[PATCH] USB: disable endpoints after unbinding interfaces, not before

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This patch (as1430) fixes a bug in usbcore.  When a device
configuration change occurs or a device is removed, the endpoints for
the old config should be completely disabled.  However it turns out
they aren't; this is because usb_unbind_interface() calls
usb_enable_interface() or usb_set_interface() to put interfaces back
in altsetting 0, which re-enables the interfaces' endpoints.

As a result, when a device goes through a config change or is
unconfigured, the ep_in[] and ep_out[] arrays may be left holding old
pointers to usb_host_endpoint structures.  If the device is
deauthorized these structures get freed, and the stale pointers cause
errors when the the device is eventually unplugged.

The solution is to disable the endpoints after unbinding the
interfaces instead of before.  This isn't as large a change as it
sounds, since usb_unbind_interface() disables all the interface's
endpoints anyway before calling the driver's disconnect routine,
unless the driver claims to support "soft" unbind.

This fixes Bugzilla #19192.  Thanks to "Tom" Lei Ming for diagnosing
the underlying cause of the problem.

Signed-off-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>
Tested-by: Carsten Sommer <carsten_sommer@xxxxxxxxx>
CC: stable@xxxxxxxxxx

---

Index: usb-2.6/drivers/usb/core/message.c
===================================================================
--- usb-2.6.orig/drivers/usb/core/message.c
+++ usb-2.6/drivers/usb/core/message.c
@@ -1141,13 +1141,6 @@ void usb_disable_device(struct usb_devic
 {
 	int i;
 
-	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
-		skip_ep0 ? "non-ep0" : "all");
-	for (i = skip_ep0; i < 16; ++i) {
-		usb_disable_endpoint(dev, i, true);
-		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
-	}
-
 	/* getting rid of interfaces will disconnect
 	 * any drivers bound to them (a key side effect)
 	 */
@@ -1177,6 +1170,13 @@ void usb_disable_device(struct usb_devic
 		if (dev->state == USB_STATE_CONFIGURED)
 			usb_set_device_state(dev, USB_STATE_ADDRESS);
 	}
+
+	dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__,
+		skip_ep0 ? "non-ep0" : "all");
+	for (i = skip_ep0; i < 16; ++i) {
+		usb_disable_endpoint(dev, i, true);
+		usb_disable_endpoint(dev, i + USB_DIR_IN, true);
+	}
 }
 
 /**

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Linux Media]     [Linux Input]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]     [Old Linux USB Devel Archive]

  Powered by Linux