that's not used anymore. So let's drop it.
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
---
drivers/usb/musb/am35x.c | 2 --
drivers/usb/musb/blackfin.c | 1 -
drivers/usb/musb/da8xx.c | 2 --
drivers/usb/musb/davinci.c | 1 -
drivers/usb/musb/musb_core.c | 1 -
drivers/usb/musb/musb_core.h | 5 -----
drivers/usb/musb/omap2430.c | 3 ---
7 files changed, 0 insertions(+), 15 deletions(-)
diff --git a/drivers/usb/musb/am35x.c b/drivers/usb/musb/am35x.c
index fdc7c88..62e65f0 100644
--- a/drivers/usb/musb/am35x.c
+++ b/drivers/usb/musb/am35x.c
@@ -421,8 +421,6 @@ static int am35x_musb_init(struct musb *musb)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
- musb->board_set_vbus = am35x_musb_set_vbus;
-
/* Global reset */
sw_reset = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET);
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index df7c352..c6d3818 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -395,7 +395,6 @@ static int bfin_musb_init(struct musb *musb)
bfin_musb_reg_init(musb);
if (is_host_enabled(musb)) {
- musb->board_set_vbus = bfin_musb_set_vbus;
setup_timer(&musb_conn_timer,
musb_conn_timer_handler, (unsigned long) musb);
}
diff --git a/drivers/usb/musb/da8xx.c b/drivers/usb/musb/da8xx.c
index 27199d4..e0ef584 100644
--- a/drivers/usb/musb/da8xx.c
+++ b/drivers/usb/musb/da8xx.c
@@ -437,8 +437,6 @@ static int da8xx_musb_init(struct musb *musb)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long)musb);
- musb->board_set_vbus = da8xx_musb_set_vbus;
-
/* Reset the controller */
musb_writel(reg_base, DA8XX_USB_CTRL_REG, DA8XX_SOFT_RESET_MASK);
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index de67480..e6de097 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -404,7 +404,6 @@ static int davinci_musb_init(struct musb *musb)
if (is_host_enabled(musb))
setup_timer(&otg_workaround, otg_timer, (unsigned long) musb);
- musb->board_set_vbus = davinci_musb_set_vbus;
davinci_musb_source_power(musb, 0, 1);
/* dm355 EVM swaps D+/D- for signal integrity, and
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 1d7e5f1..2bbf911 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2000,7 +2000,6 @@ bad_config:
* - may initialize an integrated tranceiver
* - initializes musb->xceiv, usually by otg_get_transceiver()
* - stops powering VBUS
- * - assigns musb->board_set_vbus if host mode is enabled
*
* There are various transciever configurations. Blackfin,
* DaVinci, TUSB60x0, and others integrate them. OMAP3 uses
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 9a3c71f..b9ea563 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -412,11 +412,6 @@ struct musb {
struct timer_list otg_timer;
#endif
- /* called with IRQs blocked; ON/nonzero implies starting a session,
- * and waiting at least a_wait_vrise_tmout.
- */
- void (*board_set_vbus)(struct musb *, int is_on);
-
struct dma_controller *dma_controller;
struct device *controller;
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index ed4ca41..de39fa0 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -268,9 +268,6 @@ static int omap2430_musb_init(struct musb *musb)
musb_readl(musb->mregs, OTG_INTERFSEL),
musb_readl(musb->mregs, OTG_SIMENABLE));
- if (is_host_enabled(musb))
- musb->board_set_vbus = omap2430_musb_set_vbus;
-
setup_timer(&musb_idle_timer, musb_do_idle, (unsigned long) musb);
return 0;
--
1.7.3.2.343.g7d43d
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
