Hi, > > As the control.h have been moved to new location and it's > > uses are not allowed to drivers directly so moving the phy > > control, interrupt clear and reset functionality to board > > files. > > I'm not fond of the whole approach. I'm not sure why accesses to the > control registers are such a no-no, taking into account that one needs to > access such regisyter to clear the interrupt... I think Tony is the right person to answer this :) > > > Signed-off-by: Ajay Kumar Gupta<ajay.gupta@xxxxxx> > [...] > > > diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb- > musb.c [...] > > + regval&= ~AM35XX_USBOTGSS_SW_RST; > > + omap_ctrl_writel(regval, AM35XX_CONTROL_IP_SW_RESET); > > + > > + regval = omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); > > Why read it and ignore the result? This is due to recommendation for OMAPs as discussed at below Link, http://markmail.org/message/s3lp7xlyq7zxnjtc#query:+page:1+mid:kfia4ld4xgzek6kq+state:results Thanks, Ajay > > WBR, Sergei -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
