Introduced the suspend/resume function for the OMAP4430 internal PHY.
This will be used by the twl6030-usb transceiver driver.
Moved the clock enable/disable function calls and power on/off of the PHY
code from power on/off functions to suspend/resume function.
Signed-off-by: Hema HK <hemahk@xxxxxx>
Cc: Felipe Balbi <balbi@xxxxxx>
Cc: Tony Lindgren <tony@xxxxxxxxxxx>
---
arch/arm/mach-omap2/omap_phy_internal.c | 22 +++++++++++++++-------
1 file changed, 15 insertions(+), 7 deletions(-)
Index: linux-2.6/arch/arm/mach-omap2/omap_phy_internal.c
===================================================================
--- linux-2.6.orig/arch/arm/mach-omap2/omap_phy_internal.c
+++ linux-2.6/arch/arm/mach-omap2/omap_phy_internal.c
@@ -103,13 +103,6 @@ int omap4430_phy_set_clk(struct device *
int omap4430_phy_power(struct device *dev, int ID, int on)
{
if (on) {
- /* enabled the clocks */
- omap4430_phy_set_clk(dev, 1);
- /* power on the phy */
- if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
- __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
- mdelay(200);
- }
if (ID)
/* enable VBUS valid, IDDIG groung */
__raw_writel(AVALID | VBUSVALID, ctrl_base +
@@ -125,10 +118,25 @@ int omap4430_phy_power(struct device *de
/* Enable session END and IDIG to high impedence. */
__raw_writel(SESSEND | IDDIG, ctrl_base +
USBOTGHS_CONTROL);
+ }
+ return 0;
+}
+
+int omap4430_phy_suspend(struct device *dev, int suspend)
+{
+ if (suspend) {
/* Disable the clocks */
omap4430_phy_set_clk(dev, 0);
/* Power down the phy */
__raw_writel(PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ } else {
+ /* Enable the internel phy clcoks */
+ omap4430_phy_set_clk(dev, 1);
+ /* power on the phy */
+ if (__raw_readl(ctrl_base + CONTROL_DEV_CONF) & PHY_PD) {
+ __raw_writel(~PHY_PD, ctrl_base + CONTROL_DEV_CONF);
+ mdelay(200);
+ }
}
return 0;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
