on ST Micro Connect Lite we have 4 port
Part A and B for the JTAG
Port C Uart
Port D for PIO
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@xxxxxxxxxxxx>
---
Hi Greg,
I known that I'm a bit late but it will be nice
to get it in the v2.6.28 release
tks by advance
Best Regards,
J.
drivers/usb/serial/ftdi_sio.c | 26 ++++++++++++++++++++++++++
drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++
2 files changed, 32 insertions(+), 0 deletions(-)
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index a2668d0..861cba3d 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -100,6 +100,7 @@ struct ftdi_sio_quirk {
static int ftdi_jtag_probe(struct usb_serial *serial);
static int ftdi_mtxorb_hack_setup(struct usb_serial *serial);
static int ftdi_NDI_device_setup(struct usb_serial *serial);
+static int ftdi_stmclite_probe(struct usb_serial *serial);
static void ftdi_USB_UIRT_setup(struct ftdi_private *priv);
static void ftdi_HE_TIRA1_setup(struct ftdi_private *priv);
@@ -123,6 +124,10 @@ static struct ftdi_sio_quirk ftdi_HE_TIRA1_quirk = {
.port_probe = ftdi_HE_TIRA1_setup,
};
+static struct ftdi_sio_quirk ftdi_stmclite_quirk = {
+ .probe = ftdi_stmclite_probe,
+};
+
/*
* The 8U232AM has the same API as the sio except for:
* - it can support MUCH higher baudrates; up to:
@@ -800,6 +805,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) },
{ USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(ST_VID, ST_STMCLT1030_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1699,6 +1706,25 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
}
/*
+ * First and second port on STMCLiteadaptors is reserved for JTAG interface
+ * and the forth port for pio
+ */
+static int ftdi_stmclite_probe(struct usb_serial *serial)
+{
+ struct usb_device *udev = serial->dev;
+ struct usb_interface *interface = serial->interface;
+
+ dbg("%s", __func__);
+
+ if (interface == udev->actconfig->interface[2])
+ return 0;
+
+ dev_info(&udev->dev, "Ignoring serial port reserved for JTAG\n");
+
+ return -ENODEV;
+}
+
+/*
* The Matrix Orbital VK204-25-USB has an invalid IN endpoint.
* We have to correct it if we want to read from it.
*/
diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h
index bf08672..38a21d9 100644
--- a/drivers/usb/serial/ftdi_sio_ids.h
+++ b/drivers/usb/serial/ftdi_sio_ids.h
@@ -1022,6 +1022,12 @@
#define WHT_PID 0x0004 /* Wireless Handheld Terminal */
/*
+ * STMicroelectonics
+ */
+#define ST_VID 0x0483
+#define ST_STMCLT1030_PID 0x3747 /* ST Micro Connect Lite STMCLT1030 */
+
+/*
* Papouch products (http://www.papouch.com/)
* Submitted by Folkert van Heusden
*/
--
1.7.2.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
