On Fri, Dec 10, 2010 at 12:34:18PM +0530, Hema HK wrote:
Adding the twl6030-usb transceiver support for OMAP4 musb driver. OMAP4 supports 2 types of transceiver interface. 1. UTMI: The PHY is embedded within OMAP4. The transceiver functionality is split between the twl6030 PMIC chip and OMAP4430. The VBUS, ID pin sensing and OTG SRP generation part is integrated in TWL6030 and UTMI PHY functionality is embedded within the OMAP4430. There is no direct interactions between the MUSB controller and TWL6030 chip to communicate the session-valid, session-end and ID-GND events. It has to be done through a software by setting/resetting bits in one of the control module register of OMAP4430 which in turn toggles the appropriate signals to MUSB controller. The internal transceiver has functional clocks and powerdown bits to powerdown the PHY for power saving. Since there is no option available for having 2 transceiver drivers for one USB controller, internal PHY specific APIs are passed through plaform_data function pointers to use in the twl6030-usb transceiver driver. 2. ULPI interface is provided for off-chip transceivers. Signed-off-by: Hema HK <hemahk@xxxxxx> Cc: Felipe Balbi <balbi@xxxxxx> Cc: Tony Lindgren <tony@xxxxxxxxxxx> Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx> --- arch/arm/mach-omap2/omap_phy_internal.c | 149 +++++++++
this file will never be compiled. -- balbi -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html