488] TCP: Hash tables configured (established 262144 bind 65536) [ 0.320492] TCP reno registered [ 0.320497] UDP hash table entries: 1024 (order: 3, 32768 bytes) [ 0.320527] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes) [ 0.320663] NET: Registered protocol family 1 [ 0.320796] pci 0000:01:05.0: Boot video device [ 0.320814] PCI: CLS 32 bytes, default 64 [ 0.322975] audit: initializing netlink socket (disabled) [ 0.322989] type=2000 audit(1298315313.321:1): initialized [ 0.323486] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.329480] VFS: Disk quotas dquot_6.5.2 [ 0.329608] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.331270] fuse init (API version 7.16) [ 0.331550] msgmni has been set to 2746 [ 0.332399] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.332404] io scheduler noop registered [ 0.332406] io scheduler deadline registered [ 0.332515] io scheduler cfq registered (default) [ 0.332687] pcieport 0000:00:04.0: setting latency timer to 64 [ 0.332721] pcieport 0000:00:04.0: irq 40 for MSI/MSI-X [ 0.332833] pcieport 0000:00:05.0: setting latency timer to 64 [ 0.332857] pcieport 0000:00:05.0: irq 41 for MSI/MSI-X [ 0.332959] pcieport 0000:00:06.0: setting latency timer to 64 [ 0.332982] pcieport 0000:00:06.0: irq 42 for MSI/MSI-X [ 0.336093] ACPI: AC Adapter [ADP0] (on-line) [ 0.337696] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 0.337703] ACPI: Power Button [PWRB] [ 0.337848] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1 [ 0.338587] ACPI: Lid Switch [LID] [ 0.338704] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 [ 0.338708] ACPI: Power Button [PWRF] [ 0.338918] ACPI: Fan [FAN1] (off) [ 0.343323] acpi device:1f: registered as cooling_device1 [ 0.343461] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1d/LNXVIDEO:00/input/input3 [ 0.343468] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 0.343536] ACPI: acpi_idle registered with cpuidle [ 0.343572] ACPI: processor limited to max C-state 1 [ 0.365854] thermal LNXTHERM:00: registered as thermal_zone0 [ 0.365858] ACPI: Thermal Zone [TZCR] (38 C) [ 0.369593] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.375238] ACPI: Battery Slot [BAT0] (battery present) [ 0.424367] Initializing Nozomi driver 2.1d (build date: Feb 20 2011 01:22:48) [ 0.424874] Non-volatile memory driver v1.3 [ 0.424989] [drm] Initialized drm 1.1.0 20060810 [ 0.425086] [drm] radeon defaulting to kernel modesetting. [ 0.425088] [drm] radeon kernel modesetting enabled. [ 0.425181] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 0.425185] radeon 0000:01:05.0: power state changed by ACPI to D0 [ 0.425206] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 0.429437] [drm] initializing kernel modesetting (RS690 0x1002:0x791F). [ 0.429466] [drm] register mmio base: 0xF8100000 [ 0.429468] [drm] register mmio size: 65536 [ 0.429587] ATOM BIOS: ATI [ 0.429608] radeon 0000:01:05.0: VRAM: 128M 0x0000000058000000 - 0x000000005FFFFFFF (128M used) [ 0.429612] radeon 0000:01:05.0: GTT: 512M 0x0000000060000000 - 0x000000007FFFFFFF [ 0.429633] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 0.429635] [drm] Driver supports precise vblank timestamp query. [ 0.429666] [drm] radeon: irq initialized. [ 0.429824] [drm] Detected VRAM RAM=128M, BAR=128M [ 0.429830] [drm] RAM width 128bits DDR [ 0.429936] [TTM] Zone kernel: Available graphics memory: 703030 kiB. [ 0.429939] [TTM] Initializing pool allocator. [ 0.429964] [drm] radeon: 128M of VRAM memory ready [ 0.429966] [drm] radeon: 512M of GTT memory ready. [ 0.429991] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 0.435105] [drm] radeon: 1 quad pipes, 1 z pipes initialized. [ 0.444268] radeon 0000:01:05.0: WB enabled [ 0.444425] [drm] Loading RS690/RS740 Microcode [ 0.444638] [drm] radeon: ring at 0x0000000060001000 [ 0.444657] [drm] ring test succeeded in 1 usecs [ 0.444809] [drm] radeon: ib pool ready. [ 0.444879] [drm] ib test succeeded in 0 usecs [ 0.444887] [drm] Enabling audio support [ 0.445796] [drm] Radeon Display Connectors [ 0.445799] [drm] Connector 0: [ 0.445801] [drm] VGA [ 0.445804] [drm] DDC: 0x7e50 0x7e40 0x7e54 0x7e44 0x7e58 0x7e48 0x7e5c 0x7e4c [ 0.445806] [drm] Encoders: [ 0.445808] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 0.445810] [drm] Connector 1: [ 0.445811] [drm] LVDS [ 0.445814] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c [ 0.445816] [drm] Encoders: [ 0.445818] [drm] LCD1: INTERNAL_LVTM1 [ 0.445819] [drm] Connector 2: [ 0.445821] [drm] S-video [ 0.445823] [drm] Encoders: [ 0.445824] [drm] TV1: INTERNAL_KLDSCP_DAC1 [ 1.073229] [drm] fb mappable at 0xF0040000 [ 1.073231] [drm] vram apper at 0xF0000000 [ 1.073233] [drm] size 4096000 [ 1.073234] [drm] fb depth is 24 [ 1.073236] [drm] pitch is 5120 [ 1.405309] Console: switching to colour frame buffer device 160x50 [ 1.414926] fb0: radeondrmfb frame buffer device [ 1.414928] drm: registered panic notifier [ 1.414941] [drm] Initialized radeon 2.8.0 20080528 for 0000:01:05.0 on minor 0 [ 1.418300] brd: module loaded [ 1.419923] loop: module loaded [ 1.420279] ahci 0000:00:12.0: version 3.0 [ 1.420306] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 1.420341] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit [ 1.420456] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.420460] ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.422259] scsi0 : ahci [ 1.422601] scsi1 : ahci [ 1.422833] scsi2 : ahci [ 1.423117] scsi3 : ahci [ 1.423390] ata1: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609100 irq 22 [ 1.423394] ata2: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609180 irq 22 [ 1.423398] ata3: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609200 irq 22 [ 1.423403] ata4: SATA max UDMA/133 abar m1024@0xf8609000 port 0xf8609280 irq 22 [ 1.423727] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.423778] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.424730] scsi4 : pata_atiixp [ 1.424968] scsi5 : pata_atiixp [ 1.425646] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x8420 irq 14 [ 1.425649] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x8428 irq 15 [ 1.426230] PPP generic driver version 2.4.2 [ 1.426422] PPP Deflate Compression module registered [ 1.426425] PPP BSD Compression module registered [ 1.426543] PPP MPPE Compression module registered [ 1.426547] NET: Registered protocol family 24 [ 1.426591] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 1.426628] r8169 0000:08:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.426674] r8169 0000:08:00.0: setting latency timer to 64 [ 1.426734] r8169 0000:08:00.0: irq 43 for MSI/MSI-X [ 1.427089] r8169 0000:08:00.0: eth0: RTL8101e at 0xffffc90000010000, 00:a0:d1:84:f0:e3, XID 94200000 IRQ 43 [ 1.431179] usbcore: registered new interface driver cdc_ether [ 1.431240] usbcore: registered new interface driver cdc_eem [ 1.431299] usbcore: registered new interface driver cdc_subset [ 1.431370] usbcore: registered new interface driver rtl8187 [ 1.431487] firewire_ohci 0000:14:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 1.482127] firewire_ohci: Added fw-ohci device 0000:14:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1 [ 1.482674] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.482678] ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 [ 1.482776] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1.482784] ehci_hcd 0000:00:13.5: power state changed by ACPI to D0 [ 1.482805] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.482832] ehci_hcd 0000:00:13.5: EHCI Host Controller [ 1.482840] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1 [ 1.486053] ehci_hcd 0000:00:13.5: reset hcs_params 0x10520a dbg=1 cc=5 pcc=2 ordered !ppc ports=10 [ 1.486058] ehci_hcd 0000:00:13.5: reset hcc_params a072 thresh 7 uframes 256/512/1024 [ 1.486088] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround [ 1.486103] ehci_hcd 0000:00:13.5: debug port 1 [ 1.486110] ehci_hcd 0000:00:13.5: reset command 0080032 (park)=0 ithresh=8 Async Periodic period=1024 Reset HALT [ 1.486120] ehci_hcd 0000:00:13.5: MWI active [ 1.486122] ehci_hcd 0000:00:13.5: supports USB remote wakeup [ 1.486145] ehci_hcd 0000:00:13.5: irq 19, io mem 0xf8609400 [ 1.486151] ehci_hcd 0000:00:13.5: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 1.486160] ehci_hcd 0000:00:13.5: init command 0010005 (park)=0 ithresh=1 period=512 RUN [ 1.492038] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00 [ 1.492076] usb usb1: default language 0x0409 [ 1.492085] usb usb1: udev 1, busnum 1, minor = 0 [ 1.492088] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.492092] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.492096] usb usb1: Product: EHCI Host Controller [ 1.492099] usb usb1: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ehci_hcd [ 1.492102] usb usb1: SerialNumber: 0000:00:13.5 [ 1.492260] usb usb1: usb_probe_device [ 1.492264] usb usb1: configuration #1 chosen from 1 choice [ 1.492274] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 1.492356] hub 1-0:1.0: usb_probe_interface [ 1.492359] hub 1-0:1.0: usb_probe_interface - got id [ 1.492362] hub 1-0:1.0: USB hub found [ 1.492368] hub 1-0:1.0: 10 ports detected [ 1.492371] hub 1-0:1.0: standalone hub [ 1.492373] hub 1-0:1.0: no power switching (usb 1.0) [ 1.492375] hub 1-0:1.0: individual port over-current protection [ 1.492378] hub 1-0:1.0: power on to power good time: 20ms [ 1.492383] hub 1-0:1.0: local power source is good [ 1.492386] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 1.492556] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.492559] ohci_hcd: block sizes: ed 80 td 96 [ 1.492586] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.492610] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.492617] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2 [ 1.499057] ohci_hcd 0000:00:13.0: created debug files [ 1.499060] ohci_hcd 0000:00:13.0: supports USB remote wakeup [ 1.499083] ohci_hcd 0000:00:13.0: irq 16, io mem 0xf8604000 [ 1.550047] ohci_hcd 0000:00:13.0: OHCI controller state [ 1.550051] ohci_hcd 0000:00:13.0: OHCI 1.0, NO legacy support registers [ 1.550058] ohci_hcd 0000:00:13.0: control 0x283 RWC HCFS=operational CBSR=3 [ 1.550063] ohci_hcd 0000:00:13.0: cmdstatus 0x00000 SOC=0 [ 1.550069] ohci_hcd 0000:00:13.0: intrstatus 0x00000000 [ 1.550073] ohci_hcd 0000:00:13.0: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.550085] ohci_hcd 0000:00:13.0: hcca frame #0000 [ 1.550090] ohci_hcd 0000:00:13.0: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.550095] ohci_hcd 0000:00:13.0: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.550100] ohci_hcd 0000:00:13.0: roothub.status 00008000 DRWE [ 1.550105] ohci_hcd 0000:00:13.0: roothub.portstatus [0] 0x00000100 PPS [ 1.550110] ohci_hcd 0000:00:13.0: roothub.portstatus [1] 0x00000100 PPS [ 1.550124] usb usb2: default language 0x0409 [ 1.550133] usb usb2: udev 1, busnum 2, minor = 128 [ 1.550136] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.550138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.550141] usb usb2: Product: OHCI Host Controller [ 1.550144] usb usb2: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd [ 1.550147] usb usb2: SerialNumber: 0000:00:13.0 [ 1.550276] usb usb2: usb_probe_device [ 1.550280] usb usb2: configuration #1 chosen from 1 choice [ 1.550289] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 1.550375] hub 2-0:1.0: usb_probe_interface [ 1.550377] hub 2-0:1.0: usb_probe_interface - got id [ 1.550380] hub 2-0:1.0: USB hub found [ 1.550389] hub 2-0:1.0: 2 ports detected [ 1.550391] hub 2-0:1.0: standalone hub [ 1.550393] hub 2-0:1.0: no power switching (usb 1.0) [ 1.550395] hub 2-0:1.0: global over-current protection [ 1.550398] hub 2-0:1.0: power on to power good time: 0ms [ 1.550404] hub 2-0:1.0: local power source is good [ 1.550406] hub 2-0:1.0: no over-current condition exists [ 1.550409] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 1.550473] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.0 [ 1.550503] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.550520] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.550527] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3 [ 1.555056] ohci_hcd 0000:00:13.1: created debug files [ 1.555058] ohci_hcd 0000:00:13.1: supports USB remote wakeup [ 1.555078] ohci_hcd 0000:00:13.1: irq 17, io mem 0xf8605000 [ 1.592050] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.592054] hub 1-0:1.0: port 6: status 0501 change 0001 [ 1.592065] ehci_hcd 0000:00:13.5: GetStatus port:7 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.592068] hub 1-0:1.0: port 7: status 0501 change 0001 [ 1.592078] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001803 0 ACK POWER sig=j CSC CONNECT [ 1.592082] hub 1-0:1.0: port 8: status 0501 change 0001 [ 1.595506] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L632H, TO01, max UDMA/33 [ 1.606046] ohci_hcd 0000:00:13.1: OHCI controller state [ 1.606051] ohci_hcd 0000:00:13.1: OHCI 1.0, NO legacy support registers [ 1.606058] ohci_hcd 0000:00:13.1: control 0x283 RWC HCFS=operational CBSR=3 [ 1.606063] ohci_hcd 0000:00:13.1: cmdstatus 0x00000 SOC=0 [ 1.606070] ohci_hcd 0000:00:13.1: intrstatus 0x00000000 [ 1.606074] ohci_hcd 0000:00:13.1: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.606086] ohci_hcd 0000:00:13.1: hcca frame #0000 [ 1.606091] ohci_hcd 0000:00:13.1: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.606095] ohci_hcd 0000:00:13.1: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.606100] ohci_hcd 0000:00:13.1: roothub.status 00008000 DRWE [ 1.606105] ohci_hcd 0000:00:13.1: roothub.portstatus [0] 0x00000100 PPS [ 1.606110] ohci_hcd 0000:00:13.1: roothub.portstatus [1] 0x00000100 PPS [ 1.606124] usb usb3: default language 0x0409 [ 1.606132] usb usb3: udev 1, busnum 3, minor = 256 [ 1.606135] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.606138] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.606141] usb usb3: Product: OHCI Host Controller [ 1.606144] usb usb3: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd [ 1.606146] usb usb3: SerialNumber: 0000:00:13.1 [ 1.606295] usb usb3: usb_probe_device [ 1.606299] usb usb3: configuration #1 chosen from 1 choice [ 1.606310] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 1.606394] hub 3-0:1.0: usb_probe_interface [ 1.606396] hub 3-0:1.0: usb_probe_interface - got id [ 1.606400] hub 3-0:1.0: USB hub found [ 1.606408] hub 3-0:1.0: 2 ports detected [ 1.606411] hub 3-0:1.0: standalone hub [ 1.606413] hub 3-0:1.0: no power switching (usb 1.0) [ 1.606415] hub 3-0:1.0: global over-current protection [ 1.606418] hub 3-0:1.0: power on to power good time: 0ms [ 1.606424] hub 3-0:1.0: local power source is good [ 1.606426] hub 3-0:1.0: no over-current condition exists [ 1.606429] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 1.606499] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.1 [ 1.606535] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.606557] ohci_hcd 0000:00:13.2: OHCI Host Controller [ 1.606564] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 1.611063] ohci_hcd 0000:00:13.2: created debug files [ 1.611066] ohci_hcd 0000:00:13.2: supports USB remote wakeup [ 1.611077] ohci_hcd 0000:00:13.2: irq 18, io mem 0xf8606000 [ 1.617447] ata5.00: configured for UDMA/33 [ 1.650067] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 1.662054] ohci_hcd 0000:00:13.2: OHCI controller state [ 1.662058] ohci_hcd 0000:00:13.2: OHCI 1.0, NO legacy support registers [ 1.662065] ohci_hcd 0000:00:13.2: control 0x283 RWC HCFS=operational CBSR=3 [ 1.662070] ohci_hcd 0000:00:13.2: cmdstatus 0x00000 SOC=0 [ 1.662075] ohci_hcd 0000:00:13.2: intrstatus 0x00000000 [ 1.662080] ohci_hcd 0000:00:13.2: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.662092] ohci_hcd 0000:00:13.2: hcca frame #0000 [ 1.662097] ohci_hcd 0000:00:13.2: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.662101] ohci_hcd 0000:00:13.2: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.662106] ohci_hcd 0000:00:13.2: roothub.status 00008000 DRWE [ 1.662111] ohci_hcd 0000:00:13.2: roothub.portstatus [0] 0x00000100 PPS [ 1.662116] ohci_hcd 0000:00:13.2: roothub.portstatus [1] 0x00000100 PPS [ 1.662130] usb usb4: default language 0x0409 [ 1.662138] usb usb4: udev 1, busnum 4, minor = 384 [ 1.662141] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.662144] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.662147] usb usb4: Product: OHCI Host Controller [ 1.662150] usb usb4: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd [ 1.662152] usb usb4: SerialNumber: 0000:00:13.2 [ 1.662296] usb usb4: usb_probe_device [ 1.662300] usb usb4: configuration #1 chosen from 1 choice [ 1.662310] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 1.662396] hub 4-0:1.0: usb_probe_interface [ 1.662399] hub 4-0:1.0: usb_probe_interface - got id [ 1.662402] hub 4-0:1.0: USB hub found [ 1.662411] hub 4-0:1.0: 2 ports detected [ 1.662413] hub 4-0:1.0: standalone hub [ 1.662415] hub 4-0:1.0: no power switching (usb 1.0) [ 1.662417] hub 4-0:1.0: global over-current protection [ 1.662420] hub 4-0:1.0: power on to power good time: 0ms [ 1.662425] hub 4-0:1.0: local power source is good [ 1.662428] hub 4-0:1.0: no over-current condition exists [ 1.662430] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 1.662502] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.2 [ 1.662538] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.662559] ohci_hcd 0000:00:13.3: OHCI Host Controller [ 1.662566] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5 [ 1.667054] ohci_hcd 0000:00:13.3: created debug files [ 1.667057] ohci_hcd 0000:00:13.3: supports USB remote wakeup [ 1.667068] ohci_hcd 0000:00:13.3: irq 17, io mem 0xf8607000 [ 1.692050] hub 1-0:1.0: state 7 ports 10 chg 01c0 evt 0000 [ 1.692064] hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s [ 1.718045] ohci_hcd 0000:00:13.3: OHCI controller state [ 1.718051] ohci_hcd 0000:00:13.3: OHCI 1.0, NO legacy support registers [ 1.718056] ohci_hcd 0000:00:13.3: control 0x283 RWC HCFS=operational CBSR=3 [ 1.718061] ohci_hcd 0000:00:13.3: cmdstatus 0x00000 SOC=0 [ 1.718067] ohci_hcd 0000:00:13.3: intrstatus 0x00000000 [ 1.718073] ohci_hcd 0000:00:13.3: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.718085] ohci_hcd 0000:00:13.3: hcca frame #0000 [ 1.718090] ohci_hcd 0000:00:13.3: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.718094] ohci_hcd 0000:00:13.3: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.718099] ohci_hcd 0000:00:13.3: roothub.status 00008000 DRWE [ 1.718104] ohci_hcd 0000:00:13.3: roothub.portstatus [0] 0x00000100 PPS [ 1.718109] ohci_hcd 0000:00:13.3: roothub.portstatus [1] 0x00000100 PPS [ 1.718121] usb usb5: default language 0x0409 [ 1.718133] usb usb5: udev 1, busnum 5, minor = 512 [ 1.718136] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.718139] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.718142] usb usb5: Product: OHCI Host Controller [ 1.718144] usb usb5: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd [ 1.718147] usb usb5: SerialNumber: 0000:00:13.3 [ 1.718297] usb usb5: usb_probe_device [ 1.718300] usb usb5: configuration #1 chosen from 1 choice [ 1.718309] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 1.718392] hub 5-0:1.0: usb_probe_interface [ 1.718395] hub 5-0:1.0: usb_probe_interface - got id [ 1.718398] hub 5-0:1.0: USB hub found [ 1.718406] hub 5-0:1.0: 2 ports detected [ 1.718408] hub 5-0:1.0: standalone hub [ 1.718410] hub 5-0:1.0: no power switching (usb 1.0) [ 1.718412] hub 5-0:1.0: global over-current protection [ 1.718415] hub 5-0:1.0: power on to power good time: 0ms [ 1.718421] hub 5-0:1.0: local power source is good [ 1.718424] hub 5-0:1.0: no over-current condition exists [ 1.718426] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 1.718497] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.3 [ 1.718527] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.718548] ohci_hcd 0000:00:13.4: OHCI Host Controller [ 1.718554] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6 [ 1.723058] ohci_hcd 0000:00:13.4: created debug files [ 1.723068] ohci_hcd 0000:00:13.4: irq 18, io mem 0xf8608000 [ 1.728050] ata2: SATA link down (SStatus 0 SControl 300) [ 1.728106] ata3: SATA link down (SStatus 0 SControl 300) [ 1.728141] ata4: SATA link down (SStatus 0 SControl 300) [ 1.743038] ehci_hcd 0000:00:13.5: port 6 high speed [ 1.743044] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.774048] ohci_hcd 0000:00:13.4: OHCI controller state [ 1.774054] ohci_hcd 0000:00:13.4: OHCI 1.0, NO legacy support registers [ 1.774059] ohci_hcd 0000:00:13.4: control 0x083 HCFS=operational CBSR=3 [ 1.774064] ohci_hcd 0000:00:13.4: cmdstatus 0x00000 SOC=0 [ 1.774070] ohci_hcd 0000:00:13.4: intrstatus 0x00000000 [ 1.774077] ohci_hcd 0000:00:13.4: intrenable 0x8000005a MIE RHSC UE RD WDH [ 1.774088] ohci_hcd 0000:00:13.4: hcca frame #0000 [ 1.774093] ohci_hcd 0000:00:13.4: roothub.a 00000202 POTPGT=0 NPS NDP=2(2) [ 1.774098] ohci_hcd 0000:00:13.4: roothub.b 00000000 PPCM=0000 DR=0000 [ 1.774102] ohci_hcd 0000:00:13.4: roothub.status 00008000 DRWE [ 1.774107] ohci_hcd 0000:00:13.4: roothub.portstatus [0] 0x00000100 PPS [ 1.774112] ohci_hcd 0000:00:13.4: roothub.portstatus [1] 0x00000100 PPS [ 1.774126] usb usb6: default language 0x0409 [ 1.774134] usb usb6: udev 1, busnum 6, minor = 640 [ 1.774137] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.774140] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.774143] usb usb6: Product: OHCI Host Controller [ 1.774145] usb usb6: Manufacturer: Linux 2.6.38-rc5-00100-g0cc9d52-dirty ohci_hcd [ 1.774148] usb usb6: SerialNumber: 0000:00:13.4 [ 1.774292] usb usb6: usb_probe_device [ 1.774296] usb usb6: configuration #1 chosen from 1 choice [ 1.774304] usb usb6: adding 6-0:1.0 (config #1, interface 0) [ 1.774389] hub 6-0:1.0: usb_probe_interface [ 1.774392] hub 6-0:1.0: usb_probe_interface - got id [ 1.774395] hub 6-0:1.0: USB hub found [ 1.774404] hub 6-0:1.0: 2 ports detected [ 1.774406] hub 6-0:1.0: standalone hub [ 1.774408] hub 6-0:1.0: no power switching (usb 1.0) [ 1.774410] hub 6-0:1.0: global over-current protection [ 1.774413] hub 6-0:1.0: power on to power good time: 0ms [ 1.774419] hub 6-0:1.0: local power source is good [ 1.774422] hub 6-0:1.0: no over-current condition exists [ 1.774424] hub 6-0:1.0: trying to enable port power on non-switchable hub [ 1.774506] ehci_hcd 0000:00:13.5: HS companion for 0000:00:13.4 [ 1.774597] uhci_hcd: USB Universal Host Controller Interface driver [ 1.774889] usbcore: registered new interface driver usblp [ 1.774891] Initializing USB Mass Storage driver... [ 1.774978] usbcore: registered new interface driver usb-storage [ 1.774980] USB Mass Storage support registered. [ 1.775086] usbcore: registered new interface driver libusual [ 1.775247] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12 [ 1.778234] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.778240] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.778576] mousedev: PS/2 mouse device common for all mice [ 1.779188] rtc_cmos 00:04: RTC can wake from S4 [ 1.782147] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0 [ 1.782178] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs [ 1.782243] i2c /dev entries driver [ 1.782814] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0x8410, revision 0 [ 1.783062] Linux video capture interface: v2.00 [ 1.783208] usbcore: registered new interface driver uvcvideo [ 1.783210] USB Video Class driver (v1.0.0) [ 1.783225] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141 [ 1.783381] Bluetooth: Virtual HCI driver ver 1.3 [ 1.783464] Bluetooth: HCI UART driver ver 2.2 [ 1.783467] Bluetooth: HCI H4 protocol initialized [ 1.783469] Bluetooth: HCI BCSP protocol initialized [ 1.783471] Bluetooth: HCILL protocol initialized [ 1.783473] Bluetooth: Broadcom Blutonium firmware driver ver 1.2 [ 1.783540] usbcore: registered new interface driver bcm203x [ 1.783543] Bluetooth: Digianswer Bluetooth USB driver ver 0.10 [ 1.783609] usbcore: registered new interface driver bpa10x [ 1.783612] Bluetooth: BlueFRITZ! USB driver ver 1.2 [ 1.783675] usbcore: registered new interface driver bfusb [ 1.783678] Bluetooth: Generic Bluetooth USB driver ver 0.6 [ 1.783745] usbcore: registered new interface driver btusb [ 1.783863] cpuidle: using governor ladder [ 1.783866] cpuidle: using governor menu [ 1.783932] sdhci: Secure Digital Host Controller Interface driver [ 1.783934] sdhci: Copyright(c) Pierre Ossman [ 1.783962] sdhci-pci 0000:14:06.1: SDHCI controller found [1180:0822] (rev 22) [ 1.783989] sdhci-pci 0000:14:06.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.785051] sdhci-pci 0000:14:06.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 1.785059] sdhci-pci 0000:14:06.1: setting latency timer to 64 [ 1.786195] Registered led device: mmc0:: [ 1.787357] mmc0: SDHCI controller on PCI [0000:14:06.1] using DMA [ 1.788487] usbcore: registered new interface driver usbhid [ 1.788490] usbhid: USB HID core driver [ 1.788493] zram: num_devices not specified. Using default: 1 [ 1.788495] zram: Creating 1 devices ... [ 1.789573] Detected Toshiba ACPI Bluetooth device - installing RFKill handler [ 1.795702] toshiba_bluetooth: Re-enabling Toshiba Bluetooth [ 1.799039] usb 1-6: new high speed USB device using ehci_hcd and address 2 [ 1.809996] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.814296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4 [ 1.851092] ehci_hcd 0000:00:13.5: port 6 high speed [ 1.851099] ehci_hcd 0000:00:13.5: GetStatus port:6 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1.852558] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) [ 1.852561] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 1.852563] hp_outs=1 (0x15/0x0/0x0/0x0/0x0) [ 1.852565] mono: mono_out=0x0 [ 1.852567] inputs: [ 1.852981] realtek: No valid SSID, checking pincfg 0x4015812d for NID 0x1d [ 1.852984] realtek: Enabling init ASM_ID=0x812d CODEC_ID=10ec0268 [ 1.855689] input: HDA ATI SB Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 1.855872] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 1.857037] ALSA device list: [ 1.857040] #0: HDA ATI SB at 0xf8600000 irq 16 [ 1.857043] Netfilter messages via NETLINK v0.30. [ 1.857065] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 1.857461] ctnetlink v0.93: registering with nfnetlink. [ 1.857636] ip_tables: (C) 2000-2006 Netfilter Core Team [ 1.857688] TCP cubic registered [ 1.857692] NET: Registered protocol family 17 [ 1.857755] Bluetooth: L2CAP ver 2.15 [ 1.857757] Bluetooth: L2CAP socket layer initialized [ 1.857762] Bluetooth: SCO (Voice Link) ver 0.6 [ 1.857764] Bluetooth: SCO socket layer initialized [ 1.857840] Bluetooth: RFCOMM TTY layer initialized [ 1.857855] Bluetooth: RFCOMM socket layer initialized [ 1.857858] Bluetooth: RFCOMM ver 1.11 [ 1.857860] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.857863] Bluetooth: BNEP filters: protocol multicast [ 1.857866] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.857976] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55 (2 cpu cores) (version 2.20.00) [ 1.858072] powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x13 [ 1.858074] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0x14 [ 1.858077] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x1a [ 1.915983] usb 1-6: default language 0x0409 [ 1.929235] usb 1-6: udev 2, busnum 1, minor = 1 [ 1.929238] usb 1-6: New USB device found, idVendor=0bda, idProduct=8197 [ 1.929241] usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 1.929245] usb 1-6: Manufacturer: Manufacturer_Realtek [ 1.929247] usb 1-6: SerialNumber: 00e04c000001 [ 1.929429] usb 1-6: usb_probe_device [ 1.929433] usb 1-6: configuration #1 chosen from 1 choice [ 1.930233] usb 1-6: adding 1-6:1.0 (config #1, interface 0) [ 1.941539] rtl8187 1-6:1.0: usb_probe_interface [ 1.941542] rtl8187 1-6:1.0: usb_probe_interface - got id [ 1.983166] firewire_core: created device fw0: GUID 00080da0d184f0e3, S400 [ 2.089026] ata1: softreset failed (device not ready) [ 2.089109] ata1: applying SB600 PMP SRST workaround and retrying [ 2.244043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.244874] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 2.245573] ieee80211 phy0: hwaddr 00:c0:a8:ff:54:49, RTL8187BvE V0 + rtl8225z2, rfkill mask 2 [ 2.267042] rtl8187: Customer ID is 0x04 [ 2.267141] Registered led device: rtl8187-phy0::radio [ 2.267221] Registered led device: rtl8187-phy0::tx [ 2.267297] Registered led device: rtl8187-phy0::rx [ 2.268038] rtl8187: wireless switch is on [ 2.268241] hub 1-0:1.0: port 7, status 0501, change 0000, 480 Mb/s [ 2.319035] ehci_hcd 0000:00:13.5: port 7 full speed --> companion [ 2.319041] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003801 0 ACK POWER OWNER sig=j CONNECT [ 2.319096] hub 1-0:1.0: port 7 not reset yet, waiting 50ms [ 2.370032] ehci_hcd 0000:00:13.5: GetStatus port:7 status 003002 0 ACK POWER OWNER sig=se0 CSC [ 2.370056] hub 1-0:1.0: port 8, status 0501, change 0000, 480 Mb/s [ 2.421053] ehci_hcd 0000:00:13.5: port 8 high speed [ 2.421058] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.432045] Synaptics Touchpad, model: 1, fw: 6.3, id: 0x9280b1, caps: 0xa04713/0x204000/0x0 [ 2.432052] synaptics: Toshiba Satellite A210 detected, limiting rate to 40pps. [ 2.466343] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7 [ 2.472036] usb 1-8: new high speed USB device using ehci_hcd and address 4 [ 2.523078] ehci_hcd 0000:00:13.5: port 8 high speed [ 2.523083] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 2.576736] ata1.00: ATA-7: TOSHIBA MK1237GSX, DL130M, max UDMA/100 [ 2.576739] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.576745] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.577667] ata1.00: SB600 AHCI: limiting to 255 sectors per cmd [ 2.577670] ata1.00: configured for UDMA/100 [ 2.577854] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1237GS DL13 PQ: 0 ANSI: 5 [ 2.578204] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.578253] sd 0:0:0:0: [sda] Write Protect is off [ 2.578256] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.578277] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.578315] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.582263] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L632H TO01 PQ: 0 ANSI: 5 [ 2.590291] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.590296] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.590532] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 2.590782] sr 4:0:0:0: Attached scsi generic sg1 type 5 [ 2.595331] usb 1-8: skipped 1 descriptor after configuration [ 2.595335] usb 1-8: skipped 5 descriptors after interface [ 2.595338] usb 1-8: skipped 1 descriptor after endpoint [ 2.595341] usb 1-8: skipped 10 descriptors after interface [ 2.595824] usb 1-8: default language 0x0409 [ 2.600449] usb 1-8: udev 4, busnum 1, minor = 3 [ 2.600452] usb 1-8: New USB device found, idVendor=04f2, idProduct=b008 [ 2.600455] usb 1-8: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 2.600458] usb 1-8: Product: Chicony USB 2.0 Camera [ 2.600460] usb 1-8: Manufacturer: Chicony Electronics Co., Ltd. [ 2.600462] usb 1-8: SerialNumber: SN0001 [ 2.600592] usb 1-8: usb_probe_device [ 2.600596] usb 1-8: configuration #1 chosen from 1 choice [ 2.600829] usb 1-8: adding 1-8:1.0 (config #1, interface 0) [ 2.601589] sda: sda1 sda2 sda3 sda4 [ 2.602351] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.602553] uvcvideo 1-8:1.0: usb_probe_interface [ 2.602558] uvcvideo 1-8:1.0: usb_probe_interface - got id [ 2.602577] uvcvideo: Found UVC 1.00 device Chicony USB 2.0 Camera (04f2:b008) [ 2.605805] input: Chicony USB 2.0 Camera as /devices/pci0000:00/0000:00:13.5/usb1/1-8/1-8:1.0/input/input8 [ 2.605927] usb 1-8: adding 1-8:1.1 (config #1, interface 1) [ 2.606072] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.606081] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 2.606086] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 2.606095] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00010101 CSC PPS CCS [ 2.606100] hub 5-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 2.625118] registered taskstats version 1 [ 2.665797] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 2.665814] VFS: Mounted root (ext2 filesystem) readonly on device 8:2. [ 2.666736] Freeing unused kernel memory: 440k freed [ 2.704036] ohci_hcd 0000:00:13.0: auto-stop root hub [ 2.704052] ohci_hcd 0000:00:13.1: auto-stop root hub [ 2.704066] ohci_hcd 0000:00:13.2: auto-stop root hub [ 2.710040] hub 5-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 2.731091] ohci_hcd 0000:00:13.3: port[0] reset timeout, stat 00000111 [ 2.782036] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 2.833046] usb 5-1: new full speed USB device using ohci_hcd and address 2 [ 2.860086] ohci_hcd 0000:00:13.3: port[0] reset timeout, stat 00000113 [ 2.911037] ohci_hcd 0000:00:13.3: GetStatus roothub.portstatus [0] = 0x00100103 PRSC PPS PES CCS [ 2.954050] ohci_hcd 0000:00:13.4: auto-stop root hub [ 3.007083] usb 5-1: skipped 1 descriptor after interface [ 3.007089] usb 5-1: udev 2, busnum 5, minor = 513 [ 3.007092] usb 5-1: New USB device found, idVendor=0930, idProduct=0508 [ 3.007095] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.007292] usb 5-1: usb_probe_device [ 3.007297] usb 5-1: configuration #1 chosen from 1 choice [ 3.010071] usb 5-1: adding 5-1:1.0 (config #1, interface 0) [ 3.010178] btusb 5-1:1.0: usb_probe_interface [ 3.010181] btusb 5-1:1.0: usb_probe_interface - got id [ 3.010533] usb 5-1: adding 5-1:1.1 (config #1, interface 1) [ 3.010653] usb 5-1: adding 5-1:1.2 (config #1, interface 2) [ 3.010752] btusb 5-1:1.2: usb_probe_interface [ 3.010755] btusb 5-1:1.2: usb_probe_interface - got id [ 3.010789] hub 6-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 3.010796] hub 1-0:1.0: state 7 ports 10 chg 0000 evt f880 [ 3.010812] hub 5-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 3.496562] firewire_net: firewire0: IPv4 over FireWire on device 00080da0d184f0e3 [ 3.496629] firewire_core: refreshed device fw0 [ 3.704036] hub 2-0:1.0: hub_suspend [ 3.704047] usb usb2: bus auto-suspend [ 3.704053] ohci_hcd 0000:00:13.0: suspend root hub [ 4.704046] usb 1-8: usb auto-suspend [ 4.704058] hub 3-0:1.0: hub_suspend [ 4.704066] usb usb3: bus auto-suspend [ 4.704070] ohci_hcd 0000:00:13.1: suspend root hub [ 4.704078] hub 4-0:1.0: hub_suspend [ 4.704082] usb usb4: bus auto-suspend [ 4.704085] ohci_hcd 0000:00:13.2: suspend root hub [ 5.712051] usb 5-1: usb auto-suspend [ 5.712062] hub 6-0:1.0: hub_suspend [ 5.712068] usb usb6: bus auto-suspend [ 5.712074] ohci_hcd 0000:00:13.4: suspend root hub [ 6.087998] udev[1173]: starting version 164 [ 6.421195] usb 1-8: usb auto-resume [ 6.447056] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 6.458034] usb 1-8: finish resume [ 6.459365] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 6.459456] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 7.723047] hub 5-0:1.0: hub_suspend [ 7.723057] usb usb5: bus auto-suspend [ 7.723063] ohci_hcd 0000:00:13.3: suspend root hub [ 8.704045] usb 1-8: usb auto-suspend [ 9.291304] EXT4-fs (sda2): re-mounted. Opts: (null) [ 9.478490] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 9.586738] Adding 2000088k swap on /dev/sda3. Priority:-1 extents:1 across:2000088k [ 14.944194] r8169 0000:08:00.0: eth0: link down [ 18.718486] ieee80211 phy0: device now idle [ 18.912963] ieee80211 phy0: device no longer idle - scanning [ 20.899280] ieee80211 phy0: device now idle [ 40.002325] ieee80211 phy0: device no longer idle - scanning [ 41.861325] ieee80211 phy0: device now idle [ 65.536833] start_kdeinit (2196): /proc/2196/oom_adj is deprecated, please use /proc/2196/oom_score_adj instead. [ 71.001633] ieee80211 phy0: device no longer idle - scanning [ 72.868465] ieee80211 phy0: device now idle [ 73.529789] EXT4-fs (sda4): re-mounted. Opts: commit=0 [ 81.400983] ieee80211 phy0: device no longer idle - scanning [ 83.262352] ieee80211 phy0: device now idle [ 83.367409] ieee80211 phy0: device no longer idle - working [ 83.431368] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 1) [ 83.631045] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 2) [ 83.831052] wlan0: authenticate with 00:25:86:d5:ba:d6 (try 3) [ 83.833173] wlan0: authenticated [ 83.833191] ieee80211 phy0: device now idle [ 83.884930] ieee80211 phy0: device no longer idle - working [ 83.936437] wlan0: associate with 00:25:86:d5:ba:d6 (try 1) [ 83.938444] wlan0: RX AssocResp from 00:25:86:d5:ba:d6 (capab=0x431 status=0 aid=23) [ 83.938447] wlan0: associated [ 83.938460] ieee80211 phy0: Allocated STA 00:25:86:d5:ba:d6 [ 83.938709] ieee80211 phy0: Inserted STA 00:25:86:d5:ba:d6 [ 104.839517] usb 1-8: usb auto-resume [ 104.865056] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 104.876038] usb 1-8: finish resume [ 104.877365] ehci_hcd 0000:00:13.5: reused qh ffff8800526a5b00 schedule [ 104.877373] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 104.895759] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 106.895080] usb 1-8: usb auto-suspend [ 521.272040] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 [ 648.704048] wlan0: detected beacon loss from AP - sending probe request [ 648.726127] wlan0: cancelling probereq poll due to a received beacon [ 963.284040] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 [ 1068.159606] CE: hpet increased min_delta_ns to 20113 nsec [ 1426.106090] usb 1-8: usb auto-resume [ 1426.132071] ehci_hcd 0000:00:13.5: GetStatus port:8 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 1426.143044] usb 1-8: finish resume [ 1426.144675] ehci_hcd 0000:00:13.5: reused qh ffff8800526a5b00 schedule [ 1426.144682] usb 1-8: link qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 1426.145429] usb 1-8: unlink qh4-0001/ffff8800526a5b00 start 1 [1/0 us] [ 1428.704087] usb 1-8: usb auto-suspend [ 1488.363033] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 [ 1731.769038] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 [ 2214.357034] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 [ 2336.426041] ieee80211 phy0: wlan0: No probe response from AP 00:25:86:d5:ba:d6 after 500ms, try 1 Any ideas what could I try or where is problem? Thanks David -- Jabber/XMPP: okias@xxxxxxxxxxx Skype: okiasxxx ICQ: 283-633-094 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
