Greg,
I apologize for the delay. Finally I managed to configure sendmail to relay messages via my ISP SMTP (Too bad, my ISP blocks port 25).
Below you can find patch generated off your 2.6.37-rc7 usb branch. Please let me know if you have any problem to apply this.
Thank you in advance,
Vadim.
Added mct_u232_ioctl (implements TIOCMIWAIT command), mct_u232_get_icount (implements TIOCGICOUNT command) and mct_u232_msr_to_icount functions. MCT U232 P9 is one of a few usb to serail adapters which converts USB +/-5v voltage levels to COM +/-15 voltages. So it can also power COM interfaced devices. This makes it very usable for legacy COM interfaced data-acquisition hardware. I tested new implementation with AWARE Electronics RM-60 radiation meter, which sends pulse via RNG COM line whenever new particle is registered.
Signed-off-by: Vadim Tsozik <tsozik@xxxxxxxxx>
---
Patch below is based on linux-2.6.37-rc7
--- usb/serial/mct_u232.c.orig 2010-12-26 16:54:16.660294924 -0500
+++ usb/serial/mct_u232.c 2010-12-27 15:29:30.895141755 -0500
@@ -78,6 +78,8 @@
#include <asm/unaligned.h>
#include <linux/usb.h>
#include <linux/usb/serial.h>
+#include <linux/serial.h>
+#include <linux/ioctl.h>
#include "mct_u232.h"
/*
@@ -104,6 +106,10 @@ static void mct_u232_break_ctl(struct tt
static int mct_u232_tiocmget(struct tty_struct *tty, struct file *file);
static int mct_u232_tiocmset(struct tty_struct *tty, struct file *file,
unsigned int set, unsigned int clear);
+static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg);
+static int mct_u232_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount);
static void mct_u232_throttle(struct tty_struct *tty);
static void mct_u232_unthrottle(struct tty_struct *tty);
@@ -150,9 +156,10 @@ static struct usb_serial_driver mct_u232
.tiocmset = mct_u232_tiocmset,
.attach = mct_u232_startup,
.release = mct_u232_release,
+ .ioctl = mct_u232_ioctl,
+ .get_icount = mct_u232_get_icount,
};
-
struct mct_u232_private {
spinlock_t lock;
unsigned int control_state; /* Modem Line Setting (TIOCM) */
@@ -160,6 +167,9 @@ struct mct_u232_private {
unsigned char last_lsr; /* Line Status Register */
unsigned char last_msr; /* Modem Status Register */
unsigned int rx_flags; /* Throttling flags */
+ struct async_icount icount;
+ wait_queue_head_t msr_wait; /* for handling sleeping while waiting
+ for msr change to happen */
};
#define THROTTLED 0x01
@@ -386,6 +396,20 @@ static int mct_u232_get_modem_stat(struc
return rc;
} /* mct_u232_get_modem_stat */
+static void mct_u232_msr_to_icount(struct async_icount *icount,
+ unsigned char msr)
+{
+ /* Translate Control Line states */
+ if (msr & MCT_U232_MSR_DDSR)
+ icount->dsr++;
+ if (msr & MCT_U232_MSR_DCTS)
+ icount->cts++;
+ if (msr & MCT_U232_MSR_DRI)
+ icount->rng++;
+ if (msr & MCT_U232_MSR_DCD)
+ icount->dcd++;
+} /* mct_u232_msr_to_icount */
+
static void mct_u232_msr_to_state(unsigned int *control_state,
unsigned char msr)
{
@@ -422,6 +446,7 @@ static int mct_u232_startup(struct usb_s
if (!priv)
return -ENOMEM;
spin_lock_init(&priv->lock);
+ init_waitqueue_head(&priv->msr_wait);
usb_set_serial_port_data(serial->port[0], priv);
init_waitqueue_head(&serial->port[0]->write_wait);
@@ -621,6 +646,8 @@ static void mct_u232_read_int_callback(s
/* Record Control Line states */
mct_u232_msr_to_state(&priv->control_state, priv->last_msr);
+ mct_u232_msr_to_icount(&priv->icount, priv->last_msr);
+
#if 0
/* Not yet handled. See belkin_sa.c for further information */
/* Now to report any errors */
@@ -647,6 +674,7 @@ static void mct_u232_read_int_callback(s
tty_kref_put(tty);
}
#endif
+ wake_up_interruptible(&priv->msr_wait);
spin_unlock_irqrestore(&priv->lock, flags);
exit:
retval = usb_submit_urb(urb, GFP_ATOMIC);
@@ -826,7 +854,6 @@ static void mct_u232_throttle(struct tty
}
}
-
static void mct_u232_unthrottle(struct tty_struct *tty)
{
struct usb_serial_port *port = tty->driver_data;
@@ -847,6 +874,82 @@ static void mct_u232_unthrottle(struct t
}
}
+static int mct_u232_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ DEFINE_WAIT(wait);
+ struct usb_serial_port *port = tty->driver_data;
+ struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
+ struct async_icount cnow, cprev;
+ unsigned long flags;
+
+ dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
+
+ switch (cmd) {
+
+ case TIOCMIWAIT:
+
+ dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
+
+ spin_lock_irqsave(&mct_u232_port->lock, flags);
+ cprev = mct_u232_port->icount;
+ spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+ for ( ; ; ) {
+ prepare_to_wait(&mct_u232_port->msr_wait,
+ &wait, TASK_INTERRUPTIBLE);
+ schedule();
+ finish_wait(&mct_u232_port->msr_wait, &wait);
+ /* see if a signal did it */
+ if (signal_pending(current))
+ return -ERESTARTSYS;
+ spin_lock_irqsave(&mct_u232_port->lock, flags);
+ cnow = mct_u232_port->icount;
+ spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+ if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
+ cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
+ return -EIO; /* no change => error */
+ if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+ ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+ ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
+ ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+ return 0;
+ }
+ cprev = cnow;
+ }
+
+ }
+ return -ENOIOCTLCMD;
+}
+
+static int mct_u232_get_icount(struct tty_struct *tty,
+ struct serial_icounter_struct *icount)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct mct_u232_private *mct_u232_port = usb_get_serial_port_data(port);
+ struct async_icount *ic = &mct_u232_port->icount;
+ unsigned long flags;
+
+ spin_lock_irqsave(&mct_u232_port->lock, flags);
+
+ icount->cts = ic->cts;
+ icount->dsr = ic->dsr;
+ icount->rng = ic->rng;
+ icount->dcd = ic->dcd;
+ icount->rx = ic->rx;
+ icount->tx = ic->tx;
+ icount->frame = ic->frame;
+ icount->overrun = ic->overrun;
+ icount->parity = ic->parity;
+ icount->brk = ic->brk;
+ icount->buf_overrun = ic->buf_overrun;
+
+ spin_unlock_irqrestore(&mct_u232_port->lock, flags);
+
+ dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d",
+ __func__, port->number, icount->rx, icount->tx);
+ return 0;
+}
+
static int __init mct_u232_init(void)
{
int retval;
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
