From: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Since commit 461972d8a4c94bc44f11a13046041c78a7cf18dd (musb_core: don't call
musb_platform_exit() twice), unloading the driver module results in a WARNING
"kobject: '(null)' (c73de788): is not initialized, yet kobject_put() is being
called." (or even kernel oops) on e.g. DaVincis, though only in the OTG mode.
There exists dubious and unbalanced put_device() call in musb_free() which
takes place only in the OTG mode. As this commit caused musb_platform_exit()
to be called (and so unregister the NOP transceiver) before this put_device()
call, this function references already freed memory.
On the other hand, all the glue layers miss the otg_put_transceiver() call,
complementary to the otg_get_transceiver() call that they do. So, I think
the solution is to get rid of the strange put_device() call, and instead
call otg_put_transceiver() in the glue layers...
Signed-off-by: Sergei Shtylyov <sshtylyov@xxxxxxxxxxxxx>
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Felipe Balbi <balbi@xxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxx>
---
drivers/usb/musb/blackfin.c | 1 +
drivers/usb/musb/davinci.c | 2 ++
drivers/usb/musb/musb_core.c | 4 ----
drivers/usb/musb/omap2430.c | 1 +
drivers/usb/musb/tusb6010.c | 4 ++++
5 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/musb/blackfin.c b/drivers/usb/musb/blackfin.c
index b611420..9733fe9 100644
--- a/drivers/usb/musb/blackfin.c
+++ b/drivers/usb/musb/blackfin.c
@@ -397,5 +397,6 @@ int musb_platform_exit(struct musb *musb)
gpio_free(musb->config->gpio_vrsel);
+ otg_put_transceiver(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c
index 5762436..6e67629 100644
--- a/drivers/usb/musb/davinci.c
+++ b/drivers/usb/musb/davinci.c
@@ -446,6 +446,7 @@ int __init musb_platform_init(struct musb *musb, void *board_data)
fail:
clk_disable(musb->clock);
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return -ENODEV;
}
@@ -496,6 +497,7 @@ int musb_platform_exit(struct musb *musb)
clk_disable(musb->clock);
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 472b2a7..7e2c353 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1926,10 +1926,6 @@ static void musb_free(struct musb *musb)
dma_controller_destroy(c);
}
-#ifdef CONFIG_USB_MUSB_OTG
- put_device(musb->xceiv->dev);
-#endif
-
#ifdef CONFIG_USB_MUSB_HDRC_HCD
usb_put_hcd(musb_to_hcd(musb));
#else
diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c
index 2111a24..ed618bd 100644
--- a/drivers/usb/musb/omap2430.c
+++ b/drivers/usb/musb/omap2430.c
@@ -320,5 +320,6 @@ int musb_platform_exit(struct musb *musb)
musb_platform_suspend(musb);
+ otg_put_transceiver(musb->xceiv);
return 0;
}
diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c
index 3c48e77..bde40ef 100644
--- a/drivers/usb/musb/tusb6010.c
+++ b/drivers/usb/musb/tusb6010.c
@@ -1152,6 +1152,8 @@ done:
if (ret < 0) {
if (sync)
iounmap(sync);
+
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
}
return ret;
@@ -1166,6 +1168,8 @@ int musb_platform_exit(struct musb *musb)
musb->board_set_power(0);
iounmap(musb->sync_va);
+
+ otg_put_transceiver(musb->xceiv);
usb_nop_xceiv_unregister();
return 0;
}
--
1.7.2
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
