From: Tirumala Marri <tmarri@xxxxxxx> The PCD is responsible for translating requests from the gadget driver to appropriate actions on the DWC OTG controller. Signed-off-by: Tirumala R Marri <tmarri@xxxxxxx> Signed-off-by: Fushen Chen <fchen@xxxxxxx> Signed-off-by: Mark Miesfeld <mmiesfeld@xxxxxxx> --- drivers/usb/otg/dwc/pcd.c | 1765 +++++++++++++++++++++++++++++++++++++++++++++ drivers/usb/otg/dwc/pcd.h | 139 ++++ 2 files changed, 1904 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/otg/dwc/pcd.c create mode 100644 drivers/usb/otg/dwc/pcd.h diff --git a/drivers/usb/otg/dwc/pcd.c b/drivers/usb/otg/dwc/pcd.c new file mode 100644 index 0000000..5b07d9c --- /dev/null +++ b/drivers/usb/otg/dwc/pcd.c @@ -0,0 +1,1765 @@ +/* + * DesignWare HS OTG controller driver + * Copyright (C) 2006 Synopsys, Inc. + * Portions Copyright (C) 2010 Applied Micro Circuits Corporation. + * + * This program is free software: you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see http://www.gnu.org/licenses + * or write to the Free Software Foundation, Inc., 51 Franklin Street, + * Suite 500, Boston, MA 02110-1335 USA. + * + * Based on Synopsys driver version 2.60a + * Modified by Mark Miesfeld <mmiesfeld@xxxxxxx> + * Modified by Stefan Roese <sr@xxxxxxx>, DENX Software Engineering + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES + * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +/* + * This file implements the Peripheral Controller Driver. + * + * The Peripheral Controller Driver (PCD) is responsible for + * translating requests from the Function Driver into the appropriate + * actions on the DWC_otg controller. It isolates the Function Driver + * from the specifics of the controller by providing an API to the + * Function Driver. + * + * The Peripheral Controller Driver for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. + * (Gadget Driver is the Linux terminology for a Function Driver.) + * + * The Linux Gadget API is defined in the header file linux/usb/gadget.h. The + * USB EP operations API is defined in the structure usb_ep_ops and the USB + * Controller API is defined in the structure usb_gadget_ops + * + * An important function of the PCD is managing interrupts generated + * by the DWC_otg controller. The implementation of the DWC_otg device + * mode interrupt service routines is in dwc_otg_pcd_intr.c. + */ + +#include <linux/dma-mapping.h> +#include <linux/delay.h> + +#include "pcd.h" + +/* + * Static PCD pointer for use in usb_gadget_register_driver and + * usb_gadget_unregister_driver. Initialized in dwc_otg_pcd_init. + */ +static struct dwc_pcd *s_pcd; + +static inline int need_stop_srp_timer(struct core_if *core_if) +{ + if (core_if->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS || + !core_if->core_params->i2c_enable) + return core_if->srp_timer_started ? 1 : 0; + return 0; +} + +/** + * Tests if the module is set to FS or if the PHY_TYPE is FS. If so, then the + * gadget should not report as dual-speed capable. + */ +static inline int check_is_dual_speed(struct core_if *core_if) +{ + if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL || + (DWC_HWCFG2_HS_PHY_TYPE_RD(core_if->hwcfg2) == 2 && + DWC_HWCFG2_P_2_P_RD(core_if->hwcfg2) == 1 && + core_if->core_params->ulpi_fs_ls)) + return 0; + return 1; +} + +/** + * Tests if driver is OTG capable. + */ +static inline int check_is_otg(struct core_if *core_if) +{ + if (DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) == + DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE || + DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) == + DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST || + DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) == + DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE || + DWC_HWCFG2_OP_MODE_RD(core_if->hwcfg2) == + DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST) + return 0; + return 1; +} + +/** + * This function completes a request. It calls the request call back. + */ +void request_done(struct pcd_ep *ep, struct pcd_request *req, int status) +{ + unsigned stopped = ep->stopped; + + list_del_init(&req->queue); + if (req->req.status == -EINPROGRESS) + req->req.status = status; + else + status = req->req.status; + + if (GET_CORE_IF(ep->pcd)->dma_enable) { + if (req->mapped) { + dma_unmap_single(ep->pcd->gadget.dev.parent, + req->req.dma, req->req.length, + ep->dwc_ep.is_in ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->req.dma = DMA_ADDR_INVALID; + req->mapped = 0; + } else { + dma_sync_single_for_cpu(ep->pcd->gadget.dev.parent, + req->req.dma, req->req.length, + ep->dwc_ep. + is_in ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + } + } + + /* don't modify queue heads during completion callback */ + ep->stopped = 1; + spin_unlock(&ep->pcd->lock); + req->req.complete(&ep->ep, &req->req); + spin_lock(&ep->pcd->lock); + + if (ep->pcd->request_pending > 0) + --ep->pcd->request_pending; + ep->stopped = stopped; + + /* + * Added-sr: 2007-07-26 + * + * Finally, when the current request is done, mark this endpoint + * as not active, so that new requests can be processed. + */ + if (dwc_has_feature(GET_CORE_IF(ep->pcd), DWC_LIMITED_XFER)) + ep->dwc_ep.active = 0; +} + +/** + * This function terminates all the requsts in the EP request queue. + */ +void request_nuke(struct pcd_ep *ep) +{ + struct pcd_request *req; + + ep->stopped = 1; + + /* called with irqs blocked?? */ + while (!list_empty(&ep->queue)) { + req = list_entry(ep->queue.next, struct pcd_request, queue); + request_done(ep, req, -ESHUTDOWN); + } +} + +/* + * The following sections briefly describe the behavior of the Gadget + * API endpoint operations implemented in the DWC_otg driver + * software. Detailed descriptions of the generic behavior of each of + * these functions can be found in the Linux header file + * include/linux/usb_gadget.h. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper + * function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper + * functions. Within each section, the corresponding DWC_otg PCD + * function name is specified. + * + */ + +/** + * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO + * mode + */ +static u32 assign_perio_tx_fifo(struct core_if *core_if) +{ + u32 mask = 1; + u32 i; + + for (i = 0; i < DWC_HWCFG4_NUM_DEV_PERIO_IN_EP_RD(core_if->hwcfg4); + ++i) { + if (!(mask & core_if->p_tx_msk)) { + core_if->p_tx_msk |= mask; + return i + 1; + } + mask <<= 1; + } + return 0; +} + +/** + * This function releases periodic Tx FIFO in shared Tx FIFO mode + */ +static void release_perio_tx_fifo(struct core_if *core_if, u32 fifo_num) +{ + core_if->p_tx_msk = (core_if->p_tx_msk & (1 << (fifo_num - 1))) + ^ core_if->p_tx_msk; +} + +/** + * This function assigns periodic Tx FIFO to an periodic EP in shared Tx FIFO + * mode + */ +static u32 assign_tx_fifo(struct core_if *core_if) +{ + u32 mask = 1; + u32 i; + + for (i = 0; i < DWC_HWCFG4_NUM_IN_EPS_RD(core_if->hwcfg4); ++i) { + if (!(mask & core_if->tx_msk)) { + core_if->tx_msk |= mask; + return i + 1; + } + mask <<= 1; + } + return 0; +} + +/** + * This function releases periodic Tx FIFO in shared Tx FIFO mode + */ +static void release_tx_fifo(struct core_if *core_if, u32 fifo_num) +{ + core_if->tx_msk = (core_if->tx_msk & (1 << (fifo_num - 1))) + ^ core_if->tx_msk; +} + +/** + * Sets an in endpoint's tx fifo based on the hardware configuration. + */ +static void set_in_ep_tx_fifo(struct dwc_pcd *pcd, struct pcd_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + if (pcd->otg_dev->core_if->en_multiple_tx_fifo) { + ep->dwc_ep.tx_fifo_num = assign_tx_fifo(pcd->otg_dev->core_if); + } else { + ep->dwc_ep.tx_fifo_num = 0; + + /* If ISOC EP then assign a Periodic Tx FIFO. */ + if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC) + ep->dwc_ep.tx_fifo_num = + assign_perio_tx_fifo(pcd->otg_dev->core_if); + } +} + +/** + * This function activates an EP. The Device EP control register for + * the EP is configured as defined in the ep structure. Note: This function is + * not used for EP0. + */ +void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep) +{ + struct device_if *dev_if = core_if->dev_if; + u32 depctl = 0; + u32 addr; + u32 daintmsk = 0; + + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = (u32) dev_if->in_ep_regs[ep->num] + DWC_DIEPCTL; + daintmsk = DWC_DAINTMSK_IN_EP_RW(daintmsk, ep->num); + } else { + addr = (u32) dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL; + daintmsk = DWC_DAINTMSK_OUT_EP_RW(daintmsk, ep->num); + } + + /* If the EP is already active don't change the EP Control register */ + depctl = dwc_read32(addr); + if (!DWC_DEPCTL_ACT_EP_RD(depctl)) { + depctl = DWC_DEPCTL_MPS_RW(depctl, ep->maxpacket); + depctl = DWC_DEPCTL_EP_TYPE_RW(depctl, ep->type); + depctl = DWC_DEPCTL_TX_FIFO_NUM_RW(depctl, ep->tx_fifo_num); + depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1); + depctl = DWC_DEPCTL_ACT_EP_RW(depctl, 1); + dwc_write32(addr, depctl); + } + + /* Enable the Interrupt for this EP */ + dwc_modify32((u32) dev_if->dev_global_regs + DWC_DAINTMSK, 0, daintmsk); + + ep->stall_clear_flag = 0; +} + +/** + * This function is called by the Gadget Driver for each EP to be + * configured for the current configuration (SET_CONFIGURATION). + * + * This function initializes the dwc_otg_ep_t data structure, and then + * calls dwc_otg_ep_activate. + */ +static int dwc_otg_pcd_ep_enable(struct usb_ep *_ep, + const struct usb_endpoint_descriptor *desc) +{ + struct pcd_ep *ep; + struct dwc_pcd *pcd; + unsigned long flags; + + ep = container_of(_ep, struct pcd_ep, ep); + if (!_ep || !desc || ep->desc || desc->bDescriptorType != + USB_DT_ENDPOINT) { + pr_warning("%s, bad ep or descriptor\n", __func__); + return -EINVAL; + } + + if (ep == &ep->pcd->ep0) { + pr_warning("%s, bad ep(0)\n", __func__); + return -EINVAL; + } + + /* Check FIFO size */ + if (!desc->wMaxPacketSize) { + pr_warning("%s, bad %s maxpacket\n", __func__, _ep->name); + return -ERANGE; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + pr_warning("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&pcd->lock, flags); + ep->desc = desc; + ep->ep.maxpacket = le16_to_cpu(desc->wMaxPacketSize); + + /* Activate the EP */ + ep->stopped = 0; + ep->wedged = 0; + ep->dwc_ep.is_in = (USB_DIR_IN & desc->bEndpointAddress) != 0; + ep->dwc_ep.maxpacket = ep->ep.maxpacket; + ep->dwc_ep.type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + + if (ep->dwc_ep.is_in) + set_in_ep_tx_fifo(pcd, ep, desc); + + /* Set initial data PID. */ + if ((desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_BULK) + ep->dwc_ep.data_pid_start = 0; + + dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep); + spin_unlock_irqrestore(&pcd->lock, flags); + return 0; +} + +/** + * This function deactivates an EP. This is done by clearing the USB Active EP + * bit in the Device EP control register. Note: This function is not used for + * EP0. EP0 cannot be deactivated. + */ +static void dwc_otg_ep_deactivate(struct core_if *core_if, struct dwc_ep *ep) +{ + u32 depctl = 0; + u32 addr; + u32 daintmsk = 0; + + /* Read DEPCTLn register */ + if (ep->is_in == 1) { + addr = (u32) core_if->dev_if->in_ep_regs[ep->num] + DWC_DIEPCTL; + daintmsk = DWC_DAINTMSK_IN_EP_RW(daintmsk, ep->num); + } else { + addr = + (u32) core_if->dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL; + daintmsk = DWC_DAINTMSK_OUT_EP_RW(daintmsk, ep->num); + } + + depctl = DWC_DEPCTL_ACT_EP_RW(depctl, 0); + dwc_write32(addr, depctl); + + /* Disable the Interrupt for this EP */ + dwc_modify32((u32) core_if->dev_if->dev_global_regs + DWC_DAINTMSK, + daintmsk, 0); +} + +/** + * This function is called when an EP is disabled due to disconnect or + * change in configuration. Any pending requests will terminate with a + * status of -ESHUTDOWN. + * + * This function modifies the dwc_otg_ep_t data structure for this EP, + * and then calls dwc_otg_ep_deactivate. + */ +static int dwc_otg_pcd_ep_disable(struct usb_ep *_ep) +{ + struct pcd_ep *ep; + struct core_if *core_if; + unsigned long flags; + + ep = container_of(_ep, struct pcd_ep, ep); + if (!_ep || !ep->desc) + return -EINVAL; + + core_if = ep->pcd->otg_dev->core_if; + + spin_lock_irqsave(&ep->pcd->lock, flags); + + request_nuke(ep); + dwc_otg_ep_deactivate(core_if, &ep->dwc_ep); + + ep->desc = NULL; + ep->stopped = 1; + if (ep->dwc_ep.is_in) { + release_perio_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num); + release_tx_fifo(core_if, ep->dwc_ep.tx_fifo_num); + } + + spin_unlock_irqrestore(&ep->pcd->lock, flags); + + return 0; +} + +/** + * This function allocates a request object to use with the specified + * endpoint. + */ +static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *_ep, + gfp_t gfp_flags) +{ + struct pcd_request *req; + + if (!_ep) { + pr_warning("%s() Invalid EP\n", __func__); + return NULL; + } + + req = kzalloc(sizeof(struct pcd_request), gfp_flags); + if (!req) { + pr_warning("%s() request allocation failed\n", __func__); + return NULL; + } + + req->req.dma = DMA_ADDR_INVALID; + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +/** + * This function frees a request object. + */ +static void dwc_otg_pcd_free_request(struct usb_ep *_ep, + struct usb_request *_req) +{ + struct pcd_request *req; + + if (!_ep || !_req) { + pr_warning("%s() nvalid ep or req argument\n", __func__); + return; + } + + req = container_of(_req, struct pcd_request, req); + kfree(req); +} + +/* + * In dedicated Tx FIFO mode, enable the Non-Periodic Tx FIFO empty interrupt. + * Otherwise, enable the Tx FIFO epmty interrupt. The data will be written into + * the fifo by the ISR. + */ +static void enable_tx_fifo_empty_intr(struct core_if *c_if, struct dwc_ep *ep) +{ + u32 intr_mask = 0; + struct device_if *d_if = c_if->dev_if; + u32 global_regs = (u32) c_if->core_global_regs; + + if (!c_if->en_multiple_tx_fifo) { + intr_mask |= DWC_INTMSK_NP_TXFIFO_EMPT; + dwc_modify32(global_regs + DWC_GINTSTS, intr_mask, 0); + dwc_modify32(global_regs + DWC_GINTMSK, intr_mask, intr_mask); + } else if (ep->xfer_len) { + /* Enable the Tx FIFO Empty Interrupt for this EP */ + u32 fifoemptymsk = 1 << ep->num; + dwc_modify32((u32) d_if->dev_global_regs + + DWC_DTKNQR4FIFOEMPTYMSK, 0, fifoemptymsk); + } +} + +static void set_next_ep(struct device_if *dev_if, u8 num) +{ + u32 depctl = 0; + + depctl = dwc_read32((u32) dev_if->in_ep_regs[0]) + DWC_DIEPCTL; + depctl = DWC_DEPCTL_NXT_EP_RW(depctl, num); + + dwc_write32(((u32) dev_if->in_ep_regs[0]) + DWC_DIEPCTL, depctl); +} + +/** + * This function does the setup for a data transfer for an EP and + * starts the transfer. For an IN transfer, the packets will be loaded into the + * appropriate Tx FIFO in the ISR. For OUT transfers, the packets are unloaded + * from the Rx FIFO in the ISR. + * + */ +void dwc_otg_ep_start_transfer(struct core_if *c_if, struct dwc_ep *ep) +{ + u32 depctl = 0; + u32 deptsiz = 0; + struct device_if *d_if = c_if->dev_if; + u32 glbl_regs = (u32) c_if->core_global_regs; + + if (ep->is_in) { + u32 in_regs = (u32) d_if->in_ep_regs[ep->num]; + u32 gtxstatus; + + gtxstatus = dwc_read32(glbl_regs + DWC_GNPTXSTS); + if (!c_if->en_multiple_tx_fifo + && !DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(gtxstatus)) + return; + + depctl = dwc_read32((u32) in_regs + DWC_DIEPCTL); + deptsiz = dwc_read32((u32) in_regs + DWC_DIEPTSIZ); + + /* Zero Length Packet? */ + if (!ep->xfer_len) { + deptsiz = DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, 0); + deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, 1); + } else { + /* + * Program the transfer size and packet count as + * follows: + * + * xfersize = N * maxpacket + short_packet + * pktcnt = N + (short_packet exist ? 1 : 0) + */ + + /* + * Added-sr: 2007-07-26 + * + * Since the 405EZ (Ultra) only support 2047 bytes as + * max transfer size, we have to split up bigger + * transfers into multiple transfers of 1024 bytes sized + * messages. I happens often, that transfers of 4096 + * bytes are required (zero-gadget, + * file_storage-gadget). + */ + if (dwc_has_feature(c_if, DWC_LIMITED_XFER)) { + if (ep->xfer_len > MAX_XFER_LEN) { + ep->bytes_pending = ep->xfer_len + - MAX_XFER_LEN; + ep->xfer_len = MAX_XFER_LEN; + } + } + + deptsiz = + DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, ep->xfer_len); + deptsiz = + DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, + ((ep->xfer_len - 1 + + ep->maxpacket) / + ep->maxpacket)); + } + dwc_write32((u32) in_regs + DWC_DIEPTSIZ, deptsiz); + + if (c_if->dma_enable) + dwc_write32((u32) in_regs + DWC_DIEPDMA, ep->dma_addr); + else if (ep->type != DWC_OTG_EP_TYPE_ISOC) + enable_tx_fifo_empty_intr(c_if, ep); + + /* EP enable, IN data in FIFO */ + depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1); + depctl = DWC_DEPCTL_EPENA_RW(depctl, 1); + dwc_write32((u32) in_regs + DWC_DIEPCTL, depctl); + + if (c_if->dma_enable) + set_next_ep(d_if, ep->num); + } else { + u32 out_regs = (u32) d_if->out_ep_regs[ep->num]; + + depctl = dwc_read32(out_regs + DWC_DOEPCTL); + deptsiz = dwc_read32(out_regs + DWC_DOEPTSIZ); + + /* + * Program the transfer size and packet count as follows: + * + * pktcnt = N + * xfersize = N * maxpacket + */ + if (!ep->xfer_len) { + deptsiz = + DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, ep->maxpacket); + deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, 1); + } else { + deptsiz = DWC_DEPTSIZ_PKT_CNT_RW(deptsiz, + ((ep->xfer_len + + ep->maxpacket - + 1) / ep->maxpacket)); + deptsiz = + DWC_DEPTSIZ_XFER_SIZ_RW(deptsiz, + DWC_DEPTSIZ_PKT_CNT_RD + (deptsiz) * ep->maxpacket); + } + dwc_write32(out_regs + DWC_DOEPTSIZ, deptsiz); + + if (c_if->dma_enable) + dwc_write32(out_regs + DWC_DOEPDMA, ep->dma_addr); + + if (ep->type == DWC_OTG_EP_TYPE_ISOC) { + if (ep->even_odd_frame) + depctl = DWC_DEPCTL_SET_DATA1_PID_RW(depctl, 1); + else + depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1); + } + + /* EP enable */ + depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1); + depctl = DWC_DEPCTL_EPENA_RW(depctl, 1); + dwc_write32(out_regs + DWC_DOEPCTL, depctl); + } +} + +/** + * This function does the setup for a data transfer for EP0 and starts + * the transfer. For an IN transfer, the packets will be loaded into + * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are + * unloaded from the Rx FIFO in the ISR. + */ +void dwc_otg_ep0_start_transfer(struct core_if *c_if, struct dwc_ep *ep) +{ + u32 depctl = 0; + u32 deptsiz = 0; + struct device_if *d_if = c_if->dev_if; + u32 glbl_regs = (u32) c_if->core_global_regs; + + ep->total_len = ep->xfer_len; + + if (ep->is_in) { + u32 in_regs = (u32) d_if->in_ep_regs[0]; + u32 gtxstatus; + + gtxstatus = dwc_read32(glbl_regs + DWC_GNPTXSTS); + + if (!c_if->en_multiple_tx_fifo + && !DWC_GNPTXSTS_NPTXQSPCAVAIL_RD(gtxstatus)) + return; + + depctl = dwc_read32((u32) in_regs + DWC_DIEPCTL); + deptsiz = dwc_read32(in_regs + DWC_DIEPTSIZ); + + /* Zero Length Packet? */ + if (!ep->xfer_len) { + deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, 0); + deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1); + } else { + /* + * Program the transfer size and packet count as + * follows: + * + * xfersize = N * maxpacket + short_packet + * pktcnt = N + (short_packet exist ? 1 : 0) + */ + if (ep->xfer_len > ep->maxpacket) { + ep->xfer_len = ep->maxpacket; + deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, + ep-> + maxpacket); + } else { + deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, + ep-> + xfer_len); + } + deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1); + } + dwc_write32(in_regs + DWC_DIEPTSIZ, deptsiz); + + if (c_if->dma_enable) + dwc_write32(in_regs + DWC_DIEPDMA, ep->dma_addr); + + /* EP enable, IN data in FIFO */ + depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1); + depctl = DWC_DEPCTL_EPENA_RW(depctl, 1); + dwc_write32(in_regs + DWC_DIEPCTL, depctl); + + if (!c_if->dma_enable) + enable_tx_fifo_empty_intr(c_if, ep); + } else { + u32 out_regs = (u32) d_if->out_ep_regs[ep->num]; + + depctl = dwc_read32(out_regs + DWC_DOEPCTL); + deptsiz = dwc_read32(out_regs + DWC_DOEPTSIZ); + + /* + * Program the transfer size and packet count as follows: + * + * xfersize = N * (maxpacket + 4 - (maxpacket % 4)) + * pktcnt = N + */ + if (!ep->xfer_len) { + deptsiz = DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, + ep->maxpacket); + deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, 1); + } else { + deptsiz = DWC_DEPTSIZ0_PKT_CNT_RW(deptsiz, + (ep->xfer_len + + ep->maxpacket - + 1) / ep->maxpacket); + deptsiz = + DWC_DEPTSIZ0_XFER_SIZ_RW(deptsiz, + DWC_DEPTSIZ_PKT_CNT_RD + (deptsiz) * ep->maxpacket); + } + dwc_write32(out_regs + DWC_DOEPTSIZ, deptsiz); + + if (c_if->dma_enable) + dwc_write32(out_regs + DWC_DOEPDMA, ep->dma_addr); + + /* EP enable */ + depctl = DWC_DEPCTL_CLR_NAK_RW(depctl, 1); + depctl = DWC_DEPCTL_EPENA_RW(depctl, 1); + dwc_write32(out_regs + DWC_DOEPCTL, depctl); + } +} + +/** + * This function is used to submit an I/O Request to an EP. + * + * - When the request completes the request's completion callback + * is called to return the request to the driver. + * - An EP, except control EPs, may have multiple requests + * pending. + * - Once submitted the request cannot be examined or modified. + * - Each request is turned into one or more packets. + * - A BULK EP can queue any amount of data; the transfer is + * packetized. + * - Zero length Packets are specified with the request 'zero' + * flag. + */ +static int dwc_otg_pcd_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + int prevented = 0; + struct pcd_request *req; + struct pcd_ep *ep; + struct dwc_pcd *pcd; + struct core_if *core_if; + unsigned long flags = 0; + + req = container_of(_req, struct pcd_request, req); + if (!_req || !_req->complete || !_req->buf || + !list_empty(&req->queue)) { + pr_warning("%s, bad params\n", __func__); + return -EINVAL; + } + + ep = container_of(_ep, struct pcd_ep, ep); + if (!_ep || (!ep->desc && ep->dwc_ep.num != 0)) { + pr_warning("%s, bad ep\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + pr_warning("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + core_if = pcd->otg_dev->core_if; + + if (GET_CORE_IF(pcd)->dma_enable) { + if (_req->dma == DMA_ADDR_INVALID) { + _req->dma = dma_map_single(pcd->gadget.dev.parent, + _req->buf, _req->length, + ep->dwc_ep. + is_in ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 1; + } else { + dma_sync_single_for_device(pcd->gadget.dev.parent, + _req->dma, _req->length, + ep->dwc_ep. + is_in ? DMA_TO_DEVICE : + DMA_FROM_DEVICE); + req->mapped = 0; + } + } + + spin_lock_irqsave(&ep->pcd->lock, flags); + + _req->status = -EINPROGRESS; + _req->actual = 0; + + /* Start the transfer */ + if (list_empty(&ep->queue) && !ep->stopped) { + /* EP0 Transfer? */ + if (ep->dwc_ep.num == 0) { + switch (pcd->ep0state) { + case EP0_IN_DATA_PHASE: + break; + case EP0_OUT_DATA_PHASE: + if (pcd->request_config) { + /* Complete STATUS PHASE */ + ep->dwc_ep.is_in = 1; + pcd->ep0state = EP0_STATUS; + } + break; + default: + spin_unlock_irqrestore(&pcd->lock, flags); + return -EL2HLT; + } + + ep->dwc_ep.dma_addr = _req->dma; + ep->dwc_ep.start_xfer_buff = _req->buf; + ep->dwc_ep.xfer_buff = _req->buf; + ep->dwc_ep.xfer_len = _req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + + dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep); + } else { + /* Setup and start the Transfer */ + ep->dwc_ep.dma_addr = _req->dma; + ep->dwc_ep.start_xfer_buff = _req->buf; + ep->dwc_ep.xfer_buff = _req->buf; + ep->dwc_ep.xfer_len = _req->length; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = ep->dwc_ep.xfer_len; + + dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep); + } + } + + if (req || prevented) { + ++pcd->request_pending; + list_add_tail(&req->queue, &ep->queue); + + if (ep->dwc_ep.is_in && ep->stopped && !core_if->dma_enable) { + /* + * Device IN endpoint interrupt mask register is laid + * out exactly the same as the device IN endpoint + * interrupt register. + */ + u32 diepmsk = 0; + diepmsk = DWC_DIEPMSK_IN_TKN_TX_EMPTY_RW(diepmsk, 1); + + dwc_modify32((u32) core_if->dev_if->dev_global_regs + + DWC_DIEPMSK, 0, diepmsk); + } + } + + spin_unlock_irqrestore(&pcd->lock, flags); + return 0; +} + +/** + * This function cancels an I/O request from an EP. + */ +static int dwc_otg_pcd_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) +{ + struct pcd_request *req; + struct pcd_ep *ep; + struct dwc_pcd *pcd; + unsigned long flags; + + ep = container_of(_ep, struct pcd_ep, ep); + if (!_ep || !_req || (!ep->desc && ep->dwc_ep.num != 0)) { + pr_warning("%s, bad argument\n", __func__); + return -EINVAL; + } + + pcd = ep->pcd; + if (!pcd->driver || pcd->gadget.speed == USB_SPEED_UNKNOWN) { + pr_warning("%s, bogus device state\n", __func__); + return -ESHUTDOWN; + } + + spin_lock_irqsave(&pcd->lock, flags); + + /* make sure it's actually queued on this endpoint */ + list_for_each_entry(req, &ep->queue, queue) + if (&req->req == _req) + break; + + if (&req->req != _req) { + spin_unlock_irqrestore(&pcd->lock, flags); + return -EINVAL; + } + + if (!list_empty(&req->queue)) + request_done(ep, req, -ECONNRESET); + else + req = NULL; + + spin_unlock_irqrestore(&pcd->lock, flags); + + return req ? 0 : -EOPNOTSUPP; +} + +/** + * Set the EP STALL. + */ +void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep) +{ + u32 depctl = 0; + u32 depctl_addr; + + if (ep->is_in) { + depctl_addr = + ((u32) core_if->dev_if->in_ep_regs[ep->num]) + DWC_DIEPCTL; + depctl = dwc_read32(depctl_addr); + + /* set the disable and stall bits */ + if (DWC_DEPCTL_EPENA_RD(depctl)) + depctl = DWC_DEPCTL_EPDIS_RW(depctl, 1); + depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 1); + dwc_write32(depctl_addr, depctl); + } else { + depctl_addr = + ((u32) core_if->dev_if->out_ep_regs[ep->num] + DWC_DOEPCTL); + depctl = dwc_read32(depctl_addr); + + /* set the stall bit */ + depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 1); + dwc_write32(depctl_addr, depctl); + } +} + +/** + * Clear the EP STALL. + */ +void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep) +{ + u32 depctl = 0; + u32 depctl_addr; + + if (ep->is_in == 1) + depctl_addr = + ((u32) core_if->dev_if->in_ep_regs[ep->num]) + DWC_DIEPCTL; + else + depctl_addr = + ((u32) core_if->dev_if->out_ep_regs[ep->num]) + DWC_DOEPCTL; + + depctl = dwc_read32(depctl_addr); + + /* clear the stall bits */ + depctl = DWC_DEPCTL_STALL_HNDSHK_RW(depctl, 0); + + /* + * USB Spec 9.4.5: For endpoints using data toggle, regardless + * of whether an endpoint has the Halt feature set, a + * ClearFeature(ENDPOINT_HALT) request always results in the + * data toggle being reinitialized to DATA0. + */ + if (ep->type == DWC_OTG_EP_TYPE_INTR || + ep->type == DWC_OTG_EP_TYPE_BULK) + depctl = DWC_DEPCTL_SET_DATA0_PID_RW(depctl, 1); + + dwc_write32(depctl_addr, depctl); +} + +/** + * usb_ep_set_halt stalls an endpoint. + * + * usb_ep_clear_halt clears an endpoint halt and resets its data + * toggle. + * + * Both of these functions are implemented with the same underlying + * function. The behavior depends on the val argument: + * - 0 means clear_halt. + * - 1 means set_halt, + * - 2 means clear stall lock flag. + * - 3 means set stall lock flag. + */ +static int dwc_otg_pcd_ep_set_halt_wedge(struct usb_ep *_ep, int val, int wedged) +{ + int retval = 0; + unsigned long flags; + struct pcd_ep *ep; + + ep = container_of(_ep, struct pcd_ep, ep); + if (!_ep || (!ep->desc && ep != &ep->pcd->ep0) || + ep->desc->bmAttributes == USB_ENDPOINT_XFER_ISOC) { + pr_warning("%s, bad ep\n", __func__); + return -EINVAL; + } + + spin_lock_irqsave(&ep->pcd->lock, flags); + + if (ep->dwc_ep.is_in && !list_empty(&ep->queue)) { + pr_warning("%s() %s XFer In process\n", __func__, _ep->name); + retval = -EAGAIN; + } else if (val == 0) { + ep->wedged = 0; + dwc_otg_ep_clear_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep); + } else if (val == 1) { + if (ep->dwc_ep.num == 0) + ep->pcd->ep0state = EP0_STALL; + if (wedged) + ep->wedged = 1; + + ep->stopped = 1; + dwc_otg_ep_set_stall(ep->pcd->otg_dev->core_if, &ep->dwc_ep); + } else if (val == 2) { + ep->dwc_ep.stall_clear_flag = 0; + } else if (val == 3) { + ep->dwc_ep.stall_clear_flag = 1; + } + + spin_unlock_irqrestore(&ep->pcd->lock, flags); + return retval; +} +static int dwc_otg_pcd_ep_set_halt(struct usb_ep *_ep, int val) +{ + return dwc_otg_pcd_ep_set_halt_wedge(_ep, val, 0); +} +static int dwc_otg_pcd_ep_set_wedge(struct usb_ep *_ep) +{ + return dwc_otg_pcd_ep_set_halt_wedge(_ep, 1, 1); +} + +static struct usb_ep_ops dwc_otg_pcd_ep_ops = { + .enable = dwc_otg_pcd_ep_enable, + .disable = dwc_otg_pcd_ep_disable, + .alloc_request = dwc_otg_pcd_alloc_request, + .free_request = dwc_otg_pcd_free_request, + .queue = dwc_otg_pcd_ep_queue, + .dequeue = dwc_otg_pcd_ep_dequeue, + .set_halt = dwc_otg_pcd_ep_set_halt, + .set_wedge = dwc_otg_pcd_ep_set_wedge, + .fifo_status = NULL, + .fifo_flush = NULL, +}; + +/** + * Gets the current USB frame number from the DTS register. This is the frame + * number from the last SOF packet. + */ +static u32 dwc_otg_get_frame_number(struct core_if *core_if) +{ + u32 dsts; + + dsts = dwc_read32((u32) core_if->dev_if->dev_global_regs + DWC_DSTS); + return DWC_DSTS_SOFFN_RD(dsts); +} + +/** + * The following gadget operations will be implemented in the DWC_otg + * PCD. Functions in the API that are not described below are not + * implemented. + * + * The Gadget API provides wrapper functions for each of the function + * pointers defined in usb_gadget_ops. The Gadget Driver calls the + * wrapper function, which then calls the underlying PCD function. The + * following sections are named according to the wrapper functions + * (except for ioctl, which doesn't have a wrapper function). Within + * each section, the corresponding DWC_otg PCD function name is + * specified. + * + */ + +/** + *Gets the USB Frame number of the last SOF. + */ +static int dwc_otg_pcd_get_frame(struct usb_gadget *_gadget) +{ + if (!_gadget) { + return -ENODEV; + } else { + struct dwc_pcd *pcd; + + pcd = container_of(_gadget, struct dwc_pcd, gadget); + dwc_otg_get_frame_number(GET_CORE_IF(pcd)); + } + + return 0; +} + +/** + * This function is called when the SRP timer expires. The SRP should complete + * within 6 seconds. + */ +static void srp_timeout(unsigned long data) +{ + u32 gotgctl; + struct dwc_pcd *pcd = (struct dwc_pcd *)data; + struct core_if *core_if = pcd->otg_dev->core_if; + u32 addr = otg_ctl_reg(pcd); + + gotgctl = dwc_read32(addr); + core_if->srp_timer_started = 0; + + if (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS && + core_if->core_params->i2c_enable) { + pr_info("SRP Timeout\n"); + + if (core_if->srp_success && (gotgctl & + DWC_GCTL_BSESSION_VALID)) { + if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) + core_if->pcd_cb->resume_wakeup(core_if->pcd_cb-> + p); + + /* Clear Session Request */ + gotgctl = 0; + gotgctl |= DWC_GCTL_SES_REQ; + dwc_modify32(addr, gotgctl, 0); + + core_if->srp_success = 0; + } else { + pr_err("Device not connected/responding\n"); + gotgctl &= ~DWC_GCTL_SES_REQ; + dwc_write32(addr, gotgctl); + } + } else if (gotgctl & DWC_GCTL_SES_REQ) { + pr_info("SRP Timeout\n"); + pr_err("Device not connected/responding\n"); + + gotgctl &= ~DWC_GCTL_SES_REQ; + dwc_write32(addr, gotgctl); + } else { + pr_info(" SRP GOTGCTL=%0x\n", gotgctl); + } +} + +/** + * Start the SRP timer to detect when the SRP does not complete within + * 6 seconds. + */ +static void dwc_otg_pcd_start_srp_timer(struct dwc_pcd *pcd) +{ + struct timer_list *srp_timer = &pcd->srp_timer; + + GET_CORE_IF(pcd)->srp_timer_started = 1; + init_timer(srp_timer); + srp_timer->function = srp_timeout; + srp_timer->data = (unsigned long)pcd; + srp_timer->expires = jiffies + (HZ * 6); + + add_timer(srp_timer); +} + +static void dwc_otg_pcd_initiate_srp(struct dwc_pcd *pcd) +{ + u32 mem; + u32 val; + u32 addr = otg_ctl_reg(pcd); + + val = dwc_read32(addr); + if (val & DWC_GCTL_SES_REQ) { + pr_err("Session Request Already active!\n"); + return; + } + + pr_notice("Session Request Initated\n"); + mem = dwc_read32(addr); + mem |= DWC_GCTL_SES_REQ; + dwc_write32(addr, mem); + + /* Start the SRP timer */ + dwc_otg_pcd_start_srp_timer(pcd); + return; +} + +static void dwc_otg_pcd_remote_wakeup(struct dwc_pcd *pcd, int set) +{ + u32 dctl = 0; + u32 addr = dev_ctl_reg(pcd); + + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) { + if (pcd->remote_wakeup_enable) { + if (set) { + dctl = DEC_DCTL_REMOTE_WAKEUP_SIG(dctl, 1); + dwc_modify32(addr, 0, dctl); + msleep(20); + dwc_modify32(addr, dctl, 0); + } + } + } +} + +/** + * Initiates Session Request Protocol (SRP) to wakeup the host if no + * session is in progress. If a session is already in progress, but + * the device is suspended, remote wakeup signaling is started. + * + */ +static int dwc_otg_pcd_wakeup(struct usb_gadget *_gadget) +{ + unsigned long flags; + struct dwc_pcd *pcd; + u32 dsts; + u32 gotgctl; + + if (!_gadget) + return -ENODEV; + else + pcd = container_of(_gadget, struct dwc_pcd, gadget); + + spin_lock_irqsave(&pcd->lock, flags); + + /* + * This function starts the Protocol if no session is in progress. If + * a session is already in progress, but the device is suspended, + * remote wakeup signaling is started. + */ + + /* Check if valid session */ + gotgctl = dwc_read32(otg_ctl_reg(pcd)); + if (gotgctl & DWC_GCTL_BSESSION_VALID) { + /* Check if suspend state */ + dsts = dwc_read32(dev_sts_reg(pcd)); + if (DWC_DSTS_SUSP_STS_RD(dsts)) + dwc_otg_pcd_remote_wakeup(pcd, 1); + } else { + dwc_otg_pcd_initiate_srp(pcd); + } + + spin_unlock_irqrestore(&pcd->lock, flags); + return 0; +} + +static const struct usb_gadget_ops dwc_otg_pcd_ops = { + .get_frame = dwc_otg_pcd_get_frame, + .wakeup = dwc_otg_pcd_wakeup, + /* not selfpowered */ +}; + +/** + * This function updates the otg values in the gadget structure. + */ +void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset) +{ + if (!pcd->gadget.is_otg) + return; + + if (reset) { + pcd->b_hnp_enable = 0; + pcd->a_hnp_support = 0; + pcd->a_alt_hnp_support = 0; + } + + pcd->gadget.b_hnp_enable = pcd->b_hnp_enable; + pcd->gadget.a_hnp_support = pcd->a_hnp_support; + pcd->gadget.a_alt_hnp_support = pcd->a_alt_hnp_support; +} + +/** + * This function is the top level PCD interrupt handler. + */ +static irqreturn_t dwc_otg_pcd_irq(int _irq, void *dev) +{ + struct dwc_pcd *pcd = dev; + int retval; + + retval = dwc_otg_pcd_handle_intr(pcd); + return IRQ_RETVAL(retval); +} + +/** + * PCD Callback function for initializing the PCD when switching to + * device mode. + */ +static int dwc_otg_pcd_start_cb(void *_p) +{ + struct dwc_pcd *pcd = (struct dwc_pcd *)_p; + + /* Initialize the Core for Device mode. */ + if (dwc_otg_is_device_mode(GET_CORE_IF(pcd))) + dwc_otg_core_dev_init(GET_CORE_IF(pcd)); + + return 1; +} + +/** + * PCD Callback function for stopping the PCD when switching to Host + * mode. + */ +static int dwc_otg_pcd_stop_cb(void *_p) +{ + dwc_otg_pcd_stop((struct dwc_pcd *)_p); + return 1; +} + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + * + * @param _p void pointer to the <code>struct dwc_pcd</code> + */ +static int dwc_otg_pcd_suspend_cb(void *_p) +{ + struct dwc_pcd *pcd = (struct dwc_pcd *)_p; + + if (pcd->driver && pcd->driver->suspend) { + spin_unlock(&pcd->lock); + pcd->driver->suspend(&pcd->gadget); + spin_lock(&pcd->lock); + } + return 1; +} + +/** + * PCD Callback function for notifying the PCD when resuming from + * suspend. + */ +static int dwc_otg_pcd_resume_cb(void *_p) +{ + struct dwc_pcd *pcd = (struct dwc_pcd *)_p; + struct core_if *core_if = pcd->otg_dev->core_if; + + if (pcd->driver && pcd->driver->resume) { + spin_unlock(&pcd->lock); + pcd->driver->resume(&pcd->gadget); + spin_lock(&pcd->lock); + } + + /* Maybe stop the SRP timeout timer. */ + if (need_stop_srp_timer(core_if)) { + core_if->srp_timer_started = 0; + del_timer_sync(&pcd->srp_timer); + } + return 1; +} + +/** + * PCD Callback structure for handling mode switching. + */ +static struct cil_callbacks pcd_callbacks = { + .start = dwc_otg_pcd_start_cb, + .stop = dwc_otg_pcd_stop_cb, + .suspend = dwc_otg_pcd_suspend_cb, + .resume_wakeup = dwc_otg_pcd_resume_cb, + .p = NULL, /* Set at registration */ +}; + +/** + * Tasklet + * + */ +static void start_xfer_tasklet_func(unsigned long data) +{ + struct dwc_pcd *pcd = (struct dwc_pcd *)data; + u32 diepctl = 0; + int num = pcd->otg_dev->core_if->dev_if->num_in_eps; + u32 i; + unsigned long flags; + + spin_lock_irqsave(&pcd->lock, flags); + diepctl = dwc_read32(in_ep_ctl_reg(pcd, 0)); + + if (pcd->ep0.queue_sof) { + pcd->ep0.queue_sof = 0; + start_next_request(&pcd->ep0); + } + + for (i = 0; i < num; i++) { + u32 diepctl = 0; + + diepctl = dwc_read32(in_ep_ctl_reg(pcd, i)); + if (pcd->in_ep[i].queue_sof) { + pcd->in_ep[i].queue_sof = 0; + start_next_request(&pcd->in_ep[i]); + } + } + spin_unlock_irqrestore(&pcd->lock, flags); +} + +static struct tasklet_struct start_xfer_tasklet = { + .next = NULL, + .state = 0, + .count = ATOMIC_INIT(0), + .func = start_xfer_tasklet_func, + .data = 0, +}; + +/** + * This function initialized the pcd Dp structures to there default + * state. + */ +static void __devinit dwc_otg_pcd_reinit(struct dwc_pcd *pcd) +{ + static const char *names[] = { + "ep0", "ep1in", "ep2in", "ep3in", "ep4in", "ep5in", + "ep6in", "ep7in", "ep8in", "ep9in", "ep10in", "ep11in", + "ep12in", "ep13in", "ep14in", "ep15in", "ep1out", "ep2out", + "ep3out", "ep4out", "ep5out", "ep6out", "ep7out", "ep8out", + "ep9out", "ep10out", "ep11out", "ep12out", "ep13out", + "ep14out", "ep15out" + }; + u32 i; + int in_ep_cntr, out_ep_cntr; + u32 hwcfg1; + u32 num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps; + u32 num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps; + struct pcd_ep *ep; + + INIT_LIST_HEAD(&pcd->gadget.ep_list); + pcd->gadget.ep0 = &pcd->ep0.ep; + pcd->gadget.speed = USB_SPEED_UNKNOWN; + INIT_LIST_HEAD(&pcd->gadget.ep0->ep_list); + + /* Initialize the EP0 structure. */ + ep = &pcd->ep0; + + /* Init EP structure */ + ep->desc = NULL; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.num = 0; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = NULL; + ep->dwc_ep.xfer_buff = NULL; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + /* Init the usb_ep structure. */ + ep->ep.name = names[0]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + + /* Initialize the EP structures. */ + in_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1 >> 3; + + for (i = 1; in_ep_cntr < num_in_eps; i++) { + if (!(hwcfg1 & 0x1)) { + struct pcd_ep *ep = &pcd->in_ep[in_ep_cntr]; + + in_ep_cntr++; + /* Init EP structure */ + ep->desc = NULL; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 1; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = NULL; + ep->dwc_ep.xfer_buff = NULL; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + ep->ep.name = names[i]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + } + hwcfg1 >>= 2; + } + + out_ep_cntr = 0; + hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1 >> 2; + for (i = 1; out_ep_cntr < num_out_eps; i++) { + if (!(hwcfg1 & 0x1)) { + struct pcd_ep *ep = &pcd->out_ep[out_ep_cntr]; + + out_ep_cntr++; + /* Init EP structure */ + ep->desc = NULL; + ep->pcd = pcd; + ep->stopped = 1; + + /* Init DWC ep structure */ + ep->dwc_ep.is_in = 0; + ep->dwc_ep.num = i; + ep->dwc_ep.active = 0; + ep->dwc_ep.tx_fifo_num = 0; + + /* Control until ep is actvated */ + ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; + ep->dwc_ep.maxpacket = MAX_PACKET_SIZE; + ep->dwc_ep.dma_addr = 0; + ep->dwc_ep.start_xfer_buff = NULL; + ep->dwc_ep.xfer_buff = NULL; + ep->dwc_ep.xfer_len = 0; + ep->dwc_ep.xfer_count = 0; + ep->dwc_ep.sent_zlp = 0; + ep->dwc_ep.total_len = 0; + ep->queue_sof = 0; + + ep->ep.name = names[15 + i]; + ep->ep.ops = &dwc_otg_pcd_ep_ops; + + ep->ep.maxpacket = MAX_PACKET_SIZE; + list_add_tail(&ep->ep.ep_list, &pcd->gadget.ep_list); + INIT_LIST_HEAD(&ep->queue); + } + hwcfg1 >>= 2; + } + + /* remove ep0 from the list. There is a ep0 pointer. */ + list_del_init(&pcd->ep0.ep.ep_list); + + pcd->ep0state = EP0_DISCONNECT; + pcd->ep0.ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE; + pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL; +} + +/** + * This function releases the Gadget device. + * required by device_unregister(). + */ +static void dwc_otg_pcd_gadget_release(struct device *dev) +{ + pr_info("%s(%p)\n", __func__, dev); +} + +/** + * Allocates the buffers for the setup packets when the PCD portion of the + * driver is first initialized. + */ +static int __devinit init_pkt_buffs(struct device *dev, struct dwc_pcd *pcd) +{ + if (pcd->otg_dev->core_if->dma_enable) { + pcd->dwc_pool = dma_pool_create("dwc_otg_pcd", dev, + sizeof(*pcd->setup_pkt) * 5, 32, + 0); + if (!pcd->dwc_pool) + return -ENOMEM; + pcd->setup_pkt = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL, + &pcd->setup_pkt_dma_handle); + if (!pcd->setup_pkt) + goto error; + pcd->status_buf = dma_pool_alloc(pcd->dwc_pool, GFP_KERNEL, + &pcd->status_buf_dma_handle); + if (!pcd->status_buf) + goto error1; + } else { + pcd->setup_pkt = kmalloc(sizeof(*pcd->setup_pkt) * 5, + GFP_KERNEL); + if (!pcd->setup_pkt) + return -ENOMEM; + pcd->status_buf = kmalloc(sizeof(u16), GFP_KERNEL); + if (!pcd->status_buf) { + kfree(pcd->setup_pkt); + return -ENOMEM; + } + } + return 0; + +error1: + dma_pool_free(pcd->dwc_pool, pcd->setup_pkt, pcd->setup_pkt_dma_handle); +error: + dma_pool_destroy(pcd->dwc_pool); + return -ENOMEM; +} + +/** + * This function initializes the PCD portion of the driver. + */ +int __devinit dwc_otg_pcd_init(struct device *dev) +{ + static const char pcd_name[] = "dwc_otg_pcd"; + struct dwc_pcd *pcd; + struct dwc_otg_device *otg_dev = dev_get_drvdata(dev); + struct core_if *core_if = otg_dev->core_if; + int retval; + + /* Allocate PCD structure */ + pcd = kzalloc(sizeof(*pcd), GFP_KERNEL); + if (!pcd) { + retval = -ENOMEM; + goto err; + } + + spin_lock_init(&pcd->lock); + + otg_dev->pcd = pcd; + s_pcd = pcd; + pcd->gadget.name = pcd_name; + + dev_set_name(&pcd->gadget.dev, "gadget"); + pcd->otg_dev = otg_dev; + pcd->gadget.dev.parent = dev; + pcd->gadget.dev.release = dwc_otg_pcd_gadget_release; + pcd->gadget.ops = &dwc_otg_pcd_ops; + + if (DWC_HWCFG4_DED_FIFO_ENA_RD(core_if->hwcfg4)) + pr_info("Dedicated Tx FIFOs mode\n"); + else + pr_info("Shared Tx FIFO mode\n"); + + pcd->gadget.is_dualspeed = check_is_dual_speed(core_if); + pcd->gadget.is_otg = check_is_otg(core_if); + + /* Register the gadget device */ + retval = device_register(&pcd->gadget.dev); + + /* Initialized the Core for Device mode. */ + if (dwc_otg_is_device_mode(core_if)) + dwc_otg_core_dev_init(core_if); + + /* Initialize EP structures */ + dwc_otg_pcd_reinit(pcd); + + /* Register the PCD Callbacks. */ + dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd); + + /* Setup interupt handler */ + retval = request_irq(otg_dev->irq, dwc_otg_pcd_irq, IRQF_SHARED, + pcd->gadget.name, pcd); + if (retval) { + pr_err("request of irq%d failed\n", otg_dev->irq); + retval = -EBUSY; + goto err_cleanup; + } + + /* Initialize the DMA buffer for SETUP packets */ + retval = init_pkt_buffs(dev, pcd); + if (retval) + goto err_cleanup; + + /* Initialize tasklet */ + start_xfer_tasklet.data = (unsigned long)pcd; + pcd->start_xfer_tasklet = &start_xfer_tasklet; + return 0; + +err_cleanup: + kfree(pcd); + otg_dev->pcd = NULL; + s_pcd = NULL; + +err: + return retval; +} + +/** + * Cleanup the PCD. + */ +void __devexit dwc_otg_pcd_remove(struct device *dev) +{ + struct dwc_otg_device *otg_dev = dev_get_drvdata(dev); + struct dwc_pcd *pcd = otg_dev->pcd; + + /* Free the IRQ */ + free_irq(otg_dev->irq, pcd); + + /* start with the driver above us */ + if (pcd->driver) { + /* should have been done already by driver model core */ + pr_warning("driver '%s' is still registered\n", + pcd->driver->driver.name); + usb_gadget_unregister_driver(pcd->driver); + } + if (pcd->start_xfer_tasklet) + tasklet_kill(pcd->start_xfer_tasklet); + tasklet_kill(&pcd->test_mode_tasklet); + + device_unregister(&pcd->gadget.dev); + if (GET_CORE_IF(pcd)->dma_enable) { + dma_pool_free(pcd->dwc_pool, pcd->setup_pkt, + pcd->setup_pkt_dma_handle); + dma_pool_free(pcd->dwc_pool, pcd->status_buf, + pcd->status_buf_dma_handle); + dma_pool_destroy(pcd->dwc_pool); + } else { + kfree(pcd->setup_pkt); + kfree(pcd->status_buf); + } + kfree(pcd); + otg_dev->pcd = NULL; +} + +/** + * This function registers a gadget driver with the PCD. + * + * When a driver is successfully registered, it will receive control + * requests including set_configuration(), which enables non-control + * requests. then usb traffic follows until a disconnect is reported. + * then a host may connect again, or the driver might get unbound. + */ +int usb_gadget_probe_driver(struct usb_gadget_driver *driver, + int (*bind) (struct usb_gadget *)) +{ + int retval; + + if (!driver || driver->speed == USB_SPEED_UNKNOWN || !bind || + !driver->unbind || !driver->disconnect || !driver->setup) + return -EINVAL; + + if (s_pcd == NULL) + return -ENODEV; + + if (s_pcd->driver != NULL) + return -EBUSY; + + /* hook up the driver */ + s_pcd->driver = driver; + s_pcd->gadget.dev.driver = &driver->driver; + + retval = bind(&s_pcd->gadget); + if (retval) { + struct core_if *core_if; + + pr_err("bind to driver %s --> error %d\n", + driver->driver.name, retval); + core_if = s_pcd->otg_dev->core_if; + otg_set_peripheral(core_if->xceiv, &s_pcd->gadget); + s_pcd->driver = NULL; + s_pcd->gadget.dev.driver = NULL; + return retval; + } + return 0; +} +EXPORT_SYMBOL(usb_gadget_probe_driver); + +/** + * This function unregisters a gadget driver + */ +int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) +{ + struct core_if *core_if; + + if (!s_pcd) + return -ENODEV; + if (!driver || driver != s_pcd->driver) + return -EINVAL; + + core_if = s_pcd->otg_dev->core_if; + core_if->xceiv->state = OTG_STATE_UNDEFINED; + otg_set_peripheral(core_if->xceiv, NULL); + + driver->unbind(&s_pcd->gadget); + s_pcd->driver = NULL; + + return 0; +} +EXPORT_SYMBOL(usb_gadget_unregister_driver); diff --git a/drivers/usb/otg/dwc/pcd.h b/drivers/usb/otg/dwc/pcd.h new file mode 100644 index 0000000..e6d97c2 --- /dev/null +++ b/drivers/usb/otg/dwc/pcd.h @@ -0,0 +1,139 @@ +/* + * DesignWare HS OTG controller driver + * Copyright (C) 2006 Synopsys, Inc. + * Portions Copyright (C) 2010 Applied Micro Circuits Corporation. + * + * This program is free software: you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License version 2 for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see http://www.gnu.org/licenses + * or write to the Free Software Foundation, Inc., 51 Franklin Street, + * Suite 500, Boston, MA 02110-1335 USA. + * + * Based on Synopsys driver version 2.60a + * Modified by Mark Miesfeld <mmiesfeld@xxxxxxx> + * Modified by Stefan Roese <sr@xxxxxxx>, DENX Software Engineering + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL SYNOPSYS, INC. BE LIABLE FOR ANY DIRECT, + * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES + * (INCLUDING BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + */ + +#if !defined(__DWC_PCD_H__) +#define __DWC_PCD_H__ + +#include "driver.h" + +/* + * This file contains the structures, constants, and interfaces for + * the Perpherial Contoller Driver (PCD). + * + * The Peripheral Controller Driver (PCD) for Linux will implement the + * Gadget API, so that the existing Gadget drivers can be used. For + * the Mass Storage Function driver the File-backed USB Storage Gadget + * (FBS) driver will be used. The FBS driver supports the + * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only + * transports. + * + */ + +/* Invalid DMA Address */ +#define DMA_ADDR_INVALID (~(dma_addr_t) 0) +/* Maxpacket size for EP0 */ +#define MAX_EP0_SIZE 64 +/* Maxpacket size for any EP */ +#define MAX_PACKET_SIZE 1024 + +/* + * Get the pointer to the core_if from the pcd pointer. + */ +#define GET_CORE_IF(_pcd) (_pcd->otg_dev->core_if) + +/* + * DWC_otg request structure. + * This structure is a list of requests. + */ +struct pcd_request { + struct usb_request req; /* USB Request. */ + struct list_head queue; /* queue of these requests. */ + unsigned mapped:1; +}; + +static inline u32 in_ep_int_reg(struct dwc_pcd *pd, int i) +{ + return (u32) GET_CORE_IF(pd)->dev_if->in_ep_regs[i] + DWC_DIEPINT; +} +static inline u32 out_ep_int_reg(struct dwc_pcd *pd, int i) +{ + return (u32) GET_CORE_IF(pd)->dev_if->out_ep_regs[i] + DWC_DOEPINT; +} +static inline u32 in_ep_ctl_reg(struct dwc_pcd *pd, int i) +{ + return (u32) GET_CORE_IF(pd)->dev_if->in_ep_regs[i] + DWC_DIEPCTL; +} + +static inline u32 out_ep_ctl_reg(struct dwc_pcd *pd, int i) +{ + return (u32) GET_CORE_IF(pd)->dev_if->out_ep_regs[i] + DWC_DOEPCTL; +} + +static inline u32 dev_ctl_reg(struct dwc_pcd *pd) +{ + return (u32) ((u32) GET_CORE_IF(pd)->dev_if->dev_global_regs + + DWC_DCTL); +} + +static inline u32 dev_diepmsk_reg(struct dwc_pcd *pd) +{ + return (u32) ((u32) GET_CORE_IF(pd)->dev_if->dev_global_regs + + DWC_DIEPMSK); +} + +static inline u32 dev_sts_reg(struct dwc_pcd *pd) +{ + return (u32) ((u32) GET_CORE_IF(pd)->dev_if->dev_global_regs + + DWC_DSTS); +} + +static inline u32 otg_ctl_reg(struct dwc_pcd *pd) +{ + return (u32) ((u32) GET_CORE_IF(pd)->core_global_regs + DWC_GOTGCTL); +} + +extern int __init dwc_otg_pcd_init(struct device *dev); + +/* + * The following functions support managing the DWC_otg controller in device + * mode. + */ +extern void dwc_otg_ep_activate(struct core_if *core_if, struct dwc_ep *ep); +extern void dwc_otg_ep_start_transfer(struct core_if *_if, struct dwc_ep *ep); +extern void dwc_otg_ep_set_stall(struct core_if *core_if, struct dwc_ep *ep); +extern void dwc_otg_ep_clear_stall(struct core_if *core_if, struct dwc_ep *ep); +extern void dwc_otg_pcd_remove(struct device *dev); +extern int dwc_otg_pcd_handle_intr(struct dwc_pcd *pcd); +extern void dwc_otg_pcd_stop(struct dwc_pcd *pcd); +extern void request_nuke(struct pcd_ep *ep); +extern void dwc_otg_pcd_update_otg(struct dwc_pcd *pcd, const unsigned reset); +extern void dwc_otg_ep0_start_transfer(struct core_if *_if, struct dwc_ep *ep); + +extern void request_done(struct pcd_ep *ep, struct pcd_request *req, + int _status); + +extern void start_next_request(struct pcd_ep *ep); +#endif -- 1.6.1.rc3 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html