Hi Everyone,
I'm trying to get a Metrologic Quantum IS3480 barcode scanner to work
with my Linux box. It's supposed to present as a USB keyboard, but my
system (and two other Linux boxes I've tried it on) seem to unregister
it as a HID device for some reason I can't quite figure out. I thought
it might be blacklisted, but I did a quick search in hid-ids.h but the
vendor ID doesn't seem to be there... Any ideas?
Here's the dmesg output when I plug it in:
usb 7-1: new low speed USB device using uhci_hcd and address 16
input: Metrologic Metrologic Scanner as
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13
generic-usb 0003:0C2E:0200.000A: input,hidraw3: USB HID v1.11 Keyboard
[Metrologic Metrologic Scanner] on usb-0000:00:1d.1-1/input0
usb 7-1: USB disconnect, address 16
usb 7-1: new low speed USB device using uhci_hcd and address 17
and the udevadm monitor output:
KERNEL[1289756866.849673] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
KERNEL[1289756866.859563] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
KERNEL[1289756866.859674] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A (hid)
KERNEL[1289756866.872800] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13 (input)
KERNEL[1289756866.872891] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13/event7
(input)
KERNEL[1289756866.872909] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A/hidraw/hidraw3
(hidraw)
UDEV [1289756866.873915] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
UDEV [1289756866.874327] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
UDEV [1289756866.874441] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A (hid)
UDEV [1289756866.874724] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A/hidraw/hidraw3
(hidraw)
KERNEL[1289756867.166734] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13/event7
(input)
KERNEL[1289756867.216580] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13 (input)
KERNEL[1289756867.216609] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A/hidraw/hidraw3
(hidraw)
KERNEL[1289756867.216703] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A (hid)
KERNEL[1289756867.216741] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
KERNEL[1289756867.216834] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
UDEV [1289756867.216935] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A/hidraw/hidraw3
(hidraw)
UDEV [1289756867.217063] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/0003:0C2E:0200.000A (hid)
UDEV [1289756867.271298] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13 (input)
UDEV [1289756867.303544] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13/event7
(input)
UDEV [1289756867.303727] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13/event7
(input)
UDEV [1289756867.303820] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0/input/input13 (input)
UDEV [1289756867.303965] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
UDEV [1289756867.304191] remove
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
KERNEL[1289756870.808673] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
KERNEL[1289756870.817600] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
UDEV [1289756870.818662] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1 (usb)
UDEV [1289756870.837532] add
/devices/pci0000:00/0000:00:1d.1/usb7/7-1/7-1:1.0 (usb)
and the lsusb -v output:
Bus 007 Device 017: ID 0c2e:0700 Metro
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0c2e Metro
idProduct 0x0700
bcdDevice 1.00
iManufacturer 1 Metrologic
iProduct 2 Metrologic Scanner
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 41
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 3 POS USB
bmAttributes 0x80
(Bus Powered)
MaxPower 300mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
** UNRECOGNIZED: 09 21 11 01 00 01 22 3f 00
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 10
Device Status: 0x0000
(Bus Powered)
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
