On Thu, 25 Nov 2010, Greg KH wrote: > On Thu, Nov 25, 2010 at 07:21:58PM +0300, Anton Vorontsov wrote: > > On Thu, Nov 25, 2010 at 11:58:00PM +0800, mkl0301@xxxxxxxxx wrote: > > > From: Mac Lin <mkl0301@xxxxxxxxx> > > > > > > The CNS3XXX SOC has include USB EHCI and OHCI compatible controllers. This > > > patch adds the necessary glue logic to allow ehci-hcd and ohci-hcd drivers to > > > work on CNS3XXX > > > > > > The EHCI and OHCI controllers share a common clock control and reset bit, > > > therefore additional check for the timming of enabling and disabling is > > > required. The USB bit of PLL Power Down Control is also shared by OTG, 24MHz > > > UART clock, Crypto clock, PCIe reference clock, and Clock Scale Generator. > > > Therefore we only ensure it is enabled, while not disabling it. > > > > > > Signed-off-by: Mac Lin <mkl0301@xxxxxxxxx> > > > > Thanks for the patch! > > > > Cc'ing Greg. > > > > Greg, the patch doesn't touch any sensitive parts of EHCI and OHCI > > drivers, can I take it via ARM subtree? This is to not introduce > > cross-tree dependencies (the patch depends on some arch-specific > > changes). > > Please get Alan Stern to ack it as well, as he knows the proper > callbacks that you need to ensure are present. As far as the callbacks are concerned, this looks fine. Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
