Hema HK <hemahk@xxxxxx> writes: > OMAP3 hwmod data stuctures are populated with base address, L3 and L4 > interface clocks, IRQs,and sysconfig register details. This has been requested for the other hwmod conversions as well: Subject prefix for the arch/arm/mach-omap2/* code should be OMAP: (or OMAP2+, OMAP3, OMAP4, etc. For this patch, should be something lke OMAP3: hwmod data: add USB OTG" > Signed-off-by: Hema HK <hemahk@xxxxxx> > Cc: Felipe Balbi <balbi@xxxxxx> > Cc: Tony Lindgren <tony@xxxxxxxxxxx> > Cc: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx> > Cc: Cousson, Benoit <b-cousson@xxxxxx> > Cc: Paul Walmsley <paul@xxxxxxxxx> > > --- > arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 101 +++++++++++++++++++++++++++++ > 1 file changed, 101 insertions(+) > > Index: linux-omap-pm/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c > =================================================================== > --- linux-omap-pm.orig/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c > +++ linux-omap-pm/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c > @@ -82,6 +82,16 @@ static struct omap_hwmod omap3xxx_l3_mai > }; > > static struct omap_hwmod omap3xxx_l4_wkup_hwmod; > +static struct omap_hwmod omap3xxx_usbhsotg_hwmod; > + > +/* L3 <- USBHSOTG interface */ > +static struct omap_hwmod_ocp_if omap3xxx_usbhsotg__l3 = { > + .master = &omap3xxx_usbhsotg_hwmod, > + .slave = &omap3xxx_l3_main_hwmod, > + .clk = "core_l3_ick", > + .user = OCP_USER_MPU, > +}; > + > > /* L4_CORE -> L4_WKUP interface */ > static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { > @@ -90,6 +100,37 @@ static struct omap_hwmod_ocp_if omap3xxx > .user = OCP_USER_MPU | OCP_USER_SDMA, > }; > > +/* > +* USBHSOTG interface data > +*/ > + > +static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { > + { > + .pa_start = OMAP34XX_HSUSB_OTG_BASE, > + .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, > + .flags = ADDR_TYPE_RT > + }, > +}; > + > +/* USBHSOTG <- L4_CORE interface */ > +static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { > + .master = &omap3xxx_l4_core_hwmod, > + .slave = &omap3xxx_usbhsotg_hwmod, > + .clk = "l4_ick", > + .addr = omap3xxx_usbhsotg_addrs, > + .addr_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_addrs), > + .user = OCP_USER_MPU, > + > +}; > + > +static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_masters[] = { > + &omap3xxx_usbhsotg__l3, > +}; > + > +static struct omap_hwmod_ocp_if *omap3xxx_usbhsotg_slaves[] = { > + &omap3xxx_l4_core__usbhsotg, > +}; > + > /* Slave interfaces on the L4_CORE interconnect */ > static struct omap_hwmod_ocp_if *omap3xxx_l4_core_slaves[] = { > &omap3xxx_l3_main__l4_core, > @@ -197,6 +238,69 @@ static struct omap_hwmod omap3xxx_iva_hw > .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) > }; > > +/* > + * USBHSOTG (USBHS) > + */ > +static struct omap_hwmod_class_sysconfig omap3xxx_usbhsotg_sysc = { > + .rev_offs = 0x0400, > + .sysc_offs = 0x0404, > + .syss_offs = 0x0408, > + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE| > + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | > + SYSC_HAS_AUTOIDLE), > + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | > + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), > + .sysc_fields = &omap_hwmod_sysc_type1, > +}; > + > +static struct omap_hwmod_class usbotg_class = { > + .name = "usbotg", > + .sysc = &omap3xxx_usbhsotg_sysc, > +}; > + > +/* usb_otg_hs */ > +static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { > + > + { .name = "mc", .irq = 92 }, > + { .name = "dma", .irq = 93 }, > + > +}; > + > +static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { > + .name = "usb_otg_hs", > + .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs, > + .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_mpu_irqs), > + .main_clk = "hsotgusb_ick", > + .prcm = { > + .omap2 = { > + .prcm_reg_id = 1, > + .module_bit = OMAP3430_GRPSEL_HSOTGUSB_MASK, As pointed out by Paul on some of the other hwmod conversions, this bit should be using EN bit, not the GRPSEL mask, namely OMAP3430_EN_HSOTGUSB_SHIFT > + .module_offs = CORE_MOD, > + .idlest_reg_id = 1, > + .idlest_idle_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT, > + .idlest_stdby_bit = OMAP3430ES2_ST_HSOTGUSB_STDBY_SHIFT > + }, > + }, > + .masters = omap3xxx_usbhsotg_masters, > + .masters_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_masters), > + .slaves = omap3xxx_usbhsotg_slaves, > + .slaves_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_slaves), > + .class = &usbotg_class, > + > + /* > + * Errata ID: i479 idle_req / idle_ack mechanism potentially > + * broken when autoidle is enabled > + * workaround is to disable the autodile bit at module level. > + * > + * As per OMAP USBOTG specification, need to configure the USBOTG > + * to smart idle/standby or no idle/standby during data transfer and > + * force idle/standby when not in use to support retention and offmode. > + */ > + .flags = HWMOD_NO_OCP_AUTOIDLE | HWMOD_SWSUP_SIDLE > + | HWMOD_SWSUP_MSTANDBY, > + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430) > +}; > + > static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { > &omap3xxx_l3_main_hwmod, > &omap3xxx_l4_core_hwmod, > @@ -204,6 +308,7 @@ static __initdata struct omap_hwmod *oma > &omap3xxx_l4_wkup_hwmod, > &omap3xxx_mpu_hwmod, > &omap3xxx_iva_hwmod, > + &omap3xxx_usbhsotg_hwmod, > NULL, > }; > -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html