Hema HK <hemahk@xxxxxx> writes: > Cc: Felipe Balbi <balbi@xxxxxx> > Cc: Tony Lindgren <tony@xxxxxxxxxxx> > Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > Cc: Cousson, Benoit <b-cousson@xxxxxx> > Cc: Paul Walmsley <paul@xxxxxxxxx> > > This patch series makes OMAP2PLUS musb Module implemented > in HWMOD FW way. It also implements musb driver to > use the runtime pm apis. > > PATCH[1/8 v3] and [PATCH 2/8 v3] are the pre-requisites for the hwmod > support for the usb module. > > [PATCH 9/9 v3] Is offmode fix for usb in idle path using runtime > pm apis. > > As per the OMAP usbotg specification[1] musb sysconfig register > has to be set to force idle and force standby when not used > and set smart idle/standby during operation.otherwise core-off > will be prevented by musb. > > [1]: http://focus.ti.com/pdfs/wtbu/SWPU223D_Final_EPDF_06_07_2010.pdf > > This patch series is created top of "origin/pm-core" and below patch > > OMAP2+: GPIO: move late PM out of interrupts-disabled idle path > [https://patchwork.kernel.org/patch/176172/] > by Kevin > > This patch series is tested on OMAP3630 zoom3, OMAP4430 SDP OMAP2430SDP. > On OMAP3630 zoom3, off mode is tested on "origin/pm" branch using > omap3_pm_defconfig. Can you report some more details of what was tested: OTG mode? peripheral mode? if so what drivers? host mode? if so, what mode? mass storage? etc. Did the system still hit full-chip RET (or OFF) in idle? in suspend? did USB still work afterwards, etc. Also, please fix up the subjects of the patches. Only the drivers/usb stuff should be prefixed with 'usb: musb:', the OMAP-specific code should be prefixed with 'OMAP...' Thanks, Kevin > Version History: > --------------- > Version v3 > > Added the patch for adding the hwmod database for OMAP2430. > > Re-arranged the patches in such a way that first migrate the musb driver > to use the runtime pm apis and then added a patch to support offmode in idle path. > Calling the runtime pm apis before disabling the interupts in the idle path. > > Added the #ifdef CONFIG_PM_RUNTIME check in the musb core driver for calling > the runtime PM APIs as non-omap platforms may not have the runtime pm enabled > and clk_enable/disable should be called for them. > > Optimized the context save restore of musb registers only if the next state is > going to offmode and previous state was offmode. > > Addressed few review comments on coding styles. > > Some of the links for v2 review comments > ---------------------------------------- > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg34068.html > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg32024.html > http://www.spinics.net/lists/linux-usb/msg35562.html > http://www.spinics.net/lists/linux-usb/msg35720.html > > Vesrion v2: > > Fixed review comments. > Removed the omap_hwmod.h inclusion from musb.h file which was > breaking the non-omap platform build. > Using the runtime pm apis in the idle path(interrupts disabled). > Added the omap4 hwmod data base. > > Version v1: > initial version of the patch series. > > Some of the links for v1 > ------------------------ > > http://www.spinics.net/lists/linux-usb/msg34570.html > http://www.spinics.net/lists/linux-omap/msg34568.html > http://www.spinics.net/lists/linux-usb/msg34544.html > http://www.spinics.net/lists/linux-usb/msg34540.html > http://www.spinics.net/lists/linux-usb/msg34589.html > http://www.spinics.net/lists/linux-usb/msg34554.html > http://www.mail-archive.com/linux-omap@xxxxxxxxxxxxxxx/msg32973.html > > > Cousson, Benoit (1): > usb: musb: HWMOD database structures addition for OMAP4 > > Hema HK (8): > usb: musb: Adding names for IRQs in resource structure > usb: musb: Remove board_data parameter from musb_platform_init() > usb: musb: HWMOD database structures addition for OMAP3 > usb: musb: HWMOD database structures addition for OMAP2430 > usb: musb: Using omap_device_build for musb device registration > OMAP: Hwmod api changes > usb : musb: Using runtime pm apis for musb. > usb : musb: Offmode fix for idle path > > arch/arm/mach-davinci/usb.c | 2 + > arch/arm/mach-omap2/cpuidle34xx.c | 1 + > arch/arm/mach-omap2/omap_hwmod.c | 19 ++- > arch/arm/mach-omap2/omap_hwmod_2430_data.c | 102 ++++++++++++++++ > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 105 +++++++++++++++++ > arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 99 ++++++++++++++++ > arch/arm/mach-omap2/pm34xx.c | 3 + > arch/arm/mach-omap2/usb-musb.c | 175 ++++++++++++++++++++++------ > arch/arm/plat-omap/include/plat/usb.h | 2 + > arch/blackfin/mach-bf527/boards/cm_bf527.c | 2 + > arch/blackfin/mach-bf527/boards/ezbrd.c | 2 + > arch/blackfin/mach-bf527/boards/ezkit.c | 2 + > arch/blackfin/mach-bf548/boards/cm_bf548.c | 2 + > arch/blackfin/mach-bf548/boards/ezkit.c | 2 + > drivers/usb/musb/blackfin.c | 2 +- > drivers/usb/musb/cppi_dma.c | 2 +- > drivers/usb/musb/davinci.c | 2 +- > drivers/usb/musb/musb_core.c | 40 ++++++- > drivers/usb/musb/musb_core.h | 2 +- > drivers/usb/musb/musbhsdma.c | 2 +- > drivers/usb/musb/omap2430.c | 63 ++++------ > drivers/usb/musb/tusb6010.c | 2 +- > include/linux/usb/musb.h | 13 ++ > 23 files changed, 560 insertions(+), 86 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
