RE:

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



 Hi,
>-----Original Message-----
>From: Sergei Shtylyov [mailto:sshtylyov@xxxxxxxxxx]
>Sent: Wednesday, February 16, 2011 5:31 PM
>To: Hema HK
>Cc: linux-usb@xxxxxxxxxxxxxxx; linux-omap@xxxxxxxxxxxxxxx
>Subject: Re:
>
>On 16-02-2011 14:53, Hema HK wrote:
>
>> From: Hema HK<hemahk@xxxxxx
>
>> Moved all the board specific internal PHY functions out of
>usb_musb.c file
>> as this file is shared between the OMAP2+ and AM35xx platforms.
>> There exists a file which has the functions specific to internal PHY
>> used for OMAP4 platform. Moved all phy specific functions to
>this file
>> and passing these functions through board data in the board file.
>
>> Signed-off-by: Hema HK<hemahk@xxxxxx>
>
>> Index: linux-2.6/arch/arm/mach-omap2/board-am3517evm.c
>> ===================================================================
>> --- linux-2.6.orig/arch/arm/mach-omap2/board-am3517evm.c
>> +++ linux-2.6/arch/arm/mach-omap2/board-am3517evm.c
>> @@ -409,6 +409,10 @@ static struct omap_musb_board_data musb_
>>   	.interface_type         = MUSB_INTERFACE_ULPI,
>>   	.mode                   = MUSB_OTG,
>>   	.power                  = 500,
>> +	.set_phy_power		= am35x_musb_phy_power,
>> +	.clear_irq		= am35x_musb_clear_irq,
>> +	.set_mode		= am35x_musb_set_mode,
>> +	.reset			= am35x_musb_reset,
>>   };
>>
>>   static __init void am3517_evm_musb_init(void)
>[...]
>> Index: linux-2.6/arch/arm/mach-omap2/Makefile
>> ===================================================================
>> --- linux-2.6.orig/arch/arm/mach-omap2/Makefile
>> +++ linux-2.6/arch/arm/mach-omap2/Makefile
>> @@ -218,7 +218,8 @@ obj-$(CONFIG_MACH_OMAP4_PANDA)		+= board
>>   					   hsmmc.o \
>>   					   omap_phy_internal.o
>>
>> -obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o
>> +obj-$(CONFIG_MACH_OMAP3517EVM)		+= board-am3517evm.o \
>> +					   omap_phy_internal.o \
>>
>>   obj-$(CONFIG_MACH_CRANEBOARD)		+= board-am3517crane.o
>
>    Doesn't the above board needs board data modified as well?

There is no "musb_board_data" for the above board file.

Regards,
Hema

>
>WBR, Sergei
>
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux