From: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Commit 126512e3f274802ca65ebeca8660237f0361ad48 added support for FSL's USB controller on powerpc. In this commit the Open Firmware code was selected and compiled unconditionally. This breaks on ARM systems from FSL which use the same driver (.i.e. the i.MX series), because ARM don't have OF support (yet). This patch fixes the problem by only selecting the OF code on systems with Open Firmware support. Reported-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx> Signed-off-by: Marc Kleine-Budde <mkl@xxxxxxxxxxxxxx> Compile-Tested-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx> Acked-by: Grant Likely <grant.likely@xxxxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx> --- drivers/usb/gadget/Kconfig | 2 +- drivers/usb/host/Kconfig | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index b739ca8..607d0db 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -158,7 +158,7 @@ config USB_GADGET_FSL_USB2 boolean "Freescale Highspeed USB DR Peripheral Controller" depends on FSL_SOC || ARCH_MXC select USB_GADGET_DUALSPEED - select USB_FSL_MPH_DR_OF + select USB_FSL_MPH_DR_OF if OF help Some of Freescale PowerPC processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2391c39..6f4f8e6 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -122,7 +122,7 @@ config USB_EHCI_FSL bool "Support for Freescale on-chip EHCI USB controller" depends on USB_EHCI_HCD && FSL_SOC select USB_EHCI_ROOT_HUB_TT - select USB_FSL_MPH_DR_OF + select USB_FSL_MPH_DR_OF if OF ---help--- Variation of ARC USB block used in some Freescale chips. -- 1.7.1 -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
